In current code, the timer_list for per cpu can be accessed both in
vmexit and softirq handler. There is a case that, the timer_list is
modifying in vmexit, but an interrupt occur, the timer_list is also
modified in softirq handler. So the time_list may in unpredictable
state. In some platforms, the hv console may hang as its timer handler
is not invoked because of the corruption for timer_list.
So, to fix the issue, disable the interrupt before modifying the
timer_list.
Tracked-On: #3512
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
In some case, guest need to get more information under virtual environment,
like guest capabilities. Basically this could be done by hypercalls, but
hypercalls are designed for trusted VM/SOS VM, We need a machenism to report
these information for normal VMs. In this patch, vCPUID leaf 0x40000001 will
be used to satisfy this needs that report some extended information for guest
by CPUID.
Tracked-On: #3498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The policy of vART is that software in native can run in
VM too. And in native side, the relationship between the
ART hardware and TSC is:
pTSC = (pART * M) / N + pAdjust
The vART solution is:
- Present the ART capability to guest through CPUID leaf
15H for M/N which identical to the physical values.
- PT devices see the pART (vART = pART).
- Guest expect: vTSC = vART * M / N + vAdjust.
- VMCS.OFFSET = vTSC - pTSC = vAdjust - pAdjust.
So to support vART, we should do the following:
1. if vAdjust and vTSC are changed by guest, we should change
VMCS.OFFSET accordingly.
2. Make the assumption that the pAjust is never touched by ACRN.
For #1, commit "a958fea hv: emulate IA32_TSC_ADJUST MSR" has implementation
it. And for #2, acrn never touch pAdjust.
--
v2 -> v3:
- Add comment when handle guest TSC_ADJUST and TSC accessing.
- Initialize the VMCS.OFFSET = vAdjust - pAdjust.
v1 -> v2
Refine commit message to describe the whole vART solution.
Tracked-On: #3501
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_BOARD value in defconfig should match with Makefile, otherwise
the build might be failed in some condition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently the Px Cx supported SoCs which listed in cpu_state_tbl.c is limited,
and it is not a wise option to build a huge state table data base to support
Px/Cx for other SoCs. This patch give a alternative solution that build a board
specific cpu state table in board.c which could be auto-generated by offline
tool, then the CPU Px/Cx of customer board could be enabled;
Hypervisor will search the cpu state table in cpu_state_tbl[] first, if not
found then go check board_cpu_state_tbl. If no matched cpu state table is found
then Px/Cx will not be supported;
Tracked-On: #3477
Signed-off-by: Victor Sun <victor.sun@intel.com>
After "commit f0e1c5e init vcpu host stack when reset vcpu", SOS resume form S3
wants to schedule to vcpu_thread not the point where SOS enter S3. So we should
schedule to idel first then reschedule to execute vcpu_thread.
Tracked-On: #3387
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When monitor/mwait is not supported, it still uses the inline assembly in
wait_sync_change. As it is not allowed based on MISRA-C, the asm wrapper
is used for pause scenario in wait_sync_change.
Tracked-On: #3442
Suggested-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Based on SDM Vol2 the monitor uses the RAX register to setup the address
monitored by HW. The mwait uses the rax/rcx as the hints that the process
will enter. It is incorrect that the same value is used for monitor/mwait.
The ecx in mwait specifies the optional externsions.
At the same time it needs to check whether the the value of monitored addr
is already expected before entering mwait. Otherwise it will have possible
lockup.
V1->V2: Add the asm wrappper of monitor/mwait to avoid the mixed usage of
inline assembly in wait_sync_change
v2-v3: Remove the unnecessary line break in asm_monitor/asm_mwait.
Follow Fei's comment to remove the mwait ecx hint setting that
treats the interrupt as break event. It only needs to check whether the
value of psync_change is already expected.
Tracked-On: #3442
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When need hpa and hva translation before init_paging, we need hpa2hva_early and
hva2hpa_early since init_paging may modify hva2hpa to not be identical mapping.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) Using printf to warn if platform ram size configuration is wrong.
2) Using printf to warn if the platform is not supported by ACRN hypervisor.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PMC is hidden from guest and hypervisor should
inject UD to guest when 'rdpmc' vmexit.
Tracked-On: #3453
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Per SDM, writing 0 to MSR_IA32_MCG_STATUS is allowed, HV should not
return -EACCES on this case;
Tracked-On: #3454
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vbar info which hard-coded in scenarios/logical_partition/pt_dev.c
is board specific actually, so move these information to
arch/x86/configs/$(CONFIG_BOARD)/pci_devices.h.
