Add npcm miscellaneous device control and power and clock control
instances.
Add device tree bindings for npcm power and clock control.
Signed-off-by: Alan Yang <tyang1@nuvoton.com>
Add npcm clock control driver.
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Alan Yang <tyang1@nuvoton.com>
Add initial support of the mailbox driver based
on the inter VM shared memory mechanism similar
as the existing IPM driver.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Gives an example where the timeout value is 15seconds,
the prescaler of 8 can let the LPTIM count from 0 to 16 seconds
with LSE
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this change, the LPTIM counter will be able to set
its timeout to the st,timeout value. So that system can
sleep for that period without interruption.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Filters already only allow arm and native, so exclude everything else
very early and reduce churn and build time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filters already only allow arm and native, so exclude everything else
very early and reduce churn and build time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace the enum for load modes for the iCE40 with a boolean flag,
as there are only two options:
- SPI: default, which should be used whenever possible
- GPIO bitbang: workarorund, in case a low-end microcontroller is used
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Flags added allow keeping a pin as input/output by not disabling
the output buffer when configuring it as an input and by not
disabling input enable when configuring it as output. This can
be useful to implement signal diagnosis or for testing purposes.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Added empty fp register structs for ARM combinations not handled,
i.e. any ARM without a fpu.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
This commit adds the bt_hci_driver.close function for Ambiq
Apollo3x SoC. Also update the hal_ambiq revision including
the necessary support.
Signed-off-by: Aaron Ye <aye@ambiq.com>
If a gateway is not set for a interface,
also log the destination address.
Also print the interface index instead of the
interface pointer.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Log the address and the err/reason values in the connected
and disconnect callbacks.
Since these values are not part of the BTP events it is
difficult to follow the order and reason why disconnects
happen when debugging.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sample had a few off-by-ones in the code, which caused access
to invalid data.
Fixed by setting the right buffer sizes and the right AD length
fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When CONFIG_LLEXT_STORAGE_WRITABLE is selected and .pre_located is
set, the BSS section is allocated by the user too, no need to
allocate it internally.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves rwlocks into a singular
testsuite at tests/posix/rwlocks app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves semaphore into a singular
testsuite at tests/posix/semaphores app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
RX FIFO flushing on RXTO event should only be performed when
UARTE peripheral might be disable during inactivity and that
happens when low power modes is enabled or when device runtime
PM is used. Flushing was incrementing flush_cnt which was not
used (flushed data is not copied to the next buffer) which
was causing data loss and invalid RX data length reporting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Switch from using direct `strtol` calls to `shell_strtol`.
This change leverages the extensive error handling provided
by `shell_strtol`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Since the `fb` pointer is always assigned to `char_fb`, there is no need
for a `NULL` check. Additionally, removed setting `fb->buf` to `NULL` in
`cfb_framebuffer_init` as it will be overwritten by subsequent operations.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Added `len` to store the result of `strlen(str)` to avoid
multiple calls to `strlen` in the `for-loop`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves confstr, sysconf and uname into
a singular testsuite at tests/posix/single_process app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Fix k_sleep implementation for no multi-threading mode.
Absolute value of timeout expiration was fed to the k_busy_wait()
function instead of delta value. That caused bug like incrementing of
sleep time in geometric progression (while actual function argument is
constant) during program running.
Signed-off-by: Mikhail Kushnerov <m.kushnerov@yadro.com>
In order to compile with C++ exception handling for xtensa, the libgcc
location needs to be known. This change uses the same logic from gcc's
target.cmake to query the compiler for libgcc location and add the lib
to the include list.
Signed-off-by: Mark Inderhees <markind@meta.com>
Due to addition of busy threads running on other cores, and
the simulator runs in single thread bouncing through all cores,
we are wasting quite a bit of time just busy waiting. This makes
each simulator run too long for CI. So limit CPU number to 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The sched benchmark is designed for systems with a single
CPU. Otherwise, the timestamps would be wrong when the partner
thread is scheduled on another CPU, i.e. negative values:
```
unpend 63 ready 62 switch -16562 pend 18937 tot 2500 (avg 928)
```
When the system allows for multiple CPUs, spawn a non-preemptible
thread to keep the other CPUs busy.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Adjust default number of test samples which is based on SRAM size.
Test is using 8*TIMER_TEST_SAMPLES and with previous defaults for
the device with 64k RAM it was using 56k of test data leaving only
8k RAM and that was easily not enough. Adjust conditions to
take less samples when SRAM_SIZE is equal to the threshold.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
From some reason, STM32 I2C drivers selected the compilation of
C files of the I2C LL API.
This is actually not required, so remove this dependency.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add conversion macros from milliseconds to various units.
The purpose of these macros is to make it more clear/easier
for users to set and read values using milliseconds rather
than the various BT units which may be in 0.625, 1.25 or 10ms
units.
This is especially useful when comparing related values using
different units, such as advertising interval (0.625ms units)
and periodic advertising interval units (1.25ms units).
Users will have to be aware that these macros can provide slightly
different values than what is provided, if the provided values
do not match the units.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Include in the list of supported peripherals the UARTE for the
simulated nrf5340
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The HW models now support this peripheral for these targets.
Let's enable them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Alan Yang