add extern acrn_vm_pci_dev_config variables in vm_configuration.c
when ivshmem configured on scenarios with ivshmem configured.
Tracked-On: #5298
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fix the folder name where the 'acrn-manager' source code is located.
Replace instances of 'UOS' by 'User VM'
Other minor text updates to improve readability
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
generate ASL code of ACPI tables for pre-launched VMs on nuc7i7dnb,
whl-ipc-i5, whl-ipc-i7, ehl-crb-b boards
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
enable TPM2 config on ehl-crb-b board and update TPM2 configs on
legacy boards.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
For EHL hybrid_rt scenario, the requirement needs a network device
passthough to pre-launched VM0.
Tracked-On: #5286
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
use offline tool to generate one binary of ACPI tables for pre-launched
VMs, then load the ACPI binary into guest physical memory as grub module.
Users can configure the resources or devices like TPM2 for the
pre-launched VM from sceanrio XMLs or UI, and the offline tool will
generate ASL code of the ACPI tables with the configured resources or
devices, then compile the ASL code to one binary when building ACRN.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
EHL PSE TSN GbE driver is default set to use 32bit of dma addressing.
net: stmmac: configure PSE Gbe to 32bit dma addressing
https://github.com/intel/linux-intel-lts/commit/011c8f
When VM has more than 4GB physical memory, Linux kernel uses the bounce
buffers (swiotlb) to translate kernel data in 64bit memory to 32bit
range for the sake of the DMA because iommu is not available. The
default swiotlb value 32768 is insufficient to support two PSE TSN GbEs
at the same time. Increase the value to 131072 otherwise two GbEs can't
link up.
Tracked-On: #5243
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When creating a new launch setting, config app can't fine the
scenario config which caused the app failed to load the new
launch setting.
Tracked-On: #5282
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Build and install 'acrnctl' for regardless of the RELEASE value. Kata Containers
depends on 'acrnctl' in order to work correctly and we therefore need to make
sure that it is built and installed correctly regardless of whether this is a
debug or a release build.
Tracked-On: #4940
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a new scenario xml file for EHL which is derived from hybrid_rt for
validation of certain passthru devices in prelaunched RTVM. Because the
configuration requires to disable GPIO support for SOS VM, it should
not be merged into the standard hybrid_rt scenario. According to this
change, remove the SCI passthru setting from existing hybrid_rt since
from now on hybrid_rt_fusa should be used for SCI passthru test.
Tracked-On: #5278
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
minor_ver should be le 2 when major_ver == 2.
Tracked-On: #5276
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
update the size of ivshmem memory region to [2MB, 512MB].
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Always use P2SB_ as a prefix for all macro definitions related to P2SB
MMIO passthru. And introduce the new P2SB_VGPIO_DM_ENABLED macro to
indicate the presence of the pre-launched VM which requires the feature.
This macro intends to be used to enclose source files with ifdef where
macros defined by config-tool being used which are available only when
the feature is enabled. It is required to avoid causing compilation
errors when users build HV without enabling the feature.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Two PSE-GPIO controllers of EHL CRB require MSI-X emulation for
pass-thru because it uses multiple MSI vectors. Currently acrn-config
enables MSI-X emulation for only TSN devices. Enable MSI-X emulation
for PSE-GPIOs, too.
Tracked-On: #5242
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
After below commit in https://github.com/zephyrproject-rtos/zephyr
commit d0126a037d23484feebba00d2c0eac27e6393fef
Author: Zide Chen <zide.chen@intel.com>
Date: Wed Feb 5 08:32:00 2020 -0800
boards/x86/acrn: build it in x86_64 mode and switch to X2APIC
The zephyr image for acrn would be built in x86_64 mode by default, then the
load/entry address for pre-launched Zephyr image should be changed from
0x100000 to 0x8000 accordingly per below definition in zephyr .ld file:
zephyrproject_src/zephyr/include/arch/x86/intel64/linker.ld
SECTIONS
{
/*
* The "locore" must be in the 64K of RAM, so that 16-bit code (with
* segment registers == 0x0000) and 32/64-bit code agree on addresses.
* ... there is no 16-bit code yet, but there will be when we add SMP.
*/
.locore 0x8000 : ALIGN(16)
{
_locore_start = .;
The commit in zephyrproject is merged before zephyr v2.2 release, so from v2.2
on, HV need this fix to boot Zephyr as pre-launched VM.
Tracked-On: #5259
Signed-off-by: Victor Sun <victor.sun@intel.com>
ACRN 2.1 supports two virtual boot modes, deprivilege boot mode and
direct boot mode. The deprivilege boot mode’s main purpose is to support
booting Clear Linux Service VM with UEFI service support, but this
brings scalability problems when porting ACRN to new Intel platforms.
For the 2.2 release, deprivilege mode is removed, and only direct boot
is supported, and with this we've removed support for Clear Linux as the
service VM, which impacts over 50 ACRN documents. This PR removes
documents we don't intend to update, and fixes broken links that would
occur from references to these deleted docs.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Convert SERIAL_PCI_BDF string value to hex value.
