OrgACRN
/
acrn-hypervisor
mirror of https://github.com/projectacrn/acrn-hypervisor.git
1
0
Fork 0
Code Issues Releases Wiki Activity

acrn-config: add hybrid_rt_fusa scenario for fusa related passthru test 

Add a new scenario xml file for EHL which is derived from hybrid_rt for
validation of certain passthru devices in prelaunched RTVM. Because the
configuration requires to disable GPIO support for SOS VM, it should
not be merged into the standard hybrid_rt scenario. According to this
change, remove the SCI passthru setting from existing hybrid_rt since
from now on hybrid_rt_fusa should be used for SCI passthru test.

Tracked-On: #5278

Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This commit is contained in:
Toshiki Nishioka 2020-09-04 16:21:04 +09:00 committed by wenlingz
parent 0267cc4ef1
commit cdd01db4e7
2 changed files with 199 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt.xml
View File

@ -113,7 +113,6 @@
</vuart>
<pci_devs desc="pci devices list">
<pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 4b63</pci_dev>
<pci_dev desc="pci device">00:1a.3 Non-VGA unclassified device [0000]: Intel Corporation Device 4b4a</pci_dev>
</pci_devs>
</vm>
<vm id="1">

199
misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt_fusa.xml Normal file
View File

@ -0,0 +1,199 @@
<?xml version='1.0' encoding='utf-8'?>
<acrn-config board="ehl-crb-b" scenario="hybrid_rt_fusa">
<hv>
<DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
<RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
<SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
<MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
<NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
<CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
<LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
<LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
</DEBUG_OPTIONS>
<FEATURES>
<RELOC desc="Enable hypervisor relocation">y</RELOC>
<SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_BVT</SCHEDULER>
<MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
<RDT desc="Intel RDT (Resource Director Technology).">
<RDT_ENABLED desc="Enable RDT">n</RDT_ENABLED>
<CDP_ENABLED desc="CDP (Code and Data Prioritization). CDP is an extension of CAT.">n</CDP_ENABLED>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
<CLOS_MASK desc="Cache Capacity Bitmask">0xfff</CLOS_MASK>
</RDT>
<HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
<IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
<ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
<L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
<MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
<IVSHMEM desc="IVSHMEM configuration">
<IVSHMEM_ENABLED desc="Enable Share Memory between VMs by IVSHMEM.">n</IVSHMEM_ENABLED>
<IVSHMEM_REGION desc="the name, size, colon separated IDs of communication VMs of share memory region, separated by comma like this: hv:/shm_region_0, 0x200000, 0:2"></IVSHMEM_REGION>
</IVSHMEM>
</FEATURES>
<MEMORY>
<STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
<HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor" />
<HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor." />
<LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
<UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
<SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
<PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
</MEMORY>
<CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
<IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
<MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
<MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
<MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
<MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
<MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">256</MAX_PT_IRQ_ENTRIES>
<MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device. Please leave it blank if not sure.">64</MAX_MSIX_TABLE_NUM>
<MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
</CAPACITIES>
<MISC_CFG>
<GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
<UEFI_OS_LOADER_NAME desc="UEFI OS loader name."></UEFI_OS_LOADER_NAME>
</MISC_CFG>
</hv>
<vm id="0">
<vm_type desc="Specify the VM type" readonly="true">PRE_RT_VM</vm_type>
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
<guest_flag>GUEST_FLAG_RT</guest_flag>
</guest_flags>
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
<pcpu_id>2</pcpu_id>
<pcpu_id>3</pcpu_id>
</cpu_affinity>
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>0</vcpu_clos>
</clos>
<epc_section configurable="0" desc="epc section">
<base desc="SGX EPC section base, must be page aligned">0</base>
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
</epc_section>
<memory>
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
<size desc="The memory size in Bytes for the VM">0xC0000000</size>
<start_hpa2 configurable="0" desc="Start of second HPA for non-contiguous allocations in host for the VM">0x0</start_hpa2>
<size_hpa2 configurable="0" desc="Memory size of second HPA for non-contiguous allocations in Bytes for the VM">0x0</size_hpa2>
</memory>
<os_config>
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">PREEMPT-RT</name>
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">RT_bzImage</kern_mod>
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline." />
<bootargs desc="Specify kernel boot arguments">rw rootwait root=/dev/sda2 console=ttyS0 noxsave nohpet no_timer_check ignore_loglevel consoleblank=0 tsc=reliable</bootargs>
</os_config>
<vuart id="0">
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
</vuart>
<vuart id="1">
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
</vuart>
<pci_devs desc="pci devices list">
<pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 4b63</pci_dev>
<pci_dev desc="pci device">00:1a.3 Non-VGA unclassified device [0000]: Intel Corporation Device 4b4a</pci_dev>
</pci_devs>
<mmio_resources desc="MMIO resources.">
<p2sb>true</p2sb>
</mmio_resources>
<pt_intx desc="pt intx mapping.">
(14, 0)
</pt_intx>
</vm>
<vm id="1">
<vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
<guest_flag>0</guest_flag>
</guest_flags>
<cpu_affinity desc="List of pCPU that this VM's vCPUs are pinned to.">
<pcpu_id>0</pcpu_id>
<pcpu_id>1</pcpu_id>
</cpu_affinity>
<clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>0</vcpu_clos>
</clos>
<memory>
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
</memory>
<os_config>
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
<ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline." />
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
</os_config>
<vuart id="0">
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
</vuart>
<vuart id="1">
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
</vuart>
<pci_devs configurable="0" desc="pci devices list">
<pci_dev desc="pci device" />
</pci_devs>
<board_private>
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p2</rootfs>
<bootargs desc="Specify kernel boot arguments">
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
i915.nuclear_pageflip=1 swiotlb=131072 modprobe.blacklist=pinctrl_elkhartlake,intel_ehl_gpio
</bootargs>
</board_private>
</vm>
<vm id="2">
<vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
<guest_flag>0</guest_flag>
</guest_flags>
<cpu_affinity desc="List of pCPU: the guest VM is allowed to create vCPU from all or a subset of this list.">
<pcpu_id>1</pcpu_id>
</cpu_affinity>
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>0</vcpu_clos>
</clos>
<epc_section configurable="0" desc="epc section">
<base desc="SGX EPC section base, must be page aligned">0</base>
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
</epc_section>
<vuart id="0">
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
</vuart>
<vuart id="1">
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
</vuart>
</vm>
</acrn-config>