Instead of changing directories with "cd" command use the
-C parameter to change directory.
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
allocated all pcpus to vm0 to handle possible AP wakeup flow for all cpus,
as we pass org ACPI table to VM0 - that means VM0 can see all CPUs.
SOS(VM0) start expected CPUs through "maxcpus=" kernel cmdline option.
During first hypercall from SOS, calling vm_fixup to free un-expect-enabled
vcpus from VM0.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove sipi_from_efi_boot_service_exit & efi_deferred_wakeup_pcpu workaround
for uefi boot flow
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
wakeup AP need INIT-SIPI-SIPI sequence in old time, now we only need
INIT-SIPI.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the target is an array, then only the first element
will be copied.
So replace structure assignment with memcpy_s().
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current only 8 vioapic pins for pci irq (total 24 with 16 reserved),
which easily leads virtual GSI sharing with more and more passthrough
devices. This patch doulbes vioapic pin count and adds reboot hooks to
allocate from same pin after each reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Remove 'license_header' files that were located in hypervisor/ and
devicemodel/ and used by the respective Makefiles to build the
'include/version.h' header file.
Both Makefiles were adjusted to use the top-level LICENSE file
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Move all mem operations functions into a single
source code file, instead of the various source
code files that just implement a single or few
funtion.
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move all string operations functions into a single
source code file, instead of the various source
code files that just implement a single or few
function.
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Entries of pci_businfo[] allocated in function "pci_parse_slot"
using calloc need to be freed when deinit.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
- device driver should register valid i/o handlers
in any cases, avoid referencing to default handler
- remove i/o handler test code as they shall
never be NULL.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Seed an initial CODEOWNERS file. Update as owners for specific areas
are defined.
You can use a CODEOWNERS file to define individuals or teams that are
responsible for code in a repository. The listed names must have write
permissions for the repository.
Code owners are automatically requested for review when someone opens a
pull request that modifies code that they own. When someone with admin
or owner permissions has enabled required reviews, they also can
optionally require approval from a code owner before the author can
merge a pull request in the repository.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix NULL pointer dereference if 'localtime()' execution encountered an error,
in create_trace_file_dir().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fixed two issues: 1) potential uninitiliazed usage of 'len' in
hvlog_read_dev(); 2) NULL dereference of 'last' if 'calloc' failure.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it can be used as following:
make ==> to make hypervisor & devicemodel & tools
also modify tools makefile to support out-dir setting.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
Now the -O0 option is used. In such case the code is not optimized.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the optimization option is enabled, it is possible that one variable is
not initialized before using in the get_vioapic_info. (In fact the warning is
bogus)
This is only to reduce the compiling warning.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
FPU/SSE is not supported in HV. Otherwise it is possible that the
SSE/FPU register is used under -O2 option.
So the gcc option is added to disable them.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now two flags can be used to control the optimizatin option. So unify them
and only one flag can be used to config the optimization
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now one uint64_t type is used to obtain the corresponding descriptor_table
for GDT/IDT. This will cause the stack protect corruption under -O2.
So the descriptor_table struct is added to configure the GDT/IDT of VMCS.
V1->V2: Move the descriptor_table into vmx.h header file
And its type is renamed from dt_addr_t to descriptor_table.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The RFLAGS will be touched in some inline assembly.(exec_vmxon/
RFLAGS_RESTORE). The "cc" constraint should be added. Otherwise
it won't be handled under -O2 option.
And "%%XXX" register should also be added into constraints.
Otherwise it will be optimized incorrectly.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vlapic_create_timer/vlapic_reset_timer to setup/reset a timer.
Add vlapic_update_lvtt to disarm timer when mode changes.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using __func__ instead of function string name.
Using tab instead of more whitespace.
Using macro instead of numeric constants.
Remove unnecessary function declaration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
These code is useless since it just pseudocode. Current it doesn't
support vlapic one-shot/periodic timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
make the timer list be ordered to speed up expried timer
process and next timer event finding.
Add timer would not schedule timer unless it's the next
timer event.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the "Contributing Guidelines" document to point at the
top-level LICENSE file that was created after the merger of
the three acrn-{hypervisor,devicemodel,documentation} repositories
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The tools directory is moved out of ./devicemodle, to be in parallel with
hypervisor, devicemodel and doc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Post-merge, the doc building instructions need an update to reflect the
new diretory structure.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Documentation updates were needed to account for changes caused by the
recent merging of the three acrn-hypervisor, acrn-devicemodel, and
acrn-documentation repos.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
V2->V3: Updated variable name: trampoline_code_paddr
V1->V2: changed variable name: init_ap_code_addr
These page tablea are sitting right after the trampoline code, so adjust it according to
the actual loaded address for trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V3->V4: Updated function/variable names for accurancy
V2->V3: Changed a few function/variable names to make it less confusing
V1->V2: removed the unneccesary cache flushing
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- For other boot, scan E820 to allocate memory in HV run time
- update_trampoline_code_refs() updates all the references that need the
absolute PA with the actual load address
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V1->V2: removed CONFIG_LOW_RAM_START and added ".org 0" to
cpu_secondary.S
The assumption is trampoline code is relocated while HV is not, so:
trampoline code is built at address 0, and CS register is updated
by SIPI to reflect the correct vector
in real mode part, added extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
The current dm, all non-pci and non-acpi related files are put into
hw/platform directory. This is actually disturbed the meaning of
*platform*. The platform devices are mean of board and SoC specific
non-PCI devices, like usb devices, etc.
This patch refines the ACRN dm directory architecture.
For some common device logic files, likes block_if.c/uart_core.c or
usb_core.c. They will move to hw/ directly.
For platform architecture depended files, create arch/ under root dir.
And create sub-dir arch/x86 for x86 architecture, will create more
architectures in future. The pm.c will move to this new dir.
The hw/acpi will be moved to hw/platform/acpi due to acpi also be
considered as part of platform.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Currently config_page_table_attr() treats MMU_MEM_ATTR_READ exactly as
MMU_MEM_ATTR_BIT_READ_WRITE for PTT_HOST, so even when MMU_MEM_ATTR_WRITE
is not used, the R/W bit in PTE is still being set
Signed-off-by: Zide Chen <zide.chen@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Miguel Bernal Marin