Tracked-On: #4937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Tested-by: Shuo A Liu <shuo.a.liu@intel.com>
Users can add one or more ivshmem shm regions for uos when the shm
regions are configured from scenario setting.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add shm_region config in default launch XMLs to configure Inter-
VM communication for post-launched VMs.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to expose GPIO chassis interrupts as INTx to safety VM for
EHL. User can configure this per-VM attribute in scenario xml using the
following format:
<pt_intx desc="pt intx mapping.">
(phys_gsi0, virt_gsi0), (phys_gsi1, virt_gsi1), (phys_gsiN, virt_gsiN)
</pt_intx>
The physical and virtual interrupt gsi in each pair are separated by a
comma and enclosed in parentheses. If an integer begins with 0x or 0X,
it is hexadecimal, otherwise, it is assumed to be decimal. Example:
<pt_intx desc="pt intx mapping.">
(1, 0), (0x3, 1), (0x4, 2), (5, 6), (89, 0x12)
</pt_intx>
Tracked-On: #5241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This patch is to support direct assignment of P2SB bridge to one pre-launched
VM for EHL. User can configure this per-VM attribute in scenario xml:
<mmio_resources desc="MMIO resources.">
<p2sb>y</p2sb>
</mmio_resources>
Set p2sb to y to passthru P2SB bridge to VM, and n otherwise.
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Add missing IVSHMEM tag in mrb board xml file to fix build issue
Correct misspelled function name
Use better error messages
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Because ivshmem memory uses hv memory, if the ivshmem feature is
enabled, HV_RAM_SIZE will include IVSHMEM_SHM_SIZE.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add hybrid_rt scenario for the ElkhartLake CRB board so that user can
launch Yocto Linux as pre-launched VM.
Tracked-On: #5238
Signed-off-by: "Nishioka, Toshiki" <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Modify clos_mask and mba_delay as a member of the union type.
2.Move HV_SUPPORTED_MAX_CLOS ,MAX_CACHE_CLOS_NUM_ENTRIES and
MAX_MBA_CLOS_NUM_ENTRIES to misc_cfg.h file.
Tracked-On: #5229
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
1.Add macro MAX_CACHE_CLOS_NUM_ENTRIES for CAT, and MAX_MBA_CLOS_NUM_ENTRIES for MBA.
MAX_MBA_CLOS_NUM_ENTRIES:
Max number of Cache Mask entries corresponding to each CLOS.
This can vary if CDP is enabled vs disabled, as each CLOS entry will have corresponding
cache mask values for Data and Code when CDP is enabled.
MAX_CACHE_CLOS_NUM_ENTRIES:
Max number of MBA delay entries corresponding to each CLOS.
2.Move VMx_VCPU_CLOS macro to misc_cfg.h head file.
Tracked-On: #5229
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
HV_SUPPORTED_MAX_CLOS:
This value represents the maximum CLOS that is allowed by ACRN hypervisor.
This value is set to be least common Max CLOS (CPUID.(EAX=0x10,ECX=ResID):EDX[15:0])
among all supported RDT resources in the platform. In other words, it is
min(maximum CLOS of L2, L3 and MBA). This is done in order to have consistent
CLOS allocations between all the RDT resources.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
add IVSHMEM config in hybrid_rt scenario on tgl-rvp board.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We use sos kernel cmdline maxcpus to limit the pCPU number of SOS
for hybrid or hybrid_rt scenarios by vcpu numbers calculation.
v2: add SOS CPU affinity calculation by total pCPU plus pCPUs
occupied by pre-launched VMs when no pcpuid configured
in SOS.
Tracked-On: #5216
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Add cfl-k700-i7 board xml and its industry xml to support ACRN industry
scenario on cfl-k700-i7 board.
Tracked-On: #5212
Signed-off-by: Victor Sun <victor.sun@intel.com>
CPU sharing between pre-launch VMs and SOS, post-launch VMs were
forbidden.
Remove the limitation.
Tracked-On: #5153
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch is to support the Inter-VM communication by IVSHMEM
in config tool.
Users can configure IVSHMEM_ENABLE to enable or disable Inter-VM
communication by IVSHMEM; users can configure the name, size,
communication VM IDs of the IVSHMEM devices in the VM settings of
scenario xmls, then config tool will generate the related IVSHMEM
configurations for Inter-VM communication.
The config tool will do sanity check including when saving the xmls:
the format of shared memory region configuration is
[name],[size],[VM ID]:[VM ID](:[VM ID]...);
the max size of the name is 32 bytes;
the names should not be duplicated;
the mininum value of shared memory region size is 2M;
the value of shared memory region is a power of 2;
the size of share memory region should not extended the size of
available ram.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Shared memory regoins can be added or deleted or updated from
scenario settings in config app with sanity check.
v2: move IVSHMEM config to hv->FEATURES->IVSHMEM
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add IVSHMEM_ENABLED and IVSHMEM_REGION in scenario xmls to support
Inter-VM communications configuration for VMs.
v2: move IVSHMEM config into <FEATURES> section
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enable TPM passthrough configuration for pre-launched VM feature, on
TGL, by adding 'tgl-rvp' to TPM_PASSTHRU_BOARD.
Tracked-On: #5205
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Get the max number with integer list to instead string 'number'.
