All SPI drivers have this same way to handle synchronous call, thus
let's generalize it in struct spi_context, with a relevant API and apply
the change into SPI DW driver.
spi_context API will prove to be useful once asynchronous call will be
handled as well, through the same completion functions used now only for
synchronous call. It will be transparent for the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's improve common SPI driver context by adding a lock and generic
function to get/release it.
It's statically initialized to save a bit of ROM.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This application intents to test an SPI driver by looping over MISO/MOSI
line where the controller will then send data to itself.
It will test various buffer tx/rx schemes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introducing as well a generic driver helper for CS gpio control and
buffer management.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such API improves many aspects of the former API by reducing the number
of function, allowing more buffer flexibility etc... This leads in
better memory usag and performance as well.
However, as this will take sometime to get into use, the former API is
still present and is the one enabled by default.
Jira: ZEP-852
Jira: ZEP-287
Jira: ZEP-1725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
One liners if/for/while statements still need {}
(and line break are cheap for clarity).
Aligning parameters properly.
Also, removing __func__ usage from SYS_LOG_* as these macros already put
it internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Eliminate following errors:
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
Also, usage of CROSS_COMPILE with a predefined toolchain is not required and
complicates things, just call CROSS_COMPILE with the full path if you
want to build with a toolchain not supported with Zephyr.
Change-Id: I93ec4ff2e04d22cee82c8e4b74b652927572b30a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed the old PWM APIs usage and added support for the new PWM API.
JIRA: ZEP-2018
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change moves to a project specific container with the latest SDK
which adds support for xtensa HALs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The data fragments were stored in reversed order when the RX
data was saved into network buffers. This was caused by net_pkt
changes in commit db11fcd "net/net_pkt: Fully separate struct
net_pkt from struct net_buf".
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since MSYS2 provides a UNIX-like environment, treating it as a Windows
build caused issues with the paths.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the PHY update complete event can be generated due to the
procedure being initiated by the peer, use a flag to
differentiate between local auto update initiated on connection
complete versus peer initiated anytime in the connection. This
is necessary to avoid repeated initiation of auto-update
procedures intended only to be issued on connection complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MinGW is old and unsupported, and it does not even download properly
these days. Remove the instructions that rely on MinGW since they are
only confusing for people trying to build on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The STM32L4x SoCs embeds a slightly different embedded flash controller
from the STM32F4x SoCs.
This particular controller has the following properties :
- Up to 2 512KiB banks divided in 2KiB pages
- Flash can be accessed in any sizes
- Flash must be written in 64bit aligned 64bit double-words
The drivers/flash/flash_stm32f4x.c is refactored into a new common
drivers/flash/flash_stm32.c and drivers/flash/flash_stm32l4x.c is
created with the STM32L4x specific functions.
To ease the refactoring and keep common functions, the STM32L4x flash
headers are slightly modified to match the hardware reference naming
and solve compilation issues.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
A typo was present ion the erase and write function were bit were
uncorrectly unset but all other bit except the mask were unset.
The code still worked because the two typos fixed themselves.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Limit visibility of configurable TX pins to SAME70 series only.
Previously visibility of configurable SAME70 TX pins extended
to the full SAM family.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Neither ASF nor CMSIS provide defines that can be processed by
the assembler. Exclude those from soc.h. Before this was done
incorrectly in board.h file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Removed CONFIG_HAS_DTS from the stm32f4_disco_defconfig &
stm32l496g_disco_defconfig files as its automatically selected for all
ARM SoCs at this point.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We now get the baud rate for the serial port from the device tree so we
don't need to be setting it in the defconfig.
The baud rate changed from 38400 to 115200 when we introduced the device
tree for MPS2. The default baud rate was based on matching mbed, but we
use 115200 to match the standard default we have for most boards now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch converts Atmel sam3x MCU series to use register
header files from Atmel Software Framework (ASF) library.
By using ASF different Atmel SAM MCU series can use common
device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This patch adds support for remaining Atmel SAM MCU series,
like sam3x to the common GPIO driver. After this update
full SAM MCU family should be supported by the driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit rework stm32f4 series dtsi files hierarchy.
stm32f4.dtsi was used as maximum common set of IP while it should
be considered as the minimum common subset.
Then, following on stm32f4 series hierarchy and inheritance rules,
stm32f4xxx.dtsi files are reworked to include the "parent" soc dtsi
file and then add own IPs to each SoC.
Change-Id: I394278c84a8ea38921f9f143f4fc52ef1c645d05
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In stm32 dtsi linux files, uart generic node name is serial.
Rename uart node names of stm32 dtsi files from uart@ to serial@
Change-Id: Iac5cbf7955f23cee520bc1790b0f324a17bfcf9e
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit fixes uart only nodes situation for stm32 devices.
st,stm32-uart yaml description is added to enable compilation
Change-Id: Iea78693bdfb90fbb09612b75685ed7ca0ccca6d6
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add configuration, dtsi and memory configuration fixup for the
STM32F469XI High Performance SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The chosen property that sets which serial port is being used for the
console device wasn't set. Add the property "zephyr,console" to the
Arduino Due, CC3200-LaunchXL, CC3220SF-LaunchXL, and QEMU Cortex M3
boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that NXP boards support 'make flash' and 'make debug' via pyOCD and
Segger J-Link, update all the NXP board docs accordingly. Adds a new
generalized OpenSDA document so certain details don't have to be
repeated for every OpenSDA board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we can utilize label in the device tree we can convert to
getting the device name for the Atmel SAM3 UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the TI Stellaris UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the TI CC32xx UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the ARM CMSDK APB UART out of the device
tree instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the NXP Kinetis UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the NRF UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can utilize label in the device tree we can convert to
getting the device name for the STM32 UART out of the device tree
instead of from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add optional label property to be generated as part of the UART yaml
spec. This lets us use the label string in a device tree to generate
the device name (for example CONFIG_UART_STM32_PORT_1_NAME).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the value of the property is a string quote it on output. This lets
us use things like label properties that will have values of strings.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The stm32f4discovery was incorrectly named and should have been
stm32f4_disco. Also added 96b_carbon_nrf51 that was missing from the
list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add configuration, pinmux, dts and documentation for the STM32L496G
Discovery board based on the STM32L496AG SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tomasz Bursztyka