atmel_sam watchdog driver was temporarily limited to SAME70
series only. Now that all SAM series are using ASF the
change can be reverted.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This patch add arm core MPU support to NXP MPU driver.
With this feature it is now possible to enable stack guarding on NXP
MPUs.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Static code analysis reported some kernel APIs were used without
reading the return value. Since the benchmark doesn't need error
conditions, a simple read of the values followed by a ARG_UNUSED
is used to handle static code analysis errors.
JIRA: ZEP-2134
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Instead of requiring the dts overlay files to be at the top level
directory (where make is invoked), allow this default to be overridden
by setting DTS_OVERLAY_DIR. This is a directory where the overlays
themselves (which are still named $(BOARD_NAME).overlay) will live.
Change-Id: Ie9796afbd27971650b7636a36149c0d1f8e2b9fb
Signed-off-by: David Brown <david.brown@linaro.org>
This patch adds a dependency for the DTS overlay so that the DTS is
compiled when the state of the overlay file changes.
Change-Id: I2affe67f90f56b1d97384d5cd4e3026abed24253
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Due to several changes in the way stacks are calculated, 320 bytes is no
longer enough for the controller-only build. After measuring usages of
up to 320 bytes (locally) and 376 (reported by Ricardo Salveti), the
stack size is increased by 128 bytes, up to 448 bytes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Until we have better solution, we enable promiscuous mode as a
workaround to get IPv6 neighbour discovery going. Kconfig had
typos/thinkos preventing that to work however.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The msgtype value is created using 'hdr & 3' which means that the
resulting value can never be greater than 3. This fixes Coverity CID
166771.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As this is a test, it's minor issue, but let's keep Coverity report
clean.
Coverity-CID: 169303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No need to check attr and path variables for null as they
cannot be null.
Coverity-CID: 157595
Coverity-CID: 157602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Source had CONFIG_ETH_MCUX_PHY_DETAILED_DEBUG, while Kconfig had
CONFIG_ETH_MCUX_PHY_EXTRA_DEBUG. Use the shorter name consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added implementation to auto-update LE Data Length to max.
Tx octets supported by the local and peer controllers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle an incoming Reject Ext Ind PDU in
response to a sent Length Req PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When initiating Data Length Change at the same instant the
crossover condition was not handled correctly causing the
controller to assert.
This fix will allow crossover of Data Length Update
procedure, and this collison is harmless as per Bluetooth
specification, and gracefully handled by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Return error codes for HCI Tx buffer overflow conditions are
missing which would lead to silent dropping of Tx packets if
host implementations do not follow number of completed packets
or use correct buffer counts as returned by HCI Read Buffer
Size command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add beeps whenever the ball hits the walls or the paddle. Requires a
piezo buzzer connected to pin 0.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial draft of a pong game using the display on the micro:bit
and its two buttons. This draft only supports a solo game where the
ball bounces from the "roof" and lets the player play against himself.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allow the caller to delay the closing of the HTTP connection
for a number of milliseconds. The purpose for this is that
the client can send still some data back to us for a short
period of time.
This is needed for example for Basic authentication so that
server is able to receive authentication values back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Documentation doesn't specify if this function may return 0, so add an
inexpensive check to account for this.
Jira: ZEP-2135
CID: 160954
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
These files are no longer used and can be removed.
Change-Id: I781256ab93b5364346d99cd4aac488762c437151
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
With the required patch already being upstream, we can now redirect
users to the standard vanilla DTC tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The 0.9.1 SDK is now required to cover all architectures and to enable
tests on all plartforms supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This image installs sphinx 1.5.5 which is the version currently
supported by Zephyr. Newer versions seem to have issues building our
documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
EEPROM read mode is a specific mode where the controller will TX a
command to the slave, and once done, will read as many bytes requested.
The gain relies in the controller generating all necessary dummy bytes
by itself to read data the from slave, it will only generate RX
interrupts. Thus reducing CPU work.
Obviously TX and RX buffers should be relevantly provided by the user.
If not supported by the controller, the driver can still work (it will
have to generate the dummy bytes) and thus -EINVAL should not be
returned for that configuration bit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CS is controlled over GPIO, it will be possible to keep the slave up
and running (though no transaction will be going on) using this
configuration bit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI_HOLD_ON_CS can be used to ask the SPI device to keep CS on, after
the transaction. And this undefinitely, until another config is used.
This will inhibate the gpio cs delay, if any. This might be useful when
doing consecutive calls on one slave without releasing the CS.
SPI_LOCK_ON is to be used with caution as it will keep the SPI device
locked for the current config being used after each transaction. This
can be necessary if one needs to do consecutive calls on a slave without
any olher caller to interfere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This gives a quicke example on how to use SPI asynchronous calls with
kernel's k_poll API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All is done through the generic spi_context driver's API as it will be
generic to all SPI drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a struct k_poll_signal parameter to driver's API unique
exposed function.
If not NULL, the call will be handled as asynchronous and will
return right after the transaction has started, on the contrary
of current logic where is waits for the transaction to finish
(= synchronous).
In order to save stack, let's move the device pointer to struct
spi_config. So the call is still at a maximum of 4 parameters.
Adapting spi_dw.c and spi driver sample to the change so it still
builts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Piotr Mienkowski