Tracked-On: #5199
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The default memory is 16G on TGL; the value of PLATFORM_RAM_SIZE and
SOS_RAM_SIZE is a little small in default xml.
Tracked-On: #5184
Reviewed-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
add an IVSHMEM regoin and the related configuration parameters in
hybrid_rt scenario on whl-ipc-i5. The size of the shared memory is
2M, and it is used for the communication between VM0 and VM2.
v6: rename shm name; remove unnecessary MACROs.
v7: rename MACRO for shm name; add unassigned vbdf for post-launched
VMs.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix build issue while CDP_ENABLED=y for EHL-CRB-B.
Tracked-On: #5092
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The default memory is 16G on TGL; the value of HV and sos
ramsize is a little small in default xml.
Tracked-On: # 5184
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Add a comment for SOS_VM to indicate its VM ID for better understanding;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
when CONFIG_MAX_MSIX_TABLE_NUM was set to 64, it will trigger timeout ASSERT
on WHL-I5 board.
Tracked-On: #5178
Signed-off-by: lirui34 <ruix.li@intel.com>
This patch will move the VM configuration check to pre-build stage,
a test program will do the check for pre-defined VM configuration
data before making hypervisor binary. If test failed, the make
process will be aborted. So once the hypervisor binary is built
successfully or start to run, it means the VM configuration has
been sanitized.
The patch did not add any new VM configuration check function,
it just port the original sanitize_vm_config() function from cpu.c
to static_checks.c with below change:
1. remove runtime rdt detection for clos check;
2. replace pr_err() from logmsg.h with printf() from stdio.h;
3. replace runtime call get_pcpu_nums() in ALL_CPUS_MASK macro
with static defined MAX_PCPU_NUM;
4. remove cpu_affinity check since pre-launched VM might share
pcpu with SOS VM;
The BOARD/SCENARIO parameter check and configuration folder check is
also moved to prebuild Makefile.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_affinity setup for SOS VM. Cpu affinity must be set in
scenario XML, except if no pre-launched VM on the scenario and
all pCPUs will be assigned to SOS VM in that case;
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Previously the CPU affinity of SOS VM is initialized at runtime during
sanitize_vm_config() stage, follow the policy that all physical CPUs
except ocuppied by Pre-launched VMs are all belong to SOS_VM. Now change
the process that SOS CPU affinity should be initialized at build time
and has the assumption that its validity is guarenteed before runtime.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Set guest flag value for logical partition.
Tracked-On: #5119
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove RT guest flags from logical partition
configuration.
Tracked-On: #5119
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The folders for config xmls and scenario setting source code are moved
to misc/vm_configs/xmls and misc/vm_configs/board, misc/vm_configs/scenario,
so this patch is to update config path for these folders.
Tracked-On: #5077
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add xmls/samples folders under misc/vm_configs, and make soft link for
them.
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add hybrid_rt source code for whl-ipc-i5/i7.
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Refine cpu affinity in hybrid rt xmls for whl-ipc-i5/7
2.Refine guest flag for hybrid rt xmls for whl-ipc-i5/7
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate passthru TPM information for whl-ipc-i5/i7.
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There is some macro defined in misc_cfg.h while CAT/MBA enabled.
include the missing header to solve build issue.
Tracked-On: #5092
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Now the hypervisor configuration source code layout is changed, so acrn-config
need to change accordingly to make sure XML based configuration build success;
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add acrn-config tool formated nuc7i7dnb configurations code in misc/vm_configs/
folder with new layout;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are 3 kinds of configurations in ACRN hypervisor source code: hypervisor
overall setting, per-board setting and scenario specific per-VM setting.
Currently Kconfig act as hypervisor overall setting and its souce is located at
"hypervisor/arch/x86/configs/$(BOARD).config"; Per-board configs are located at
"hypervisor/arch/x86/configs/$(BOARD)" folder; scenario specific per-VM configs
are located at "hypervisor/scenarios/$(SCENARIO)" folder.
This layout brings issues that board configs and VM configs are coupled tightly.
The board specific Kconfig file and misc_cfg.h are shared by all scenarios, and
scenario specific pci_dev.c is shared by all boards. So the user have no way to
build hypervisor binary for different scenario on different board with one
source code repo.
The patch will setup a new VM configurations layout as below:
misc/vm_configs
├── boards --> folder of supported boards
│ ├── <board_1> --> scenario-irrelevant board configs
│ │ ├── board.c --> C file of board configs
│ │ ├── board_info.h --> H file of board info
│ │ ├── pci_devices.h --> pBDF of PCI devices
│ │ └── platform_acpi_info.h --> native ACPI info
│ ├── <board_2>
│ ├── <board_3>
│ └── <board...>
└── scenarios --> folder of supported scenarios
├── <scenario_1> --> scenario specific VM configs
│ ├── <board_1> --> board specific VM configs for <scenario_1>
│ │ ├── <board_1>.config --> Kconfig for specific scenario on specific board
│ │ ├── misc_cfg.h --> H file of board specific VM configs
│ │ ├── pci_dev.c --> board specific VM pci devices list
│ │ └── vbar_base.h --> vBAR base info of VM PT pci devices
│ ├── <board_2>
│ ├── <board_3>
│ ├── <board...>
│ ├── vm_configurations.c --> C file of scenario specific VM configs
│ └── vm_configurations.h --> H file of scenario specific VM configs
├── <scenario_2>
├── <scenario_3>
└── <scenario...>
The new layout would decouple board configs and VM configs completely:
The boards folder stores kinds of supported boards info, each board folder
stores scenario-irrelevant board configs only, which could be totally got from
a physical platform and works for all scenarios;
The scenarios folder stores VM configs of kinds of working scenario. In each
scenario folder, besides the generic scenario specific VM configs, the board
specific VM configs would be put in a embedded board folder.
