To support checking for sorted blocks of multi-line text add
an optional regex pattern for the KeepSorted compliance check.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Openocd target cyw20829 does not define _TARGETNAME which is used by
default by the openocd west runner when using CONFIG_DEBUG_THREAD_INFO.
This is similar to the issue previously addressed for STM32H7:
Link: https://github.com/zephyrproject-rtos/zephyr/issues/45778
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Web browsers don't support HTTP Upgrade mechanism to upgrade to HTTP2.
Instead, HTTP2 is supported only over TLS, and ALPN is used to negotiate
the protocol to be used.
This commit adds the supported HTTP protocols to the ALPN list, so that
web browsers can use HTTP2 with the server.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add a cmake file which uses the cmake options feature
and include it inot the sca.cmake file to set up and describe
the options for the ECLAIR tool.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add the ECLAIR calls for the zephyr cmake environment to call
ECLAIR while the firmware is build by replacing the actual compiler
call and setup the eclair environment and call the compiler through
the eclair.
The Integration accepts a kconfig file for configuring the
analysis and the generation of the reports. The path of the
kconfig file should be provided via the variable ECLAIR_CONFIG.
db_generation.ecl has be created and introduced instead of
reports.ecl because the report generation is handled by the
sca.cmake directly.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add the Eclair configuration files, which are needed to
configure the static code analysis tool for the zephyr
coding guidelines.
Signed-off-by: Simon Hein <Shein@baumer.com>
Add MAX78002EVKIT board.
For more information about this board please check
https://www.analog.com/
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
MAX78002 SoC has IPLL and EBO clocks. Added these clocks for MAX78002.
Updated ERFO clock with '_OR' option because MAX78002 doesn't have it.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Without this change, `get_maintainer.py path ...` did not return a SiM3U
specific maintainer information when querying for
include/zephyr/dt-bindings/pinctrl/si32-pinctrl.h.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nRF54H20 Development Kit version 0.8.0 is no longer supported, given
that they should have all been replaced by 0.9.x.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it possible to enable Wake-up End Device feature with
CSL receiver disabled (to receive wake-up frames on MED).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add Kconfig option `OPENTHREAD_WAKEUP_COORDINATOR` to enable
the Wake-up Coordinator role. Implement API to set Coordinated
Sampled Transmitting sample time and period for a driver that supports
`IEE802154_OPENTHREAD_HW_CST` capability.
The feature is be enabled on with ieee802154_nrf5 driver with option
by setting default value of CONFIG_IEEE802154_NRF5_CST_ENDPOINT.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new Kconfig option `IEEE802154_NRF5_CST_ENDPOINT` is added.
When it is enabled, then capability `IEE802154_OPENTHREAD_HW_CST`
is supported by the ieee802154_nrf5 driver and allows to set the
CST period and CST expected transmission time point.
This feature is an OpenThread-specific extention to the
ieee802154_nrf5 driver.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new capability `IEEE802154_OPENTHREAD_HW_CST` is added.
The option MAY be implemented as an extension to IEEE 802.15.4
drivers allowing to inject CST related Information Elements.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
To ensure payloads are delivered in time for the first subevent
in framed BIS, ISOAL now enforces a (configurable) margin of
the calculated time offset
Without this margin, it has been observed that a broadcaster
can end up consistently missing the first subevent in every third
event in a 7.5 ms ISO with a 10 ms SDU interval
The margin is a conservative 2 ms by default, but can likely be
set a lot lower for most implementations and HWs
Signed-off-by: Troels Nilsson <trnn@demant.com>
Adds compiler flag(s) and some architecture-specific relocations
for ARC. No userspace support, doesn't support all relocations.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Common RTC counter driver for MAX32xxx MCUs.
Time of day alarm is used to generate interrupt.
The resolution of time of day interrupt is 1Hz.
Subsecond alarm interrupt not works it does not meet
zephyr counter driver requirement, so that not used.
To use as wakeup source wakeup-source parameter shall be
defined as below
&rtc_counter {
status = "okay";
wakeup-source;
};
Co-authored-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Added pmod_serial and pmod_header node labels to EK-RA8M1 device
tree board definition, allowing compatible shield boards to be used.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Fixes: #78010
This commit adds the "Gateway Advertisement and Discovery" process
to the MQTT-SN Publisher Sample application.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
Fixes: #78010
This commit adds tests for the "Gateway Advertisement and Discovery"
process. This includes tests for handling SEARCHGW, GWINFO, and ADVERTISE
as well as manually adding a Gateway for use. Gateway pruning when
missing ADVERTISE messages is also tested.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
Fixes: #78010
This commit implements the "Gateway Advertisement and Discovery" process
defined in section 6.1 of the MQTT-SN specification.
This includes breaking changes to the transport interface and the default
included UDP interface implementation as support for UDP multicast
messages is added as implemented by the Paho MQTT-SN Gateway.
Signed-off-by: Kenneth Witham <kennywitham4@gmail.com>
This follows update of UTCPD.VBSCALE register field. It supports:
- "divide-20": External VBUS voltage divider circuit should be 1/20
for EPR application. The divided voltage compares with
200mV to set or clean VBUS Present bit.
- "divide-10": External VBUS voltage divider circuit should be 1/10
for SPR application. The divided voltage compares with
400mV to set or clean VBUS Present bit.
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Nordic SoCs implement an event system, for which the system can
optimize for low latency/high power or low power.
Add soc level implementation of reference counted API which will
optimize for low latency if any part of the system requires it.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a driver for the MB85RSM1T FRAM chip.
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The HAL configuration binding can be done dynamically based on the
IP's address space. The `hal-cfg-index` property is more tied to
software rather than hardware so remove it as an attempt to clean
up the binding.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add USB node to apollo4p and apollo4p_blue qualifier, and apollo4p_evb
and apollo4p_blue_kxr_evb board to enableUSB support on the MCU and
its EVB.
Signed-off-by: Chew Zeh Yang <zeon.chew@ambiq.com>
These samples demonstrate how to use the bluetooth 6.0 channel
sounding APIs. A basic distance estimation algorithm is included.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Before that fix the names for UDMA could be misleading.
With that fix the namespace is clear and easy to follow.
Same applies for peripheral addresses and pad config.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
Pieter De Gendt