Please be aware that the memory range of vBAR should exactly match with
the e820 layout of VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
NUC7i7BNH is not a board name but a product name of KBL NUC, and it is
outdated to support LOGICAL_PARTITION scenario and HYBRID scenario.
NUC7i7DNH is the product name of KBL NUC that ACRN currently supported,
but its official board name is NUC7i7DNB, so change the folder name from
"nuc7i7bnh" to "nuc7i7dnb" under arch/x86/configs/.
Please refer more details on below documentation:
Intel® NUC Board/Kit NUC7i7DN Technical Product Specification
Tracked-On: #3446
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
'invept' is not expected in guest and hypervisor should
inject UD when 'invept' VM exit happens.
Tracked-On: #3444
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Otherwise, the previous local variables in host stack is not reset.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
softirq shouldn't be bounded to vcpu thread. One issue for this
is shell (based on timer) can't work if we don't start any guest.
This change also is trying best to make softirq handler running
with irq enabled.
Also update the irq disable/enabel in vmexit handler to align
with the usage in vcpu_thread.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because we depend on guest OS to switch x2apic mode to enable lapic pass-thru, vlapic is working at the early stage of booting, eg: in virtual boot loader.
After lapic pass-thru enabled, no interrupt should be injected via vlapic any more.
This commit resets the vlapic to clear the pending status and adds ptapic_ops to enforce that no more interrupt accepted/injected via vlapic.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
When initialize secondary pcpu, pass INVALID_CPU_ID as param of init_pcpu_pre()
looks weird, so change the param type to bool to represent whether the pcpu is
a BSP or AP.
Tracked-On: #3420
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vCPU schedule state change is under schedule lock protection. So there's no need
to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, vCPUs are created on BSP one by one; For post-launched VMs,
vCPUs are created under vmm_hypercall_lock protection. So vcpu_create is called sequentially.
Operation in vcpu_create don't need to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For per-vCPU, EOI exit bitmap is a global parameter which should set or clear
atomically since there's no lock to protect this critical variable.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
It's a global parameter and could be set concurrently. So it should be set atomically.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fenwgei <fengwei.yin@intel.com>
In current design, devicemodel passes VM UUID to create VMs and hypervisor
would check the UUID whether it is matched with the one in VM configurations.
Kata container would maintain few UUIDs to let ACRN launch the VM, so
hypervisor need to add these UUIDs in VM configurations for Kata running.
In the hypercall of hcall_get_platform_info(), hypervisor will report the
maximum Kata container number it will support. The patch will add a Kconfig
to indicate the maximum Kata container number that SOS could support.
In current stage, only one Kata container is supported by SOS on SDC scenario
so add one UUID for Kata container in SDC VM configuration. If we want to
support Kata on other scenarios in the future, we could follow the example
of this patch;
Tracked-On: #3402
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
- To support grub multiboot for nuc6cayh, we should put hv ram start
at a suitable address;
- Enable HSUART controller at PCI 0:18.0 as HV serail port;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add ve820 table for apl nuc board to enable prelaunched VM on it;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) add a write memory barrier after setting pcpu_sync to one to let this change
visible to AP immediately.
2) there's only BSP will set pcpu_sync, so there's no memory order issue between CPUs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hypervisor exposes mitigation technique for Speculative
Store Bypass(SSB) to guests and allows a guest to determine
whether to enable SSBD mitigation by providing direct guest
access to IA32_SPEC_CTRL.
Before that, hypervisor should check the SSB mitigation support
on underlying processor, this patch is to add this capability check.
Tracked-On: #3385
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Fix the violations list below:
1.Function should have one return entry.
2.Do not use -- or ++ operation.
3.For loop should be simple, shall not use comma operations.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cancel_event_injection is not need any more if we do 'scheudle' prior to
acrn_handle_pending_request. Commit "921288a6672: hv: fix interrupt
lost when do acrn_handle_pending_request twice" bring 'schedule'
forward, so remove cancel_event_injection related stuff.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN Coding guidelines requires no dead code.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Microarchitectural Data Sampling (MDS) is a hardware vulnerability
which allows unprivileged speculative access to data which is available
in various CPU internal buffers.
1. Mitigation on ACRN:
1) Microcode update is required.
2) Clear CPU internal buffers (store buffer, load buffer and
load port) if current CPU is affected by MDS, when VM entry
to avoid any information leakage to guest thru above buffers.
