Update Cube version for STM32L4XX family
from version: V1.6.0
to version: V1.8.0
Add support for following soc:
stm32l496xx
stm32l4a6xx
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
As we now only support DTS for ARM based SoCs we can remove any
associated !HAS_DTS bits in Kconfig. The Nordic NRF5 serial driver and
the ARM CMSDK APB serial drivers had Kconfig bits related to !HAS_DTS
builds.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we now select HAS_DTS from the cortex-m Kconfig we don't need it
in 96b_carbon_nrf51_defconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Change emsk to EM Starter Kit
* Fix some typos
* Add more statement for steps of using EM Starter Kit
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Due to support updated from 2.2 to 2.3, a debug script is provided
for emsk, so developer can directly debug the zephyr application
using commands such as follows.
+ make BOARD=em_starterkit debug
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
There is not enough memory to run the HTTP server sample
application in Arduino-101 so remove the config file.
Jira: ZEP-2157
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address family of the UDP port listener was not set. This
caused weird debug prints in net-shell. Now the listener will
be registering IPv4 any address as it should.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection handler was registered, the checker function
introduced in commit 43b37cef ("Check duplicate UDP/TCP connection
handlers") did not check the address family (IPv4 or IPv6) of
the local end point properly. This caused duplicate connection
error to be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the new option for running sanitycheck on multiple nodes and cleanup
unused and obsolete checks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This tests enables all networking features and requires lots of RAM, so
increase the available RAM to avoid failures due to not enough RAM when
building.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide 5 micro sec delay after power change to analog comparator to
get it stable. If delay is not given, we observed some instability and
it generates random interrupt.
Jira: ZEP-1438/ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Change reference voltage for Analog comparator to Internal reference
voltage.
Currently AIO is using External reference voltage (Reference A) and
external reference is set at 3.3V. In this usecase both reference
Voltage and AIO IP are set at 3.3V. So rising edge interrupt behaviour
will be unpredictable.
So by changing internal reference voltage to Internal (set at 1.09V)
interrupt will be generated as soon as Voltage on I/P will exceed it.
Jira: ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
AIO should be supported on more platforms. Adapt
this case to make it run on more platforms.
Also keep reference voltage for comprator as internal.
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Add instructions to build the DTC from Windows, note that the following
2 caveats apply:
* The flex version needs to be pinned to 2.6.0 because of a bug with the
current MSYS2 flex
* The repository to clone DTC from is currently my own on GH while
waiting for a patch to be accepted upstream
Additionally this removes the python2 requirement and adds documentation
on installing pip an pyaml.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It's not obvious which kernel release version you're reading about in the
documentation. Add the version info in the breadcrumb header (instead
of "Home / Docs / Subsystems /" show as
"Home / Docs / 1.8 / Subsystems /").
(Depends on docs-theme PR-9, but can be merged now with no ill-effect)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes sparse warning:
<snip>/zephyr/kernel/sched.c:368:6: warning: symbol '_dump_ready_q' was not declared. Should it be static?
Change-Id: I156e89f1d74178bbd99cc25e532da544c7ebee60
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warnings:
<snip>/zephyr/kernel/timer.c:15:16: warning: symbol '_trace_list_k_timer' was not declared. Should it be static?
<snip>/zephyr/kernel/sem.c:32:14: warning: symbol'_trace_list_k_sem' was not declared. Should it be static?
<snip>/zephyr/kernel/stack.c:24:16: warning: symbol '_trace_list_k_stack' was not declared. Should it be static?
<snip>/zephyr/kernel/queue.c:27:16: warning: symbol '_trace_list_k_queue' was not declared. Should it be static?
<snip>/zephyr/kernel/pipes.c:40:15: warning: symbol '_trace_list_k_pipe' was not declared. Should it be static?
<snip>/zephyr/kernel/mutex.c:46:16: warning: symbol '_trace_list_k_mutex' was not declared. Should it be static?
<snip>/zephyr/kernel/msg_q.c:26:15: warning: symbol '_trace_list_k_msgq' was not declared. Should it be static?
<snip>/zephyr/kernel/mem_slab.c:20:19: warning: symbol '_trace_list_k_mem_slab' was not declared. Should it be static?
<snip>/zephyr/kernel/mailbox.c:53:15: warning: symbol '_trace_list_k_mbox' was not declared. Should it be static?
Change-Id: I42d55aea9855b9c1dd560852ca033c9a19f1ac21
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warning:
<snip>/zephyr/zephyr/misc/printk.c:50:5: warning: symbol '_char_out' was not declared. Should it be static?
Change-Id: I5af0860e9f8f827002ae9a142b5924d3de8d51b6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Fixes sparse warning:
CHECK <snip>/zephyr/kernel/thread.c
<snip>/zephyr/kernel/thread.c:184:20: error: symbol '_thread_entry' redeclared with different type (originally declared at <snip>/zephyr/kernel/include/nano_internal.h:43) - different modifiers
CC kernel/thread.o
Change-Id: I2223493cdf97c811c661773f8fd430e6c00cbaa0
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
The uncompressed source address in packets was not handled properly if
NET_6LO_CONTEXT was enabled.
This implementation is identical to the contextless case.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Now that we can specify what toolchain is intended for each
SOC, enable some more SOCs to be built.
A full sanitycheck run will require the installation of both
RF-2016.4 and RG-2016.4 releases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XTENSA_TOOLS_PATH and XTENSA_BUILDS_PATH have been retired.
XTENSA_SDK is now the base directory for the Xtensa SDK. The build
systems will search for toolchains in there, using
CONFIG_TOOLCHAIN_VARIANT to locate the right one. It defaults to
/opt/xtensa.
XTENSA_BUILD_PATHS is now a list of additional directories to search
for Xtensa CPU builds. By default the build system will already search
the builds included in the SDK; this is intended for vendor-supplied
CPU build definitions.
Some whitespace changes made for readability and comments added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use TOOLCHAIN_VARIANT to indicate what XCC toolchain release
to use.
Set a reasonable default for the RG-2016.4 toolchain release.
D_108mini, D_212GP, D_233L are only in RF-2016.4, set that
appropriately.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we do not receive last ACK when the connection is tore down,
then do not wait forever as that would eat all the resources in
the network stack. So when we enter the LAST_ACK state, we setup
a timer that will unref the connection if the last ACK is not
received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without change to add ACK to FIN, invalid TCP packet is generated,
where ack sequence number is non-zero. Without adjusting sequence
number as done, ACK which we send in response to peer's FIN/ACK is
not recognized by peer, and peer keeps retransmitting its FIN/ACK.
Jira: ZEP-2104
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When connection handler was unregistered, we did not remove
it from cache. This caused invalid connection to be passed to
net_context after connection unregister if connection caching
was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This greatly increases the speed in which test cases are evaluated
on the Xtensa simulator.
The cycle limit parameter was removed, we don't currently need it
since sanitycheck handles killing test cases if they time out.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A non-tickless system with 10ms granularity was occasionally
taking up to 70ms for the cancellation to be propagated back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The commit "net: tcp: Handle retransmitted packets from peer"
introduced over 80 character line that was missed in review.
Fixing it now.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neil Armstrong