Add following to default output scenarios vm_configurations.c:
- pci_dev_num
- pci_devs = sos_pci_devs
Both was defineded in CONFIG_SOS_VM.
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
update vm configurations for hybrid_rt scenario on WHL/EHL/TGL/CFL
boards, add 1 YaaG and assign 1 more pcpu for WaaG.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
P2SB_BAR_ADDR related macros should only be defined in misc_cfg.h only when
p2sb is enabled in scenario xml.
Tracked-On: #5340
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Add configurations code of industry scenario and hybrid_rt scenario for
cfl-k700-i7 board to support build acrn binary from source code directly.
Tracked-On: #5212
Signed-off-by: Victor Sun <victor.sun@intel.com>
move MACRO of IVSHMEM region name to ivshmem_cfg.h and bug fix that
avoids multiple declarations of mem_regions in ivshmem_cfg.h
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This is a bug fix that avoids multiple declarations of mem_regions
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
increase the length of DSDT table to avoid memory overwrited by
subsequent ACPI tables.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
generate ASL code of ACPI tables for pre-launched VMs on nuc7i7dnb,
whl-ipc-i5, whl-ipc-i7, ehl-crb-b boards
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
update the size of ivshmem memory region to [2MB, 512MB].
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
After below commit in https://github.com/zephyrproject-rtos/zephyr
commit d0126a037d23484feebba00d2c0eac27e6393fef
Author: Zide Chen <zide.chen@intel.com>
Date: Wed Feb 5 08:32:00 2020 -0800
boards/x86/acrn: build it in x86_64 mode and switch to X2APIC
The zephyr image for acrn would be built in x86_64 mode by default, then the
load/entry address for pre-launched Zephyr image should be changed from
0x100000 to 0x8000 accordingly per below definition in zephyr .ld file:
zephyrproject_src/zephyr/include/arch/x86/intel64/linker.ld
SECTIONS
{
/*
* The "locore" must be in the 64K of RAM, so that 16-bit code (with
* segment registers == 0x0000) and 32/64-bit code agree on addresses.
* ... there is no 16-bit code yet, but there will be when we add SMP.
*/
.locore 0x8000 : ALIGN(16)
{
_locore_start = .;
The commit in zephyrproject is merged before zephyr v2.2 release, so from v2.2
on, HV need this fix to boot Zephyr as pre-launched VM.
Tracked-On: #5259
Signed-off-by: Victor Sun <victor.sun@intel.com>
This patch is to support direct assignment of P2SB bridge to one pre-launched
VM for EHL. User can configure this per-VM attribute in scenario xml:
<mmio_resources desc="MMIO resources.">
<p2sb>y</p2sb>
</mmio_resources>
Set p2sb to y to passthru P2SB bridge to VM, and n otherwise.
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
1.Modify clos_mask and mba_delay as a member of the union type.
2.Move HV_SUPPORTED_MAX_CLOS ,MAX_CACHE_CLOS_NUM_ENTRIES and
MAX_MBA_CLOS_NUM_ENTRIES to misc_cfg.h file.
Tracked-On: #5229
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
add an IVSHMEM regoin and the related configuration parameters in
hybrid_rt scenario on whl-ipc-i5. The size of the shared memory is
2M, and it is used for the communication between VM0 and VM2.
v6: rename shm name; remove unnecessary MACROs.
v7: rename MACRO for shm name; add unassigned vbdf for post-launched
VMs.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a comment for SOS_VM to indicate its VM ID for better understanding;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the CPU affinity of SOS VM is initialized at runtime during
sanitize_vm_config() stage, follow the policy that all physical CPUs
except ocuppied by Pre-launched VMs are all belong to SOS_VM. Now change
the process that SOS CPU affinity should be initialized at build time
and has the assumption that its validity is guarenteed before runtime.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Set guest flag value for logical partition.
Tracked-On: #5119
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add hybrid_rt source code for whl-ipc-i5/i7.
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add acrn-config tool formated nuc7i7dnb configurations code in misc/vm_configs/
folder with new layout;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are 3 kinds of configurations in ACRN hypervisor source code: hypervisor
overall setting, per-board setting and scenario specific per-VM setting.
Currently Kconfig act as hypervisor overall setting and its souce is located at
"hypervisor/arch/x86/configs/$(BOARD).config"; Per-board configs are located at
"hypervisor/arch/x86/configs/$(BOARD)" folder; scenario specific per-VM configs
are located at "hypervisor/scenarios/$(SCENARIO)" folder.
This layout brings issues that board configs and VM configs are coupled tightly.
The board specific Kconfig file and misc_cfg.h are shared by all scenarios, and
scenario specific pci_dev.c is shared by all boards. So the user have no way to
build hypervisor binary for different scenario on different board with one
source code repo.
The patch will setup a new VM configurations layout as below:
misc/vm_configs
├── boards --> folder of supported boards
│ ├── <board_1> --> scenario-irrelevant board configs
│ │ ├── board.c --> C file of board configs
│ │ ├── board_info.h --> H file of board info
│ │ ├── pci_devices.h --> pBDF of PCI devices
│ │ └── platform_acpi_info.h --> native ACPI info
│ ├── <board_2>
│ ├── <board_3>
│ └── <board...>
└── scenarios --> folder of supported scenarios
├── <scenario_1> --> scenario specific VM configs
│ ├── <board_1> --> board specific VM configs for <scenario_1>
│ │ ├── <board_1>.config --> Kconfig for specific scenario on specific board
│ │ ├── misc_cfg.h --> H file of board specific VM configs
│ │ ├── pci_dev.c --> board specific VM pci devices list
│ │ └── vbar_base.h --> vBAR base info of VM PT pci devices
│ ├── <board_2>
│ ├── <board_3>
│ ├── <board...>
│ ├── vm_configurations.c --> C file of scenario specific VM configs
│ └── vm_configurations.h --> H file of scenario specific VM configs
├── <scenario_2>
├── <scenario_3>
└── <scenario...>
The new layout would decouple board configs and VM configs completely:
The boards folder stores kinds of supported boards info, each board folder
stores scenario-irrelevant board configs only, which could be totally got from
a physical platform and works for all scenarios;
The scenarios folder stores VM configs of kinds of working scenario. In each
scenario folder, besides the generic scenario specific VM configs, the board
specific VM configs would be put in a embedded board folder.
In new layout, all configs files will be removed out of hypervisor folder and
moved to a separate folder. This would make hypervisor LoC calculation more
precisely with below fomula:
typical LoC = Loc(hypervisor) + Loc(one vm_configs)
which
Loc(one vm_configs) = Loc(misc/vm_configs/boards/<board>)
+ LoC(misc/vm_configs/scenarios/<scenario>/<board>)
+ Loc(misc/vm_configs/scenarios/<scenario>/vm_configurations.c
+ Loc(misc/vm_configs/scenarios/<scenario>/vm_configurations.h
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Yang, Yu-chu