In new layout, all configs files will be removed out of hypervisor folder and
moved to a separate folder. This would make hypervisor LoC calculation more
precisely with below fomula:
typical LoC = Loc(hypervisor) + Loc(one vm_configs)
which
Loc(one vm_configs) = Loc(misc/vm_configs/boards/<board>)
+ LoC(misc/vm_configs/scenarios/<scenario>/<board>)
+ Loc(misc/vm_configs/scenarios/<scenario>/vm_configurations.c
+ Loc(misc/vm_configs/scenarios/<scenario>/vm_configurations.h
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the draft content about Debian packaging with something more user
friendly and complete.
I removed the version of the release.json included in the doc and
instead just include the release.json file directly.
I added comments about the configuration parameters directly in the
release.json file, using the convention already being used there.
(If we updated the json python package being used to json5, the
release.json file could include comments using // convention and things
would look a bit cleaner.)
Tracked-On: #5022
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1.Add UUID for Pre-launched RT VM.
2.Add hybrid_rt.xml for whl-ipc-i7/i5 and also add template Pre-Launched
RT sample xml.
3.Refine sanity check for load_kern_addr/entry.
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add tsn devices and the NVME device in the board xml
Tracked-On: #4831
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Config tool should keep aligning with Kconfig default value for
MAX_MSIX_TABLE_NUM.
Note: Remain the same configuration for the board which does not have
PCIe slot or NVME slot.
Tracked-On: #4994
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
1.add max MSI-X table number in board xmls.
2.leave MAX_MSIX_TABLE_NUM item to blank.
Tracked-On: #4994
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Detect and get MSI-X table number in board xmls.
Parse and generate the number for board config while 'MAX_MSIX_TABLE_NUM'
item is blank.
Tracked-On: #4994
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Update passtrough device config for ehl-crb-b launch xmls.
Tracked-On: #5016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support 6 VMs for ehl-crb-b industry xml.
Tracked-On: #5015
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
MBA_DELAY/CLOS_MASK show be exposed only if "MBA"/"L2" or "L3" existed
in rdt resource supoorted in board xml;
The default value of MBA_DELAY is 0;
The numbers of MAB_DELAY/CLOS_MASK entries is determined by:
If CDP is not enabled, the number of entries for CLOS_MASK and MBA_DELAY
is the min of CLOS_MAX of all RDT resources;
If CDP is enabled, divide the CLOS_MAX values for L3 and L2 resources
by 2 and then find the min of all RDT resources to get common_clos_max,
the number of entries for CLOS_MASK is common_clos_max*2,
the number of entries for MBA_DELAY is comm_clos_max.
Tracked-On: #4943
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Refine sanity check for RDT CLOS and MBA Delay.
Tracked-On: #4943
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Update the LICENSE year for hv files which generate by config tool.
Tracked-On: #5004
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The pci.ids database should be already prepared while tools of 'lspci'
were correctly installed and this check for pci.ids should be removed.
Tracked-On: #4989
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For the base of vuart 1 is not an invalid com base, the tools will check
the target vuart id and it's VM id if matches the other VM's. If they do
not match the error message will report to re-configuration.
Tracked-On: #4991
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. add life-mngr as a target in misc/Makefile, so it is
convenient to build and used in Yocto system.
2. add install target in life-mngr/Makefile to be packaged
into device file-system.
Tracked-On: #4870
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch adds support to configure MBA delay values from
scenario xml files just as it is done for CAT mask. This will
improve user experience when configuring RDT resource mask
values.
Tracked-On: #4943
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are three TSN devices on EHL CRB, and each of them need 32
vectors.
In order to support TSN devices, increase msix table size and irte
size.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
generate msix emulation information from known exist PCI devices for
board config.
Tracked-On: #4831
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Don't hardcode install paths. Instead of hardcoding where binaries are
installed, add variables that installer can override.
Tracked-On: #4864
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
refine sanity check for MASK_CLOS number by max clos in board xml.
Tracked-On: #4876
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Refinement GVT args for SOS kernel cmdline in scenario config xmls.
2.Refinement GVT args for launch UOS script in launch config xmls.
Tracked-On: #4869
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Update efi bootloader image file path for Yocto rootfs.
2.Remove empty check for UEFI OS loader name.
Tracked-On: #4868
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Update mrb ttys, up2 iomem and ehl-crb-b information.
Tracked-On: #4862
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, MMIO PCI BDF of ttyS was indexed by IRQ, but it may found
the wrong BDF when the IRQ was shared and it is not expected. So, the
patch uses the MMIO base to query /proc/iomem to find BDF, the waring
will get if BDF is not present in iomem.