3) Mitigation is not needed if ARCH_CAP_MDS_NO bit (bit5)
is set in IA32_ARCH_CAPABILITIES MSR (10AH), in this case,
current processor is no affected by MDS vulnerability, in other
cases mitigation for MDS is required.
2. Methods to clear CPU buffers (microcode update is required):
1) L1D cache flush
2) VERW instruction
Either of above operations will trigger clearing all
CPU internal buffers if this CPU is affected by MDS.
Above mechnism is enumerated by:
CPUID.(EAX=7H, ECX=0):EDX[MD_CLEAR=10].
3. Mitigation details on ACRN:
if (processor is affected by MDS)
if (processor is not affected by L1TF OR
L1D flush is not launched on VM Entry)
execute VERW instruction when VM entry.
endif
endif
4. Referrence:
Deep Dive: Intel Analysis of Microarchitectural Data Sampling
https://software.intel.com/security-software-guidance/insights/
deep-dive-intel-analysis-microarchitectural-data-sampling
Deep Dive: CPUID Enumeration and Architectural MSRs
https://software.intel.com/security-software-guidance/insights/
deep-dive-cpuid-enumeration-and-architectural-msrs
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
ACRN hypervisor always print CPU microcode update
warning message on KBL NUC platform, even after
BIOS was updated to the latest.
'check_cpu_security_cap()' returns false if
no ARCH_CAPABILITIES MSR support on current platform,
but this MSR may not be available on some platforms.
This patch is to remove this pre-condition.
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
1. reset polarity of ptirq_remapping_info to zero.
this help to set correct initial pin state, and fix the interrupt lost issue
when assign a ptirq to uos.
2. since vioapic_generate_intr relys on rte, we should build rte before
generating an interrput, this fix the redundant interrupt.
Tracked-On: #3362
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
According to SDM, xsetbv writes the contents of registers EDX:EAX into the 64-bit
extended control register (XCR) specified in the ECX register. (On processors
that support the Intel 64 architecture, the high-order 32 bits of RCX are ignored.)
In current code, RCX is checked, should ingore the high-order 32bits.
Tracked-On: #3360
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The current implement will trigger shutdown vm request on the BSP VCPU on the VM,
not the VCPU will trap out because triple fault. However, if the BSP VCPU on the VM
is handling another IO emulation, it may overwrite the triple fault IO request on
the vhm_request_buffer in function acrn_insert_request. The atomic operation of
get_vhm_req_state can't guarantee the vhm_request_buffer will not access by another
IO request if it is not running on the corresponding VCPU. So it should trigger
triple fault shutdown VM IO request on the VCPU which trap out because of triple
fault exception.
Besides, rt_vm_pm1a_io_write will do the right thing which we shouldn't do it in
triple_fault_shutdown_vm.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
According to SDM, bit N (physical address width) to bit 63 should be masked when calculate
host page frame number.
Currently, hypervisor doesn't set any of these bits, so gpa2hpa can work as expectd.
However, any of these bit set, gpa2hpa return wrong value.
Hypervisor never sets bit N to bit 51 (reserved bits), for simplicity, just mask bit 52 to bit 63.
Tracked-On: #3352
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN coding guideline requires function shall have only one return entry.
Fix it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu is never scan because of scan tool will be crashed!
After modulization, the vcpu can be scaned by the scan tool.
Clean up the violations in vcpu.c.
Fix the violations:
1.No brackets to then/else.
2.Function return value not checked.
3.Signed/unsigned coversion without cast.
V1->V2:
change the type of "vcpu->arch.irq_window_enabled" to bool.
V2->V3:
add "void *" prefix on the 1st parameter of memset.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The sbuf is allocated for each pcpu by hypercall from SOS. Before launch
Guest OS, the script will offline cpus, which will trigger vcpu reset and
then reset sbuf pointer. But sbuf only initiate once by SOS, so these
cpus for Guest OS has no sbuf to use. Thus, when run 'acrntrace' on SOS,
there is no trace data for Guest OS.
To fix the issue, only reset the sbuf for SOS.
Tracked-On: #3335
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The current implement will cache each ISR vector in ISR vector stack and do
ISR vector stack check when updating PPR. However, there is no need to do this
because:
1) We will not touch vlapic->isrvec_stk[0] except doing vlapic_reset:
So we don't need to do vlapic->isrvec_stk[0] check.
