Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In VT-d scenario, if MSI interrupt has been enabled,
vCPU writes the content in MSI registers,
and all bits of the content are read-only.
In this case, hypervisor code will call
enable_disable_msi(vdev, false), which will disable MSI.
And there's no chance to call remap_vmsi.
This is wrong behavior, which will result in the disable of MSI.
Tracked-On: #5847
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Signed-off-by: liujunming <junming.liu@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
A new x86/guest/virq.h head file now contains all guest
related interrupt handling API.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
ivshmem spec says that the size of BAR0 is 256 bytes. Windows
ivshmem driver will check the size of BAR0. It will refuse to
load the ivshmem driver if BAR0 size is not 256.
For post-launched VM hv land ivshmem BARs are allocated by
device model. For pre-launched VM hv land ivshmem BARs are
allocated by acrn-config tool. Both device model and acrn-config
tool should make sure that the BAR base addr are aligned to 4K
at least.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch denies Service VM the access permission to device resources
owned by hypervisor.
HV may own these devices: (1) debug uart pci device for debug version
(2) type 1 pci device if have pre-launched VMs.
Current implementation exposes the mmio/pio resource of HV owned devices
to SOS, should remove them from SOS.
Tracked-On: #5615
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The commit 'Fix: HV: VM OS failed to assign new address to pci-vuart
BARs' need more reshuffle.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
When wrong BAR address is set for pci-vuart, OS may assign a
new BAR address to it. Pci-vuart BAR can't be reprogrammed,
for its wrong fixed value. That can may because pci_vbar.fixed and
pci_vbar.type has overlap in abstraction, pci_vbar.fixed
has a confusing name, pci_vbar.type has PCIBAR_MEM64HI which is not
really a type of pci BARs.
So replace pci_vbar.type with pci_vbar.is_mem64hi, and change
pci_vbar.fixed to an union type with new name pci_vbar.bar_type.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
While following two styles are both correct, the 2nd one is simpler.
bool is_level_triggered;
1. if (is_level_triggered == true) {...}
2. if (is_level_triggered) {...}
This patch cleans up the style in hypervisor.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Memory BAR of ivshmem device is 64-bit, 2 BAR registers
are used, counting in one 32-bit MMIO bar and and one
32-bit vMSIX table bar, number of bars "nr_bars" shall
be 4 instead of 3.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- fix bug in 'hcall_destroy_vdev()', the availability of
vpci device shall be checked on 'target_vm".
- refine 'vpci_update_one_vbar()' to avoid potential NULL
pointer access.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Rename hv_access_memory_region_update to ppt_clear_user_bit to
verb + object style.
Tracked-On: #5330
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cleanup vpci structure when shutdown_vm to avoid use uninitialized data
after reboot.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cteate method for vmcs9900 vdev in hypercalls.
The destroy method of ivshmem is also suitable for other emulated vdev,
move it into hcall_destroy_vdev() for all emulated vdevs
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
if vuart type is pci-vuart, then use MSI interrupt
split vuart_toggle_intr() control flow into vuart_trigger_level_intr() &
trigger_vmcs9900_msix(), because MSI is edge triggered, no deassertion
operation. Only trigger MSI for pci-vuart when assert interrupt.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
support pci-vuart type, and refine:
1.Rename init_vuart() to init_legacy_vuarts(), only init PIO type.
2.Rename deinit_vuart() to deinit_legacy_vuarts(), only deinit PIO type.
3.Move io handler code out of setup_vuart(), into init_legacy_vuarts()
4.add init_pci_vuart(), deinit_pci_vuart, for one pci vuart vdev.
and some change from requirement:
1.Increase MAX_VUART_NUM_PER_VM to 8.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The vuart_read()/vuart_write() are coupled with PIO vuart type. Move
the non-type related code into vuart_read_reg()/vuart_write_reg(), so
that we can re-use them to handle MMIO request of pci-vuart type.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In pre-launched VM the GPA of vmsix BAR which is used for vmsix
over msi is calculated/allocated by acrn-config tool. The GPA
needs to be assigned to vdev when vdev is initialized. The
assignment is only needed for pre-launched VM. For SOS kernel
will reprogram the Bar base when startup. For post-launched VM
the Bar GPA will be assigned by device model via hypercall.
