Sphinx generates a full-site index (headings, terms, function names,
etc.) but we haven't been linking to it. This is a tricky way to get
the site index added to the left nav that appears to work, by creating a
genindex.rst that we can link to in the site toctree so it shows up in
the leftnav, but the generated genindex.html for the dummy genindex.rst
will be overwritten by the sphinx created genindex.html with the
full-site index.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
qemu xml has no devices list. Tool will receive the empty devices
list while parsing the "platform" xml. Remove the error of resolved
nested mmio address window that the input couldn't be None. Simply
return an None list.
Tracked-On:#5454
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
remove PSRAM_PASSTHROUGH_PRE_RTVM config which is not used in
PSRAM config and disable psram config.
Tracked-On: #5418
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Currently, ACRN only support shutdown when triple fault happens, because ACRN
doesn't present/emulate a virtual HW, i.e. port IO, to support shutdown. This
patch emulate a virtual shutdown component, and the vACPI method for guest OS
to use.
Pre-launched VM uses ACPI reduced HW mode, intercept the virtual sleep control/status
registers for pre-launched VMs shutdown
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Like post-launched VMs, for pre-launched VMs, the ACPI reset register
is also fixed at 0xcf9 and the reset value is 0xE, so pre-launched VMs
now also use ACPI reset register for rebooting.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Add the 'reboot=acpi' kernel boot argument for pre-launched VMs
Add the code to sanity check if 'reboot=acpi' is specified in the
scenario files
If hardware reduced ACPI is detected, by default, Linux will set the reboot type to
use EFI for rebooting. "reboot=acpi" sets the reboot type to use ACPI for rebooting.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Change ACPI version from V3 to V5 to support hardware-reduced ACPI, which
is a V5 feature
Remove/obsolete the PM1X related stuff as they are not used for hardware-reduced
ACPI
Add the _S5 method in DSDT table
Using hardware-reduced mode allows to use a much simpler form of ACPI that
does not require supporting the legacy of previous versions of the specification
such as SCI IRQ.
Hardware-reduced mode is specified by setting the Hardware Reduced (HW_REDUCED_ACPI)
flag in FADT table.
If the HW_REDUCED_ACPI flag in the FADT table is set, OSPM will ignore fields related
to the ACPI HW register interface such as the PM1x control register. Instead, sleep
control/status registers can be used for system sleep state entry on hardware-reduced
ACPI systems.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
So that guest VM can recognize and use ACPI reset register to reboot
No need to specify "Flags (decoded below)" in FADT template, iasl will
calculate and fill in this flag for us
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
A VM may transition to VM_PAUSED state while its console is being used.
Jump back to the HV shell if this happens so the console does not appear
stuck.
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
More than one VM may request shutdown on the same pCPU before
shutdown_vm_from_idle() is called in the idle thread when pCPUs are
shared among VMs.
Use a per-pCPU bitmap to store all the VMIDs requesting shutdown.
v1 -> v2:
- use vm_lock to avoid a race on shutdown
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Feedback suggests we add more top-level navigation to the getting
started guides, so let's include a local TOC as well as using the
"numbered-step" style to top-level steps.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some ACRN docs (in particular the HLD) has content nested more than the
4 levels shown in the sidebar navigation. So when looking at those
documents, it's hard to get to next chapter. Bring back the
previous/next links to fix this situation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add two Kconfig pSRAM config:
one for whether to enable the pSRAM on the platfrom or not;
another for if the pSRAM is enabled on the platform whether to enable
the pSRAM in the pre-launched RTVM.
If we enable the pSRAM on the platform, we should remove the pSRAM EPT
mapping from the SOS to prevent it could flush the pSRAM cache.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
1.Modified the virtual e820 table for pre-launched VM. We added a
segment for pSRAM, and thus lowmem RAM is split into two parts.
Logics are added to deal with the split.
2.Added EPT mapping of pSRAM segment for pre-launched RTVM if it
uses pSRAM.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dm: pSRAM: added a command line parameter "--psram" to enable pSRAM
support for post-launched RTVM
Added "--psram" in DM command line to enable pSRAM support for
post-launched RTVM
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
pSRAM memory should be cachable. However, it's not a RAM or a normal MMIO,
so we can't use the an exist API to do the EPT mapping and set the EPT cache
attribute to WB for it. Now we assume that SOS must assign the PSRAM area as
a whole and as a separate memory region whose base address is PSRAM_BASE_HPA.
If the hpa of the EPT mapping region is equal to PSRAM_BASE_HPA, we think this
EPT mapping is for pSRAM, we change the EPT mapping cache attribute to WB.
And fix a minor bug when SOS trap out to emulate wbinvd when pSRAM is enabled.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dm: modify vE820 to adapt to pSRAM for post-launched RTVM
When pSRAM is enabled for post-launched RTVM, we add a segment in vE820 for
pSRAM, and therefore the lowmem RAM will be split into part1 and part2.
Also, code of post vE820 initialization is refined
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use ept_flush_leaf_page to emulate guest WBINVD when PTCM is enabled and skip
the pSRAM in ept_flush_leaf_page.