2) We only deliver higher priority interrupt from IRR to ISR:
So we don't need to check whether vlapic->isrvec_stk interrupts is always increasing.
3) There're only 15 different priority interrupt, It will not happened that more that
15 interrupts could been delivered to ISR:
So we don't need to check whether vlapic->isrvec_stk_top will larger than
ISRVEC_STK_SIZE which is 16.
This patch try to remove ISR vector stack and use isrv to cache the vector number for
the highest priority bit that is set in the ISR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Fix the violations not touched the logical.
1.Function return value not checked.
2.Logical conjuctions need brackets.
3.No brackets to then/else.
4.Type conversion without cast.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Remove couple of run-time ASSERTs in ioapic module by checking for the
number of interrupt pins per IO-APICs against the configured MAX_IOAPIC_LINES
in the initialization flow.
Also remove the need for two MACROs specifying the max. number of
interrupt lines per IO-APIC and add a config item MAX_IOAPIC_LINES for the
same.
Tracked-On: #3299
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires inline functions should be declared static,
these APIs are external interfaces,remove inline
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: arch/x86/guest/vcpu.c
MISRA-C standard requires the type of result of expression in if/while pattern shall be boolean.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
There are a lot of works to do between create_vm (HV will mark vm's state
as VM_CREATED at this stage) and vm_run (HV will mark vm's state as VM_STARTED),
like building mptable/acpi table, initializing mevent and vdevs. If there is
something goes wrong between create_vm and vm_run, the devicemodel will jumps
to the deinit process and will try to destroy the vm. For example, if the
vm_init_vdevs failed, the devicemodel will jumps to dev_fail and then destroy
the vm.
For normal vm in above situation, it is fine to destroy vm. And we can create and
start it next time. But for RTVM, we can't destroy the vm as the vm's state is
VM_CREATED. And we can only destroy vm when its state is VM_POWERING_OFF. So, the
vm will stay at VM_CREATED state and we will never have chance to destroy it.
Consequently, we can't create and start the vm next time.
This patch fixes it by allowing to pause and then destroy RTVM when its state is VM_CREATED.
Tracked-On: #3069
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
wbinvd is used to write back all modified cache lines in the processor's
internal cache to main memory and invalidates(flushes) the internal caches.
Using clflushopt instructions to emulate wbinvd to flush each
guest vm memory, if CLFLUSHOPT is not supported, boot will fail.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The has_rt_vm walk through all VMs to check RT VM flag and if
there is no any RT VM, then return false otherwise return true.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The ept_flush_leaf_page API is used to flush address space
from a ept page entry, user can use it to match walk_ept_mr to
flush VM address space.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The walk_ept_table API is used to walk through EPT table for getting
all of present pages, user can get each page entry and its size
from the walk_ept_table callback.
The get_ept_entry is used to getting EPT pointer of the vm, if current
context of mv is secure world, return secure world EPT pointer, otherwise
return normal world EPT pointer.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
flush_address_space is used to flush address space by clflushopt instruction.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CLFLUSHOPT is used to invalidate from every level of the cache hierarchy
in the cache coherence domain the cache line that contains the linear
address specified with memory operand. If that cache line contains
modified date at any level of the cache hierarchy, that data is written
back to memory.
If the platform does not support CLFLUSHOPT instruction, boot will fail.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement doesn't clear which access type we support for
APIC-Access VM Exit:
1) linear access for an instruction fetch
-- APIC-access page is mapped as UC which doesn't support fetch
2) linear access (read or write) during event delivery
-- Which is not happened in normal case except the guest went wrong, such as,
set the IDT table in APIC-access page. In this case, we don't need to support.
3) guest-physical access during event delivery;
guest-physical access for an instruction fetch or during instruction execution
-- Do we plan to support enable APIC in real mode ? I don't think so.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces check_vm_vlapic_state API instead of is_lapic_pt_enabled
to check if all the vCPUs of a VM are using x2APIC mode and LAPIC
pass-through is enabled on all of them.
When the VM is in VM_VLAPIC_TRANSITION or VM_VLAPIC_DISABLED state,
following conditions apply.
1) For pass-thru MSI interrupts, interrupt source is not programmed.
2) For DM emulated device MSI interrupts, interrupt is not delivered.