Tracked-On: #5316
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When init_vmsix_on_msi is called during the initialization of a pt
device, the vmsix bar used for vmsix over msi is just created. No
mapping/unmapping is done and pci_vdev_write_vbar should be called
instead of vdev_pt_write_vbar at the time. Currently the Bar mapping
is delayed till OS sizing the Bar. Backup vbar base_gpa to mmio_gpa
is not required here becuase it will be done later when Bar mapping.
Tracked-On: #5316
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch enables doorbell feature for hv-land
ivshmem device to support interrupt notification
between VMs that use inter-VM(ivshmem) devices.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- write_vmsix_cap_reg(): emulates vmsix cap writes.
write_pt_vmsix_cap_reg(): emulates msix cap write
for PT devices.
- rw_vmsix_table(): emulates vmsix table bar space access.
- vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access only.
- pt_vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access and remap msi entry for PT device if
write operation is executed.
- rename 'init_vmsix()' and 'deinit_vmsix()' to
'init_vmsix_pt()' and 'deinit_vmsix_pt()' respectively,
they're for PT devices only.
- remove below 2 functions,call
'pci_vdev_read_vcfg()' directly in cases they're used.
- 'read_vmsi_cap_reg()'
- 'read_vmsix_cap_reg()'
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Done <eddie.dong@intel.com>
vmsix.c originally covers ptdev case but ACRN hypervisor
need to support pure virtual PCI mediator, such as ivshmem
device in this patch set.
For better understanding the code changes from patch
perspective, split the changes to several small patches.
This patch moves most original vmsix code to pci_pt.c
as they're mixed with ptdev specific operations.
The subsequent patches will start the detail abstraction change.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is a bug fix that avoids multiple declarations of mem_regions
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: vpci: Add 0x45, which is the high-byte of device id of EHL,
to the enumeration array in vhostbridge.c. This is to fix the
problem that PCIe extended capabilities like SR-IOV cannot be
used on EHL.
Tracked-On: #5256
Signed-off-by: Qian Wang <qian1.wang@intel.com>
When HV pass through the P2SB MMIO device to pre-launched VM, vgpio
device model traps MMIO access to the GPIO registers within P2SB so
that it can expose virtual IOAPIC pins to the VM in accordance with
the programmed mappings between gsi and vgsi.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Kernel driver and ACPI ASL may access a platform hidden device
thru PIO, e.g., Intel ICH LPC driver. If the access is originated
in SOS or Pre-launched OS, vpci_pio_cfgdata_write/read should support
it.
This commit also reworks vpci_write_cfg/vpci_read_cfg to do the access
check and elimiates the access from post-launched VM (that should be
handled by DM).
Tracked-On: #5257
Signed-off-by: Stanley Chang <stanley.chang@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if device configuration vbdf is unassigned, then the corresponding
vdev will not be initialized, instead, the vdev will be initialized
by device model through hypercall.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For ivshmem vdev creation, the vdev vBDF, vBARs, shared memory region
name and size are set by device model. The shared memory name and size
must be same as the corresponding device configuration which is configured
by offline tool.
v3: add a comment to the vbar_base member of the acrn_vm_pci_dev_config
structure that vbar_base is power-on default value
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pr_fatal with pr_info to reduce printing logs
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Ivshmem device defines four registers including Interrupt Mask, Interrupt
Status, IVPostion and Doorbell. The first two are useless and no emulation
is required. The latter two are used for interrupts and will be implemented
in the future.
This patch also introduces a new priv_data member for structure pci_vdev,
it can be used to find an ivshmem device through pci_vdev.
v2: refine code style
v3: 1) add @pre for ivshmem_mmio_handler function
2) refine code style
v4: 1) set ivshmem registers default value when vBAR mapping
2) change find_ivshmem_device to set_ivshmem_device
v5: 1) change set_ivshmem_device to find_and_set_ivshmem_device
2) add a ASSERT to check if the vdev->priv_data is set successfully
v6: change find_and_set_ivshmem_device to create_ivshmem_device
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implement read_vdev_cfg/write_vdev_cfg operations for ivshmem deivce
v2: read_vdev_cfg/write_vdev_cfg always return zero, the ivshmem device
only emulated in HV.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vpci_update_one_vbar API to simplify
vBAR mapping/unmapping when vBAR writing.