Tracked-On: #4862
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
RDT config item is located in the 5rd layer of scenario config;
the number of CLOS_MASK config is dynamically obtained by the rdt
resource clos max in the board config;
the vcpu_clos config is dynamically added or removed when the
pcpu_id config is added or removed;
the drop-down list of vcpu_clos config is reduced by half when
CDP_ENABLED=y.
Tracked-On: #4860
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
1.Add parser and sanity check for RDT_ENABLED/CDP_ENABLED/CLOS_MASK.
2.Skip to generate RDT inforamtion when HW not support RDT or usr
select 'n' to disable RDT feature.
3.Add contiguous bit 1 check for CLOS_MASK.
Tracked-On: #4860
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Add RDT feature in scenario xmls, add set RDT_ENABLED=y, CDP_ENABLED=n
by default for industry scenario if HW support RDT.
2.Add CLOS_MASK in xmls to configurable and set them to '0xff' by
default if HW support RDT.
3.Remove configurable="0" of clos for PRE launched VM and POST VM, currently,
remain configurable="0" for SOS VM.
4.Add vcpu_clos to match the pcpu_id number, and set vcpu_clos to 0.
Tracked-On: #4860
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds xml file, both board as well scenario files
that are need to run ACRN on top of QEMU as a nested hypervisor.
Currently support is only for SDC scenario.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch sets defaults similar to generic platform configuration
when leaf features like PM_INFO, S3_INFO, S5_INFO, DRHD_INFO, CPU_BRAND,
CX_INFO, PX_INFO, MMCFG_BASE_INFO are not generated via either target
offline tool or user supplies empty field in case of emulation.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
With current acrn-config code, there would be no pci_dev.c generated
if no PCI devices were selected. This would cause a bug for logical_partition
scenario because of an old pci_dev.c is already in the folder and involved
for compiling. The configure tool should override the pci_dev.c, in this case,
to avoid building error.
Tracked-On: #4813
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use post_vm_id$(relative id) to identify each post-launched VM to
make sure simultaneous launching successfully.
Tracked-On: #4797
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add board xml and default scenario config xmls and launch config
xmls for ElkhartLake boards.
Tracked-On: #4798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Assign the right acrn-dm arguments for "Soft RT/Hard RT" VMs by
'uos_type' in webUI item tag.
Tracked-On: #4799
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove "idle=halt" from SOS boot args since the param could be handled
automatically by acrn-config according to CPU scheduler setting.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Tools: cleanup acrn_mngr pause/continue message
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Remove them from README.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed. Remove them from acrn_mngr.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
If HV relocation is enabled, either ACRN efi-stub or GRUB relocates
hypervisor image above HPA 256MB, thus we put hvlog and ramoops buffer
under 256MB to avoid conflict with hypervisor owned address.
This patch hardcodes these addresses:
0xa00000 - 0xdfffff: 4MiB for ramoops buffer
0xe00000 - 0xffffff: 2MiB for hvlog buffer
However, user can customize them to other addresses as long as it's under
256MB, available in host e820, and SOS bootarg "nokaslr" is not specified.
If HV relocation is disabled, need to make sure that these buffer
addresses are not between HV_RAM_START and HV_RAM_START + HV_RAM_SIZE.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
With this patch, we relocate hypervisor image to HPA 256MB and above,
thus the hardcoded hvlog and ramoops buffer for SOS can safely reside at
addresses under HPA 256MB, given that 1:1 mapping between SOS GPA and HPA.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
enable gvtd for waag of nuc7/nuc6 board by default.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For nuc7/nuc6/whl-ipci5/whl-ipc-i7 board, add 4 POST_STD_VM and 1
KATA_VM in their industry config xmls, and assign PCPU0-1 to these
PRE_LAUNCHED_VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse KATA VM count number from scenario config with vm_type 'KATA_VM'
and Remove MAX_KATA_VM_NUM from scenario config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When passthrough device for VM, if there is no fun0 of the slot was passed
in, PCI expansion card can not respond as a device, it must implement at
least function number 0.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine CPU affinity sanity check for both scenario and launch config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refinement for VM type sanity check relays on VM UUID number.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
remove configurable="0" for pci_devs of pre-launched VM so that the
passthru devices could be configurable on webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Parse cpu_affinity from launch config xmls and generate '--cpu_affinity' as
acrn-dm args.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.Remove cpu_sharing item from launch config xml.
2.Add cpu_affinity for launch config xmls to configurable POST VM cpu
affinity from webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Change the tag name from "vcpu_affinity" to 'cpu_affinity" in all the per
board scenario xml files, and change the descritpions.
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hypervisor is replacing vm_configs[].vcpu_affinity[] array with
cpu_affinity_bitmap, the meaning of which has some changes as well.