3) For IPIs, it will work only if the sender and destination are both in x2APIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vLAPIC state for a VM. The VM vLAPIC state can
be one of the following
* VM_VLAPIC_X2APIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use x2APIC mode
* VM_VLAPIC_XAPIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use xAPIC mode
* VM_VLAPIC_DISABLED - All the vCPUs/vLAPICs of this VM are in Disabled mode
* VM_VLAPIC_TRANSITION - Some of the vCPUs/vLAPICs of this VM (Except for those in Disabled mode)
are in xAPIC and the others in x2APIC
Upon a vCPU updating the IA32_APIC_BASE MSR to switch LAPIC mode, this
API is called to sync the vLAPIC state of the VM. Upon VM creation and reset,
vLAPIC state is set to VM_VLAPIC_XAPIC, as ACRN starts the vCPUs vLAPIC in
XAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_xapic_enabled API returns true if vLAPIC is in xAPIC mode. In
all other cases, it returns false.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove static and inline attributes to the API is_x2apic_enabled
and declare a prototype in vlapic.h. Also fix the check performed on guest
APICBASE_MSR value to query vLAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch changes the code in vlapic_set_apicbase for the following reasons
1) Better readability as it first checks if the new value programmed into
MSR is any different from the existing value cached in guest structures
2) Check if both bits 11:10 are set before enabling x2APIC mode for guest.
Current code does not check if Bit 11 is set.
3) Add TODO in the comments, to detail about the current gaps in
IA32_APIC_BASE MSR emulation.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:Initial Patch
Modularize vpic. The current patch reduces the usage
of acrn_vm inside the vpic.c file.
Due to the global natire of register_pio_handler, where
acrn_vm is being passed, some usage remains.
These needs to be a separate "interface" file.
That will come in smaller newer patch provided
this patch is accepted.
V2:
Incorporated comments from Jason.
V3:
Fixed some MISRA-C Violations.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This commit extract pm io handler registration code to register_pm_io_handler()
to reduce the cyclomatic complexity of create_vm() in order to be complied with
MISRA-C rules.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
When the lapic is passthru, vpic and vioapic cannot be used anymore. In
current code, user can still inject vpic interrupt to Guest OS, this is
not allowed.
This patch remove the vpic and vioapic initiate functions during
creating VM with lapic passthru. But the APIs in vpic and vioapic are
called in many places, for these APIs, follow the below principles:
1. For the APIs which will access uninitiated variables, and may case
hypervisor hang, add @pre to make sure user should call them after vpic or
vioapic is initiated.
2. For the APIs which only return some static value, do noting with them.
3. For the APIs which user will called to inject interrupt, such as
vioapic_set_irqline_lock or vpic_set_irqline, add condition in these
APIs to make sure it only inject interrupt when vpic or vioapic is
initiated. This change is to make sure the vuart or hypercall need not
to care whether lapic is passthru or the vpic and vioapic is initiated
or not.
Tracked-On: #3227
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
On SDC scenario, SOS VM id is fixed to 0 so some hypercalls from guest
are using hardcoded "0" to represent SOS VM, this would bring issues
for HYBRID scenario which SOS VM id is non-zero.
Now introducing a new VM id concept for DM/VHM hypercall APIs, that
return a relative VM id which is from SOS view when create VM for post-
launched VMs. DM/VHM could always treat their own vm id is "0". When they
make hypercalls, hypervisor will convert the VM id to the absolute id
when dispatch the hypercalls.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes:
- In current design, the hypercall is only allowed calling from SOS or
trusty VM, so separate the trusty hypercalls from dispatch_hypercall().
The vm parameter which referenced by hcall_xxx() should be SOS VM;
- do not inject #UD for hypercalls from non-SOS, just return -ENODEV;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to SDM vol1 13.3:
Write 1 to reserved bit of XCR0 will trigger GP.
This patch make ACRN behavior align with SDM definition.
Tracked-On: #3239
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix potential null pointer dereference
1, will access null pointer if 'context' is null.
2, if entry already been added to the VM when add
intx entry for this vm, but parameter virt_pin
is not equal to entry->virt_sid.intx_id.pin. So
will saves this entry address to
vpin_to_pt_entry[entry->virt_sid.intx_id.pin] and
vpin_to_pt_entry[virt_pin]. In this case, this entry
will be freed twice.
Tracked-On: #3217
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Host ACPI parsing is needed during initialization only, not in run time.
Hence we don't need to clear U flag for memory in reserved or ACPI type
E820 entries.
- move enable_smep() and enable_smap() to the end of init_pcpu_post(),
so stac()/clac() can be removed from any init code before this point.
- call init_seed() before init_pcpu_post(), and rmeove stac()/clac() from
init_seed().