v2: refine commit message
v4: refine commit message
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ivshmem device supports two BARs, BAR 0 is used for inter-VM
notification mechanism, BAR 2 is used to provide shared memory
base address and size.
v4: check if the return value of get_shm_region function is NULL
v5: 1) change get_shm_region to find_shm_region
2) add print log when ivshmem device doesn't find memory region
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Ivshmem device is used for shared memory based communication between
pre-launched/post-launched VMs.
this patch implements ivshmem device configuration space initialization
and ivshmem device operation methods.
v2: introduce init_one_pcibar interface to simplify BAR initialization
operation of HV emulated PCI device.
v3: 1) due to init_one_pcibar API is only used for pre-launched VM vdevs
it can't be applied to all vdevs, so remove it.
2) move ivshmem BARs initialization to subsequent patch, this patch
only introduce ivshmem configuration space initialization.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ivshmem memory regions use the memory of the hypervisor and
they are continuous and page aligned.
this patch is used to initialize each memory region hpa.
v2: 1) if CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED is not defined, the
entire code of ivshmem will not be compiled.
2) change ivshmem shared memory unit from byte to page to avoid
misconfiguration.
3) add ivshmem configuration and vm configuration references
v3: 1) change CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED to CONFIG_IVSHMEM_ENABLED
2) remove the ivshmem configuration sample, offline tool provides default
ivshmem configuration.
3) refine code style.
v4: 1) make ivshmem_base 2M aligned.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- move vm_state_lock to other place in vm structure
to avoid the memory waste because of the page-aligned.
-- remove the memset from create_vm
-- explicitly set max_emul_mmio_regions and vcpuid_entry_nr to 0
inside create_vm to avoid use without initialization.
-- rename max_emul_mmio_regions to nr_emul_mmio_regions
v1->v2:
add deinit_emul_io in shutdown_vm
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In MSI Capability Structure, bit 7 (64 bit address capable) of MSICTRL
is RO;
Tracked-On: #5125
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When VM read pre-sriov header in ECAP of ptdev, only emulate the
reading if SRIOV is hidden.
Write to pre-sriov header is ignored so no need to fix writting.
Tracked-On: #5085
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
hv: vpci: inject physical PCIEXBAR to SOS vhostbridge in
order to fully emulate a full host bridge following HW spec
The vhostbridge we emulate currently is a "Celeron N3350/
Pentium N4200/Atom E3900 Series Host Bridge", which is of
Appollo Lake SoC, but the emulation is incomplete, and
we need to implement a full vhostbridge following HW spec.
This is a step-by-step process, and in this patch we fixes
the simulation of PCIEXBAR register (0x60) and thus solved
bug #6464.
-------#6464: SOS cannot make use of ECAM---------------
Generally, SOS will check the MMIO Base Addr in ACPI MCFG
table to confirm it is a reserved memory area. There will
be 3 methods to check:
1. Via E820 table
2. Via EFI runtime service
3. To check with the value in PCIEXBAR(0x60) of hostbridge
For SOS, method 2 is not feasible since no EFI runtime service
is available for SOS. And on newer platform like EHL/TGL, its
BIOS somehow doesn't reserve it in native E820, thus SOS will
try use method 3 to verify, so we should inject physical ECAM
to vhostbridge, otherwise all 3 methods will fail, and SOS will
not make use of ECAM, which will results in that SOS cannot use
PCIe Extended Capabilities like SR-IOV.
-------------------------------------------------------
TODO:
1. In the future, we may add one or more virtual hostbridges for CPUs that are incompatible in layout with the current one, according to HW specs
2. Besides PCIEXBAR(0x60), there are also some registers needs to be emulated more precisely rather than be treated as read-only and hard-coded, will be fixed in future patches.
Tracked-On: #5056
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: vpci: refine init_vhostbridge to be dword-aligned
Refine the hard-coded non-dword-aligned sentences in init_vhostbridge
to be dword-aligned to simplify the initialization operation
Tracked-On: #5056
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Li Fei1