This patch changes the names in generated vm_configuration.c:
-.vcpu_affinity = VMx_CONFIG_VCPU_AFFINITY,
+.cpu_affinity_bitmap = VMx_CONFIG_CPU_AFFINITY,
Changes in vm_configuration.h:
-#define VMx_CONFIG_VCPU_AFFINITY {AFFINITY_CPU(xU), AFFINITY_CPU(xU)}
+#define VMx_CONFIG_CPU_AFFINITY (AFFINITY_CPU(xU) | AFFINITY_CPU(xU))
Also don't generate default assignment of vcpu_num in vm_configuration.c,
because now hypervisor can easily calculate it from cpu_affinity_bitmap.
Accordingly, in the scenario xml files, tag "vcpu_affinity" is changed
to "cpu_affinity".
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When dynamically creating or adding or deleting VMs, acrn config app
will assign VM IDs for the VMs with the orders of prelaunched VMs and SOS
VM and postlaunched VMs to be consistent with the VM order of vm_configs
in vm configuration. When dynamically creating launch scripts, acrn
config app will let users to specify the VM ID before launch setting.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
There are no board/scenario/uos_launcher attributes for created
scenario and launch settings, which causes xml mismatch error
when generating configuration files or launch scripts.
This patch is to add the attributes for scearnio and launch
settings.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add max VM count check when generating scenario XML file.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Refine some items for configuarable="0"
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add 2 UUIDs for post-launched Standard VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add SOS_IDLE for SOS cmdline so that "idle=halt" paramter will be needed
only when CPU sharing is enabled;
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
Enhance and fix some typos in the text that gets printed out from the
board_parser.py script.
Tracked-On: #4630
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Set default value for HV template.
2. Refine vuartx in template vm setting xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. modify epc_section to configurable="0".
2. add 'idle=halt' for sos bootargs to impove performance.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UI got syntax warning while loading new logical partitons xml, add
missed '</clos>' for it.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, '--out' is relative scripts run dir if it gets relative path,
Refine '--out' to source root tree if it gets relative path.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-Launched VMs need the vbar_base values pre-populated
for pass-thru PCI devices.
This patch moves the pci parser logic from board_cfg_gen to library
so that scenario_cfg_gen scripts can use pci parser routines while
generating pci_dev file logical partition scenario.
Tracked-On: #4666
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The patch enables CPU sharing feature by default, the default scheduler is
set to SCHED_BVT;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
gcc in latest clearlinux enabled the pointer-sign warning as
default. This breaks the acrn-crashlog build.
Make acrn-crashlog build issue fixed by convert to correct
pointer type.
Tracked-On: #4636
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The template xmls are used to be the dafault VM settings for dynamically
adding VMs.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
config app implements interfaces to dynamically:
create new scenario settings based on tempaltes;
create new launch settings based on templates;
add or delete VMs for scenario settings;
add or delete VMs for launch settings;
load default scenario or launch settings
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
To keep align hv source code changes, config tool doese below changes:
1. Remove UUID from scenario config files.
2. Remove severity from scenario config files.
3. Use vm type to instead load order type.
4. Use the mapped UUID data base for launch vm script configurations.
5. Unify the ui_entry_api for '--out'
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Use vm_type to instead combination of load_type/uuid/severity in config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
As it doesn't depends on the scenario, there are sos/pre launched VMS
in config xmls, emulate vhostbridge for sos vm, specify the pass-thru
PCI device for pre launched vm.
Add support to parse pci_devs for pre launched vm.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add pass-thru PCI device for pre launched vm section in config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose weaken 'scenario' from config tool, remove 'scenario' dependency
from config tool.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1) fix a bug,resend shutdown cmd only send one character
2) move out accept routine from while loop, let this thread
can read data from acrn-dm continuously.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
main.c is compiled while version.h being generated. This will
result following error:
| main.c: In function 'main':
| main.c:95:5: error: 'AP_MAJOR_VERSION' undeclared (first use in this function)
| 95 | AP_MAJOR_VERSION, AP_MINOR_VERSION,
| | ^~~~~~~~~~~~~~~~
| main.c:95:5: note: each undeclared identifier is reported only once for each function it appears in
| main.c:95:23: error: 'AP_MINOR_VERSION' undeclared (first use in this function)
| 95 | AP_MAJOR_VERSION, AP_MINOR_VERSION,
| | ^~~~~~~~~~~~~~~~
| main.c:96:5: error: 'AP_BUILD_VERSION' undeclared (first use in this function)
| 96 | AP_BUILD_VERSION, AP_BUILD_USER,
| | ^~~~~~~~~~~~~~~~
| main.c:96:23: error: 'AP_BUILD_USER' undeclared (first use in this function)
| 96 | AP_BUILD_VERSION, AP_BUILD_USER,
| | ^~~~~~~~~~~~~
| main.c:97:5: error: 'AP_BUILD_TIME' undeclared (first use in this function)
| 97 | AP_BUILD_TIME);
| | ^~~~~~~~~~~~~
Similar issues observed with usercrash too.
To fix this, add version.h header as dependency, to make sure
it is generated successfully.
Tracked-On: #4590
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
config app supports hv config in scenario setting UI.
Tracked-On: #4634
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked by: Terry Zou <terry.zou@intel.com>
Update the board defconfig to scenario config xmls, and user can configure
it from webUI.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board defconfig depends on hypervisor configurations and vm configurations,
add this to support to parse board defconfig from vm configuration.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Modify launch config tool to support passthroug GVT for WaaG by default.