Tracked-On: #3194
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Need to call hv_access_memory_region_update() explicitly for DRHD
registers to correctly grant access rights for hypervisor.
Currently, other hv_access_memory_region_update() calls happen to
cover the DRHD addresses for currently supported platforms.
Tracked-On: #3194
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The memory size and IOMMU number are refined to meet with ICL board requirement.
Otherwise the ACRN hypervisor can't be booted on the new ICL board.
ICL(the abbreviation of Ice Lake) is the next generation platform based on 10nm.
CPU is based on Sunny Cove microarchitecture and GPU is based on gen11.
The new board is named as icl-rvp.
Tracked-On: #3216
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently vlapic id of SOS VM is virtualized, it is indexed by vcpuid in
physical APIC id sequence, but CPUID 0BH leaf still report physical
APIC ID. In SDC/INDUSTRY scenario they are identical mapping so no issue
occured. In hybrid mode this would be a problem because vAPIC ID might
be different with pAPIC ID. We need to make the APIC ID which returned from
CPUID consistent with the one returned from LAPIC register.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hybrid scenario will run 3 VMs: one pre-launched VM, one pre-launched SOS VM
and one post-launched Standard VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
to support grub multiboot for nuc7i7bnh, we should put hv ram start
at a suitable address as SOS bzImage may need use 0x1000000
Tracked-On: #3214
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The vcpu num could be calculated based on pcpu_bitmap when prepare_vcpu()
is done, so remove this redundant configuration item;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
vm_apicid2vcpu_id() might return invalid vcpu id, when this happens
we should return -1 in vlapic_x2apic_pt_icr_access();
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The print message of source and target vcpu id is incorrect, fix it.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Some OS like Zephyr need to run at 0x100000, so modify the ve820 table
accordingly;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously the bootargs of SOS_VM is stored in a text file and stitched
into multiboot mods[0].string whereas the bootargs of PRE_LAUNCHED_VM is
stored in vm_configurations.c. Given the mods[].string will be used to
store Kernel image signature under hybrid mode, move the bootargs of SOS_VM
to vm configurations also to make it consistent with PRE_LAUNCHED_VM;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Use a misc_cfg.h in each board configs folder so that VM configurations
could include board specific MACROs;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Add vuart_deinit to vm shutdown so that the vuart resource can be
reset, and when the Guest VM restart, it could have right state.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently when get_rsdp is called, the EFI depriv_boot env is not initialized.
In such case it will fallback to the legacy mechanism of ACPI table.
If the ACPI table based on legacy mechanism is not found, it will fail to get
the ACPI table and then the system will hang.
On the old platform it still can parse the ACPI table from legacy mechanism.
In fact when EFI RSDP exists, the EFI RSDP is preferred instead of legacy ACPI
RSDP.
In order to avoid multiple calling of depriv_init_boot, the init_boot_operations
is renamed and called after X2apic is enabled(early_init_lapic).
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to Chap 23.8 RESTRICTIONS ON VMX OPERATION, Vol 3, SDM:
"Any attempt to set one of these bits to an unsupported value while in VMX
operation (including VMX root operation) using any of the CLTS, LMSW, or
MOV CR instructions causes a general-protection exception."
So we don't need to trap them out then inject the GP in hypervisor.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
FuSa requires setting CR4.SMAP/SMEP/PKE will invalidate the TLB. However,
setting CR4.SMAP will invalidate the TLB on native while not in non-root mode.
To make sure this, we will trap CR4.SMAP/SMEP/PKE setting to invalidate the TLB
in root mode.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since the vapic_id is from VM, need to check for pre-condition before passing
vcpu_id to vcpu_from_vid. This is in the path of LAPIC passthrough ICR
access
Tracked-On: #3170
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Present SGX related MSRs to guest if SGX is supported.
- MSR_IA32_SGXLEPUBKEYHASH0 ~ MSR_IA32_SGXLEPUBKEYHASH3:
SGX Launch Control is not supported, so these MSRs are read only.
- MSR_IA32_SGX_SVN_STATUS:
read only
- MSR_IA32_FEATURE_CONTROL:
If SGX is support in VM, opt-in SGX in this MSR.
- MSR_SGXOWNEREPOCH0 ~ MSR_SGXOWNEREPOCH1:
The two MSRs' scope is package level, not allow guest to change them.
Still leave them in unsupported_msrs array.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If sgx is supported in guest, present SGX capabilities to guest.
