90c6d71503
Update some comments.
2018-03-16 09:34:09 -06:00
cdca265965
Refresh some configurations and adapt to recent changes to apps/examples/nsh.
2018-03-16 08:52:46 -06:00
8f914ef9ca
libc/lzf/Kconfig: Remove some kruft left in the file.
2018-03-15 17:29:12 -06:00
f0ad45ee27
fs/mmap: Fixed compiler warning about access to uninitialized variable in rammap(...)
2018-03-15 14:44:34 -06:00
eb4539c305
libc/lzf: Update Kconfig comments
2018-03-15 14:21:07 -06:00
5fc6178201
libc/lzf: Another trivial coding standard fix.
2018-03-15 10:47:00 -06:00
43ba19025d
Update some function headers.
2018-03-15 09:19:26 -06:00
0ab037e6b4
libc/lzf: lzf_compress() now expects the hash table as user allocated input parmeter rather than declaring the huge array on the stack.
2018-03-15 08:51:32 -06:00
9acfbd2163
libc/lzf: Make HLOG configurable
...
(cherry picked from commit ea77dfafe1afe7d399e47871d2ec81fea99626cc)
2018-03-15 08:32:24 -06:00
d3cf5de5f4
libc/lzf: Fix an error introduced in coding standard conversion.
...
(cherry picked from commit 8879116fe85558520c4811dc4ab780b28e66810d)
2018-03-15 08:32:04 -06:00
573887d4ee
Trivial correction to a typo in a comment.
2018-03-15 07:36:57 -06:00
25eb417c12
libc/lzf: Add Marc Alexander Lehmann's LIBLZF3.6 librrary
2018-03-14 14:48:53 -06:00
9c1efc7ab9
drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.
2018-03-14 10:33:27 -06:00
4a21c64f68
Update a README
2018-03-14 09:31:07 -06:00
06e7533bb0
Update some comments.
2018-03-14 08:17:50 -06:00
5f0af167df
Trivial fix of two typos
2018-03-13 16:39:36 -06:00
149f3bd471
Standardization of some function headers.
2018-03-13 09:56:16 -06:00
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
c268288c17
drivers/sensors: Add support for Sensirion SHT2x humidity sensor
2018-03-13 08:26:15 -06:00
1a990f99d1
libc/time: Add an implementationof clock()
2018-03-13 08:07:29 -06:00
f62bfca94e
Merged in spiriou/nuttx/stm32_lowputc (pull request #613 )
...
arch/arm/src/stm32/lowputc: fix uart glitch when lowputc is enabled
Calling up_lowputc() when a character is in the shift register results
in corrupted character on stm32f1xx and stm32f205 cores.
TC status bit ensures that up_lowputc() waits for an on-going
transmission to complete before writing in TDR.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-12 22:01:00 +00:00
a5e1553022
Correct a link in the top-level README.txt file. Noted by David Drinn
2018-03-12 15:58:57 -06:00
d340ff8f62
Merged in spiriou/nuttx/stm32f103minimum_dfu (pull request #612 )
...
stm32f103-minimum: add support for DFU bootloader
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-12 21:55:06 +00:00
ae399b9b62
net/tcp: In tcp_input(), add the logic to detect, decode, and respond to TCP Keep-Alive packets. In tcp_timer(), fix some problems with the way that TCP Keep-Alive probes were being formatted.
2018-03-12 15:54:45 -06:00
1f52c13814
Merged in spiriou/nuttx/stm32_usbdev_hid (pull request #611 )
...
arch/arm/src/stm32/usb: skip recipient check for descriptor related requests
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-12 20:08:55 +00:00
e6e7dae05b
sched/clock: Fix a recently introduced name collision
2018-03-12 13:36:06 -06:00
251924a734
Squashed commit of the following:
...
net/tcp: Add logic to send probes when SO_KEEPALIVE is enabled.
net/tcp: TCP socket should not have to be connected to configure KeepAlive.
net/: Add a separate configuration to enable/disable KEEPALIVE socket options.
net/tcp: Arguments to TCP keep-alive timing functions probably should be struct timeval as are the times for other time-related socket options.
net/tcp: Fix a backward conditional
net/tcp: Add some more checks and debug output to TCP-protocol socket options.
net/tcp: Cosmetic changes to some alignment.
net/: Adds socket options needed to manage TCP-keepalive and TCP state machine logic to detect if that the remote peer is alive. Still missing the timer poll logic to send the keep-alive probes and the state machine logic to respond to probes.