TODO: do we need to emulate WBINVD in HV side.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename hv_access_memory_region_update to ppt_clear_user_bit to
verb + object style.
Tracked-On: #5330
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Temporarily remove NX bit of PTCM binary in pagetable during pSRAM
initialization:
1.added a function ppt_set_nx_bit to temporarily remove/restore the NX bit of
a given area in pagetable.
2.Temporarily remove NX bit of PTCM binary during pSRAM initialization to make
PTCM codes executable.
3. TODO: We may use SMP call to flush TLB and do pSRAM initilization on APs.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The added parse_ptct function will parse native ACPI PTCT table to
acquire information like pSRAM location/size/level and PTCM location,
and save them.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
1.We added a function init_psram to initialize pSRAM as well as some definitions.
Both AP and BSP shall call init_psram to make sure pSRAM is initialized, which is
required by PTCM.
BSP:
To parse PTCT and find the entry of PTCM command function, then call PTCM ABI.
AP:
Wait until BSP has done the parsing work, then call the PTCM ABI.
Synchronization of AP and BSP is ensured, both inside and outside PTCM.
2. Added calls of init_psram in init_pcpu_post to initialize pSRAM in HV booting phase
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
According 11.5.1 Cache Control Registers and Bits, Intel SDM Vol 3,
change CR0.CD will not flush cache to insure memory coherency. So
it's not needed to call wbinvd to flush cache in ACRN Hypervisor.
That's what the guest should do.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve the legacy vuart code. The legacy vuart insert the declaration
without checking if it's enabled. Refined the logic that if the legacy
is disabled, simply do not declare.
Tracked-On: #5425
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
generic
Add console and communication vuarts to:
misc/vm_configs/xmls/config-xmls/generic/<scenario>.xml
misc/vm_configs/xmls/config-xmls/template/<scenario>.xml
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Check if the scenario xmls configure pci vuarts properly
Sanity check of scenario xml:
1. check the format of console and communication vuarts
2. legacy vuart0 and console vuart0 cannot be eabled at the same time
3. legacy vuart1 and communication vuart1 cannot be enabled at the
same time
4. Any vuart should not connect to any type of vuart0
5. Every vuart can only connect to enabled vuart<idx> (idx > 0)
Tracked-On: #5425
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Add pci vuart to launch script if the pci vuart is enabled.
Add pci vuart sanity check for launch script:
- vuart0 and console vuart cannot be enabled at the same time
- vuart1 cannot be eabled if the legacy vuart 1 is enabled
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
- Find unused bdf for SOS and pre-launched VM's pci vuart if it's
enabled
- The vuart cannot detect the function difference, find the unused vbdf
based on "dev" increment
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Allocate unused vbar for pci based vuarts when the it's enabled for SOS
and/or pre-launched VMs.
- vuart needs 2 bar, both are 4k size
- for SOS, find unused vbar in the range which is assigned to pci host
bridge. The allocated vbar cannot have confilicts with any existing pci devices
- for pre-launched VMs, find unused vbar in the range 0x80000000 to
0xfffffff. The alloacted vbar cannot have confilicts with any
passthrough devices and mmio
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Preparing for upgrading to newer versions of doc building tools
including sphing, doxygen, breathe, docutils, etc. This PR's changes
still work find with the older tool versions, but should eliminate
issues found while moving to newer tool versions (later).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
when fix the issue of _PM_SystemS5 with life_mngr fail,
the vuart1(tty) item was devided into two parts, the last
part "/dev/tty*" which need to get will be added to the
end, so it should be handled singly, but it will be added
to other item too, such as vuart1(pty).
Tracked-On:#5366
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
cleanup vpci structure when shutdown_vm to avoid use uninitialized data
after reboot.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cteate method for vmcs9900 vdev in hypercalls.
The destroy method of ivshmem is also suitable for other emulated vdev,
move it into hcall_destroy_vdev() for all emulated vdevs
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
If acrn-dm create pci vuart with
'-s,<slot>,uart,vuart_idx:<value>', then acrn-dm will not
create pci uart at DM land, but create an vuart-pci virtual device
at HV land.
When create a HV land vuart-pci vdev, user must specify its vuart id.
Which is defined in vm_config, is the acrn_vm_pci_dev_config.vuart_idx
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
if vuart type is pci-vuart, then use MSI interrupt
split vuart_toggle_intr() control flow into vuart_trigger_level_intr() &
trigger_vmcs9900_msix(), because MSI is edge triggered, no deassertion
operation. Only trigger MSI for pci-vuart when assert interrupt.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
support pci-vuart type, and refine:
1.Rename init_vuart() to init_legacy_vuarts(), only init PIO type.
2.Rename deinit_vuart() to deinit_legacy_vuarts(), only deinit PIO type.
3.Move io handler code out of setup_vuart(), into init_legacy_vuarts()
4.add init_pci_vuart(), deinit_pci_vuart, for one pci vuart vdev.
and some change from requirement:
1.Increase MAX_VUART_NUM_PER_VM to 8.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
David B. Kinder