There will be only one EPC section presented to guest, even if EPC
memory for a guest is from muiltiple physcial EPC sections.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Build EPT entries for SGX EPC resource for VMs.
- SOS: EPC resrouce will be removed from EPT of SOS, don't support SGX virtualization for SOS.
- Non-SOS: build ept mapping for EPC resource for guest.
Guest base address and size is specified in vm configuration.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add EPC information in vm configuration structure.
EPC information contains the EPC base and size allocated to a VM.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Get the platform EPC resource and partiton the EPC resource for VMs
according to VM configurations.
Don't support sgx capability in SOS VM.
init_sgx is called during platform bsp initialization.
If init_sgx() fails, consider it as configuration error, panic the system.
init_sgx() fails if one of the following happens when at least one VM requests
EPC resource if no enough EPC resource for all VMs.
No further check if sgx is not supported by platform or not opted-in in BIOS,
just disable SGX support for VMs.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we call reset_vm() function to reset vm, the vm state
should be reset to VM_CREATED as well.
Tracked-On: #3182
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix a logic error when set iommu page walk coherent.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define a static mptable array and each VM could index its vmptable by
vm id, then mptable is not needed in vm configurations;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, vpci do the pci enumartion and add pci devices to the
context table of iommu.
Need to enable iommu DMA address translation later than vpci init.
Otherwise, in UEFI platform, there will be a shot time that address translation
is enabled, but the context table is not setup.
For the devices active in UEFI environment will have problem on address translation.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
At the time the guest is switching to X2APIC mode, different VCPUs in the
same VM could expect the setting of the per VM msr_bitmap differently,
which could cause problems.
Considering different approaches to address this issue:
1) only guest BSP can update msr_bitmap when switching to X2APIC.
2) carefully re-write the update_msr_bitmap_x2apic_xxx() functions to
make sure any bit in the bitmap won't be toggled by the VCPUs.
3) make msr_bitmap as per VCPU.
We chose option 3) because it's simple and clean, though it takes more
memory than other options.
BTW, need to remove const modifier from update_msr_bitmap_x2apic_xxx()
functions to get it compiled.
Tracked-On: #3166
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
APL NUC would expose different MWAIT support status with different
BIOS configuration, then the acpi idle driver would have problem if
we provide MWAIT Cx data only. Now we will enforce guest enter port
IO Cx even BIOS expose support of MWAIT.
Given all Broxton family share same port IO Cx data, we use a unified
struct cpu_cx_data cx_bxt[] for all Broxton SoCs;
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The previous function just check the pstate target value in PERF_CTL msr
by indexing px data control value which comes from ACPI table, this would
bring a bug in the case that guest is running intel_pstate_driver:
the turbo pstate target value from intel_pstate driver is in a range
instead of fixed value in ACPI _PSS table, thus the turbo px request would
be rejected. This patch fixed this issue.
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Add Px/Cx data of Intel Core(TM) i7-8650U CPU which used by NUC7i7DNH to
enable guest controlled CPU power states;
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
filter out prelaunched vm memory from e820 table
and unmap prelaunched vm memory from ept table
before boot service OS
Tracked-On: #3148
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add the GUEST_FLAG_HIGHEST_SEVERITY flag to indicate that the guest has
privilege to reboot the host system.
- this flag is statically assigned to guest(s) in vm_configurations.c in
different scenarios.
- implement reset_host() function to reset the host. First try the ACPI
reset register if available, then try the 0xcf9 PIO.
Tracked-On: #3145
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And make other related changes accordingly:
Remove pci_pdev_enumeration_cb define
Create init_vdevs() to iterate through the pdev list and create vdev for each pdev
Export num_pci_pdev and pci_pdev_array as globals in header file
Minor cosmetic fix:
Remove trailing whitespace
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
the pcpu just write its own vmcs, not need spinlock.
and the arch.lock not used other places, remove it too.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add spinlock to dmar_enable_qi & dmar_disable_qi to protect
struct dmar_unit variables; keep consistent with other same
level functions.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements triple fault vmexit handler and base on VM types:
- post-launched VMs: shutdown_target_vm() injects S5 PIO write to request
DM to shut down the target VM.
- pre-launched VMs: shut down the guest.
- SOS: similarly, but shut down all the non real-time post-launched VMs that
depend to SOS before shutting down SOS.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) According SDM Vol 3, Chap 29.1.2, Any VM exit caused by TPR virtualization
is trap-like: the instruction causing TPR virtualization completes before the VM
exit occurs (for example, the value of CS:RIP saved in the guest-state area of
the VMCS references the next instruction). So we need to retain the RIP.