2018-03-12 10:59:46 -06:00
0885ad7b14
drivrs/leds: Userled driver was using LCD debug output instead of LED debug output.
2018-03-11 17:43:04 -06:00
f346bb0e88
drivers/lcd/ft80x: Fix a typo that caused the driver to fail to recognize the ft801 chip version. Also update an unrelated README file.
2018-03-11 09:45:47 -06:00
73c107e1fb
Squashed commit of the following:
...
drviers/lcd/ft80x: No longer depends on CONFIG_EXPERIMENTAL
Update README.txt
2018-03-10 10:15:32 -06:00
399b9860af
Squashed commit of the following:
...
drivers/lcd/ft80x: ACTIVE host command appears to be formatted differently than other host commands; Fix ROM CHIPID. Appears to be big-ending, BCD.
drivers/lcd/ft80x: Fix some compile issues when debug features are enabled.
2018-03-09 12:32:59 -06:00
ed50b14cee
drivers/net/phy_notify.c: Use phy debug macros instead of net debug macros. ninfo() and nerr() are used a bit too much, so the console output is difficult to read with network debug.
2018-03-09 07:11:07 -06:00
82baae5101
Makefile.unix: This seems to eliminate the spuriouis errors reported by 'make savedefconfig'
2018-03-07 13:37:53 -06:00
8b57b7771f
arch/srm/src/stm32f7: add PM hooks to ADC, I2C and SPI.
2018-03-06 08:10:50 -06:00
d8311b6493
drivers/power: add pm_unregister
2018-03-06 07:59:17 -06:00
0b277da5fa
arch/arm/src.stm32/Kconfig: Reduce redundancy in STM32F401 config settings.
2018-03-05 18:40:45 -06:00
ab5244e855
arch/arm/src/stm32: While we are at it and the differences are fresh in mind, add support for the rest of the STM32F401 family.
2018-03-05 17:36:08 -06:00
33adf2c64d
arch/arm/src/stm32: Add support for the STM32F401xB and STM32F401xC families.
2018-03-05 13:45:01 -06:00
cb31a37c69
Cosmetic changes from review of last PR.
2018-03-05 10:22:22 -06:00
4d78593a0f
Merged in ordsen/nuttx/feature-pca9540bdp-i2cmultiplexer (pull request #610 )
...
Feature pca9540bdp i2cmultiplexer
* Implement common i2c multiplexer abstraction to be reused by i2c multiplexer devices. Provide common interface with transfer and reset calls to set up virtual i2c busses.
* Remove i2cmux_lower_half.c and headers, will be implemented by each mux driver
* Implement PCA9540BDP I2C multiplexer lower half which uses the common i2c mux abstraction
* Remove application interface and implement common i2c functions
* Remove application interface from pca driver and implement common i2c functions directly in the pca driver
* Use i2cerr
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-05 16:11:05 +00:00
628821fdf4
arch/srm/src/stm32f7: Add CONFIG_RTC_PERIODIC support. Also makes the RTC lowerhalf more like in STM32L4.
2018-03-05 07:46:58 -06:00
de6b13b3ab
Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.
2018-03-04 08:07:07 -06:00
8cd80e2d47
Update TODO list
2018-03-04 07:30:50 -06:00
6c729d6a7b
Trivial, cosmetic change from review of last PR
2018-03-04 06:51:37 -06:00
f745b4404a
Merged in raiden00/nuttx (pull request #609 )
...
stm32_hrtim: fix capture_get function, add software capture trigger, add software reset trigger, add outputs polarisation configuration
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-04 11:33:45 +00:00
15dc86ddbb
stm32_hrtim: fix capture_get function, add software capture trigger, add software reset trigger, add outputs polarisation configuration
2018-03-04 12:28:26 +01:00
987a8298f2
Fix some errors found in build testing + clean-up some issues with last changes to remove use of printf() from within the OS.
2018-03-03 15:51:27 -06:00
b4f2b0dfc6
Remove all usage of printf() from the OS. That is not an acceptable context for the use of an application-oriented interface that depends on a task-specific file descriptor and C buffered I/O.
2018-03-03 15:20:21 -06:00
d1b31d536a
Eliminate a couple more uses of printf() within the OS. There are several more.
2018-03-03 12:59:48 -06:00
de0ef2486f
Some days I can't do anything right.
2018-03-03 11:39:58 -06:00
Gregory Nutt