Tracked-On: #4625
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Rounding HI_MMIO_START, HI_MMIO_END to the closest 1G. This avoids
round up logic in the hypervisor.
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Launch config should relay on library/common.py and launch_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Scenario config should relay on library/common.py and scenario_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board config should relay on library/common.py and board_cfg_lib, then
remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose to refine the library/common and xx_cfg_lib, should have
to expands parameters and functions to common.py firstly.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch does the following
1) Removes the limitation on BAR size for 1 GB
2) Align the BAR address to the BAR size
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As we did in commit: 697f3fc09f, need
to update IOMEM_INFO for tgl-rvp.
Tracked-On: #4582
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Added "vcpu_clos" to configuration XML, here is an example of VM2 with 2 vCPUs:
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
A macro will be generated in vm_configuration.h:
#define VM2_VCPU_CLOS {1U, 0U}
And the macro will be used in vm_configuration.c:
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
...
{
...
.clos = VM2_VCPU_CLOS,
...
}
}
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Find the 64-bit mmio window from /proc/iomem to generate HI_MMIO_START/HI_MMIO_END.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Replace SYSTEM_INFO with IOMEM_INFO for board xml files.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Need more information from iomem, so dump all the iomem information
from /proc/iomem to instead of system ram information.
Tracked-On: #4569
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Currently, config tool generate board files and scenario files in
acrn-hypervisor directory, the origin souce code would be corrupted by
the config tool. Config tool add '--out' option for user to give a path
to store the generated files, without this option, tool will generate
files in origin source code.
Tracked-On: #4517
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct mismatch PCI audio device for passthrough in nuc6cayh.
Tracked-On: #4530
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the pattern to grap the correct PCI BDF from board information
file.
Tracked-On: #4530
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. add CONFIG_scenario=y config in $(BOARD).config file so that
SCENARIO parameter will not be needed when build with xmls.
2. add CONFIG_MAX_KATA_VM_NUM;
3. add CONFIG_ENFORCE_VALIDATED_ACPI_INFO=y because all ACPI info
generated by acrn-config has been validated;
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '--enable_commit' argument since acrn-config will not use git tool any
more.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently we use separate button to generate board configuration files and
scenario configuration files for hypervisor, this is not friendly from UX
perspective. So remove redundant button on HV configuration generation.
Tracked-On: #3854
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
This commit creates the folder for hosting the temporary scenario .xml files if the folder doesn't exist to avoid the FileNotFound python exception.
Tracked-On: #4522
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
UEFI pass option as unicode string to efi-stub. That string has
no end charactor ('\0'). Insteadly, the option has string size
and we should use the string size to decide the end of the option
string.
Tracked-On: #4520
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Fix links in documentation that have moved (e.g.,
clearlinux.org/documentation moved to docs.01.org/clearlinux/latest).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
If the bus number is not 0, then malloc a virtual slot for the device,
meanwhile, it should be added to PT_SLOT for the next query, otherwise
the passthru parameter would be lost in the launch script.
Tracked-On: #4494
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
commit a68f655a11 added two extra header
include in pci_dev.c for logical_partition scenario but acrn-config did
not handle that.
This patch fix the issue.
Tracked-On: #4492
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. To keep align with acrn-hypervisor source code, remove a function
that generates ve820 file.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine HV_RAM_START to keep 2M memory align for new board config.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. If the device configure space is not fixed by ACPI and its pbar address
is above 4G or lower than 2G, then remap the vbar address to high memory.
2. Due to GPU might have huge MMIO space which would result in
HV_RAM_SIZE overflow, skip its vBAR remapping for now when the size high
than 1GB.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. refine vm number macro from scenario config.
2. add sanity check for load order.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently the life_mngr daemon has supported:
listen from the SOS shutdown command,
this patch add support listen shutdown command from RTVM.
and this life_mngr daemon can also run on SOS for listening
shutdown commond from acrn-dm(triggered by RTVM).
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yuhong, Tao <yuhong.tao@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The SOS_BOOTARGS_DIFF which defined in config xml has included most diff
bootargs, so the prints in vm_configuraton_h.py is redundant and would
cause wrong boot param for SOS VM.
Tracked-On: #4470
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for,
1. Storing MBA resource and its max supported clos value
in the target xml file under clos subsection.
2. Generating board.c file with MBA RDT resource.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently config tool generated 'console=/dev/ttySn' in boot cmdline
for logical_partiton scenario, need to strip '/dev/' to avoid kernel
boot issue.
Tracked-On: #4451
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Devices that support SR-IOV can expose their capabilities in
lspci -vv command as below. The offline tool, instead of picking
up the bios exposed memory region(bc000000) for the devices ends
picking up the SR-IOV memory region(00000000c0000000) and generates
VBAR address (in pci_devices.h). This is incorrect. This patch
fixes the offline tool to take the right memory region as the
VBAR address.