2) The previous implement only consides the situation the guest will reduce the
TPR. However, the guest will increase it. So we need to update the PPR before we
find a deliverable interrupt. For examples: a) if the guest increase the TPR before
a irq windows vmexit, we need to update the PPR when check whether there has a pending
delivery interrupt or not; b) if the guest increase the TPR, then an external irq raised,
we need to update the PPR when check whether there has a deliverable interrupt to inject
to guest.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For prelaunched VM, Service OS and postlaunched RT VM, we only need the vRTC
provides backed-up date, so we could use the simple vRTC which implemented
in hypervisor. For postlaunched VM (which is not a RT VM), we needs the device
module to emulate the vRTC for it.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now there are 2 static_checks.c,
./arch/x86/static_checks.c
./common/static_checks.c
they are used for static checks when build time,
this check should not belong to any HV layer from
modularization view, then add and move it to pre_build folder.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
modified: Makefile
deleted: common/static_checks.c
renamed: arch/x86/static_checks.c -> pre_build/static_checks.c
There're some instructions which not support bit 0(w bit) flag but which
memory opcode size is fixed and the memory opcode size is not equal to the
register opcode size. In our code, there is movzx (which opcode is 0F B7)
which memory opcode size is fixed to 16 bits. So add a flag VIE_OP_F_WORD_OP
to indicate a instruction which memory opcode size is fixed to 16 bits.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
This patch refines 'init_percpu_lapic_id' to move the error
handling to 'init_pcpu_pre'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch adds default DRHD MACROs in template platform acpi info.
It is the preparation patch to remove dynamic memory allocation
in dmar_parse.c. So that the dmar info can be initialized with
default size and values when CONFIG_DMAR_PARSE_ENABLED is set
to y.
v1 -> v2: no change
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Add MSR_IA32_MISC_ENABLE to emulated_guest_msrs to enable the emulation.
Init MSR_IA32_MISC_ENABLE for guest.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM Vol4 2.1, modify vcpuid according to msr ia32_misc_enable:
- Clear CPUID.01H: ECX[3] if guest disabled monitor/mwait.
- Clear CPUID.80000001H: EDX[20] if guest set XD Bit Disable.
- Limit the CPUID leave maximum value to 2 if guest set Limit CPUID MAXVal.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest MSR_IA32_MISC_ENABLE read simply returns the value set by guest.
Guest MSR_IA32_MISC_ENABLE write:
- Clear EFER.NXE if MSR_IA32_MISC_ENABLE_XD_DISABLE set.
- MSR_IA32_MISC_ENABLE_MONITOR_ENA:
Allow guest to control this feature when HV doesn't use this feature and hw has no bug.
vcpuid update according to the change of the msr will be covered in following patch.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Merge two parts of different definitions for MSR_IA32_MISC_ENABLE fields.
- use the prefix "MSR_IA32_" to align with others
- Change MSR_IA32_MISC_ENABLE_XD to MSR_IA32_MISC_ENABLE_XD_DISABLE to
align the meaning of the filed since it is "XD bit disable"
Use UL instead of U as the filed bit mask because MSR_IA32_MISC_ENABLE is 64-bit.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The interface struct & API changes like below:
struct uefi_context->struct depri_boot_context
init_firmware_operations()->init_vboot_operations()
init_firmware()->init_vboot()
firmware_init_irq()->init_vboot_irq()
firmware_get_rsdp()->get_rsdp_ptr()
firmware_get_ap_trampoline()->get_ap_trampoline_buf()
firmware_init_vm_boot_info()->init_vm_boot_info()
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace the vm state VM_STATE_INVALID to VM_POWERED_OFF.
Also replace is_valid_vm() with is_poweroff_vm().
Add API is_created_vm() to identify VM created state.
Tracked-On: #3082
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
vm_config.h has included types.h/acrn_common.h/vm_configurations.h,
acrn_common.h has included types.h, so remove the redundant includes;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
The MACRO of CONFIG_CONSTANT_ACPI will be defined per scenario usage,
so move it from Kconfig to vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously ACPI PM1A register info was hardcoded to 0 in HV for generic boards,
but SOS still can know the real PM1A info so the system would hang if user
trigger S3 in SOS. Enabling PM1A register info fixup will let HV be able to
intercept the operation on PM1A and then make basic function of S3 work for
all boards;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Conghui Chen