Sample lspic -vv log:
67:00.0 Ethernet controller: Intel Corporation Ethernet Connection
X722 for 10GbE backplane (rev 09)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at bc000000 (64-bit, prefetchable) [size=16M]
Region 3: Memory at c1000000 (64-bit, prefetchable) [size=32K]
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
VF offset: 16, stride: 1, Device ID: 37cd
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000c0000000 (64-bit, prefetchable)
Region 3: Memory at 00000000c1020000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Tracked-On: #4443
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch updates existing <$BOARD$>.xml for RDT support.
If the platform supports RDT, the resource and MAX CLOS
value is generated, else the CLOS_INFO is set to empty.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch checks if RDT feature is supported by platform and
updates the CONFIG_RDT_ENABLED flag in the <$BOARD$>.config
file accordingly.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for as generating board.c file
with multiple RDT resources.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
and vm configuration
This patch adds support for,
1. Providing list of max supported CLOS value that is common
between all RDT resource to user when configuring scenario xml.
2. Validate and set the clos value in the vm_configuration file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
value among RDT resources.
This patch identifies the least common supported clos value
from multiple RDT resource. This is done so as to have
consistent capabilities across all resource allocations.
From SDM, "The number of CLOS supported for the MBA feature
may or may not align with other resources such as L3 CAT. In
cases where the RDT features support different numbers of
CLOS the lowest numerical CLOS support the common set of
features, while higher CLOS may support a subset. For instance,
if L3 CAT supports 8 CLOS while MBA supports 4 CLOS, all 8 CLOS
would have L3 CAT masks available for cache control, but the
upper 4 CLOS would not offer MBA support. In this case the upper
4 CLOS would not be subject to any throttling control. Software
can manage supported resources / CLOS in order to either have
1) consistent capabilities across CLOS by using the common subset
or 2) enable more flexibility by selectively applying resource
control where needed based on careful CLOS and thread mapping".
We decided to go with option #1, as it will be more consistent
and less prone to user errorw hen programming the resource mask
MSRs.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for storing multiple RDT resource
and its max supported clos value in the target xml file under
clos subsection.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The slot in launch config would be conflicted when the same bdf is
selected from webUI.
This patch do the below condition to avoid such case:
1. Add the bdf check for pass-through devices.
2. Use the bus:dev:func as passthru device option in launch config.
v1-v2:
1. If BUS of PCI device for passthru is not 0, then alloc a virtual
slot for it.
Tracked-On: #4312
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
KATA VM is not supported on dual-core systems override the
MAX_KATA_VM_NUM to 0.
Tracked-On: #4319
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- python script crashes if the desired 'clos' tag doesn't exist in the
scenario xml file. In the following example, tag '0' doesn't exist:
clos_set: {1: '0', 2: '0'}
referring to tag 0 directly ("vm_info.clos_set[0] == None") causes crash.
To fix it, this patch uses "if i in vm_info.clos_set:" where 'i' is the
VM id and serves as the tag in the clos_set dictionary, to sanity
check the dictionary.
- if the hardware doesn't support CAT, don't need to generate clos entry
in the vm_config[], which could be confusing.
- to reduce redundant code, wrap the clos generation code as a function.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently, config tool will maintain a whitelist for the board which
need to hide some pci devices. For the board out of whitelist, we set
MAX_HIDE_PDEVS_NUM to 0.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
/proc/cpuinfo represents online CPUs only, and the number of CPUs is
limited by the 'maxcpus' option.
/sys/devices/system/cpu/possible is a better option for our purpose
since it represents the possible CPUs that can ever be available in the
system, including the offline CPUs. And it's not limited by 'maxcpus'.
Though the Linux command line parameter nr_cpus and possible_cpus still
have impact on /sys/devices/system/cpu/possible.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Split the input message for 'virtio-net' would discard extra
message from user input, this is not expected for 'virtio-net' setting.
Tracked-On: #4298
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse and get 'cpu_sharing' item value
from launch config files, these values are editable by user.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missed definition of 'logger_setting' into launch script.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous launch config tool doesn't handle the situation that
'virtio-blk' is set with rootfs partition with rootfs image,
in such scenario, VM would be failed to start when launching
This patch refine the mount device while use rootfs partiton and image
from vritio block device.
Tracked-On: #4248
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UOS would be failed to get ip address, add 'tap_' perfix for virtio-net
name setting.
Tracked-On: #4255
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add this check while validating audio/audio_codec for pass-through
device setting.
Tracked-On: #4249
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'vuart1' item is selectable from webUI, but in some case user
might select vuart1 in industry scenario by mistake. If config tool
set them in vm configurations directly without checking, the
hypervisor might be failed to boot.
This patch will check such case and set the correct vuart1 in vm
configurations.
Tracked-On: #4247
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
scenario_cfg_lib.py:
- removed extra white space before ','
pci_dev_c.py:
- follow style in other files, added two empty lines
- removed extra line at the end of the .c file
vm_configurations_c.py
- alignment
vm_configurations_h.py
- alignment
Tracked-On: #3602
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Hv could be failed when hv ram start address when around 16, beacause when
booting from grub mode, hv and sos ram address would be overlaped.
This patch set the HV_RAM_START address above 256M for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missing 'ramdisk_mod' item tag of industry config xml for tgl-rvp.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Set the DRHDx_IGNORE to false even there is no DEV_SCOPE under this
DRHD.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Shuang Zheng