This patch introduce struct usb_devpath to indentify uniquely an USB
device, which is basic element for multiple hub support.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previous design use bus and port(root hub port) for the identification
to the native USB device. It cannot work properly under the multi-hub
situation due to external USB hub is introduced.
This patch removes old hub implementation code, and subsequent patches
will be add support for mutiple hubs.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
As function sscanf is banned, to get value from parameter buffer,strto*
is recommended. To reduce the inspection code when using strto*, it's
better to use a string convert API.
Usage:
For virtio-blk, it has parameters:
range=<start lba>/<subfile size>
sscanf:
if (sscanf(cp, "range=%ld/%ld", &sub_file_start_lba,
&sub_file_size) == 2)
sub_file_assign = 1;
string API:
if (strsep(&cp, "=") &&
!dm_strtol(cp, &cp, 10, &sub_file_start_lba) &&
*cp == '/' &&
!dm_strtol(cp + 1, &cp, 10, &sub_file_size))
sub_file_assign = 1;
Tracked-on: #1496
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch addes the debugexit function to DM. If it's enabled
by DM cmdline (by add --debugexit), the guest could write a
32bit value to port 0xF4 to trigger guest shutdown.
Tracked-on: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds a simple 32bit static elf binary loader to acrn DM.
And if the elf binary follow multiboot protocol, only memory info
will be included in multiboot info.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We will use timerfd and epoll mechanism to emulate kinds of timers like
PIT/RTC/WDT/PMTIMER/... in device model under Linux. The api is unified
in this patch.
Compare with sigevent mechanism, timerfd has a advantage that it could
avoid race condition on resource accessing in the async sigev thread.
change log:
v1 -> v2: add NULL pointer check for function parameter;
v2 -> v3: rename file name of vtimer.* to timer.*;
rename structure name of vtimer to acrn_timer;
add read() in timer handler to consume I/O event;
v3 -> v4: replace bool clock_realtime with int clockid;
close acrn_timer->fd properly;
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add ioctl parameter and API to set vcpu regs. The guest software
loader will call this API to set guest vcpu registers.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Added edge triggered read and write events.
For mei mediator we need to detect changes in
sysfs files, it's not possible to do it via
level based triggers as the files are always
readable.
Tracked-On: #1417
Change-Id: Ib360ad31f30afa576b2b7b833f9bb139c269a030
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The vmname variable is missing 'export',
so it's probably only shadowing the already
exported variable from devicemodel/include/dm.h
Tracked-On: #1415
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
An inline function defined in headers must be static
otherwise compilation may fail, depending on gcc optimization level,
particularly if dropping -O2 from the Makefile dm doesn't
compile reporting unresolved symbols.
Tracked-On: #1406
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to PCI spec 3.0 section 6.2.2 "Device Control", guest
could write the command register to control device response to
io/mem access.
The origial code register/unregister the memory range which is
not suitable because it can't handle the sequence:
1. disble the device response to specific memory range
2. reboot guest (DM will try to free the memory range which
was freed in step 1 already)
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some firmware (e.g. UEFI) uses RTC CMOS to fetch the system's memory
configuration. Put lowmem / highmem info in the designated area.
This is a port of Bhyve vRTC's user-space logic.
v1 -> v2:
* move KB/MB/GB to macros.h
* move nvram offset definitions to rtc.h
Tracked-On: #1390
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch depends on a vhm patch merged, "vhm: setup ioreq shared buf
in IC_CREATE_VM ioctl". We intend to combine VM creating and ioreq
shared page setup into one step. For compatibility issue, we need follow
the patch dependency to merge accordingly.
This patch also drops vm_open/vm_close which will be intergrated into
vm_create/vm_destroy.
Tracked-On: #1330
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ioeventfd and irqfd support for vhm was introduced in kernel vhm module.
We provide the interfaces of them for DM users.
Tracked-On: #1329
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is for "interrupt storm mitigation", used to reduce
the effect on SOS if an "interrupt storm" happens in UOS.
Add a monitor thread to get UOS pass-through devices interrupt
freqency data; currently, if "interrupt storm" happens, it'll
send a command to delay interrupt injection to UOS for some time.
The parameters: interrupt storm threshold and delay time can be
adjusted according differt HW configure and use case.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Flat Mode for hub emulation means DM emulates USB devices under hub but
hide hub itself. Under this design the Guest OS cannot see any emulated
hub. So in the perspective of Guest OS, all the emulated devices are
under root hub.
This patch is used to enable feature as mentioned above. And please NOTE,
it is the initial version of hub flat Mode hub emulation, there are one
limitation: only one physical hub is supported. If second physical hub is
connected, the connect and disconnect behavior in second hub may affect
the function of first emulated hub.
The USB HUB device model should be the final long term solution, but it is
very complex. Use flat mode HUB emulation as the short term solution first
to support some USB touch devices which integrated internal HUB.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1243
This patch implements RTC feature that UOS can set RTC wakeup timer
to IOC firmware with a specific time before enter S3/S5. IOC mediator
also needs to indicate RTC wakeup reason to UOS after exit S3/S5.
Tracked-On: #1213
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Unmap ptdev BAR when deinit to comply with native system, who zap out
all pre-allocated BARs.
Tracked-On: #1146
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The whole vmctx will be cleared during cold reset.
cmos data should not be cleared during cold reset.
Move cmos data out of vmctx.
Tracked-On: #1118
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
CMOS offset from 0x20 to 0x9F is used to store rpmb key information.
vsbl loader will init vrpmb key in CMOS when boot/reboot.
vsbl loader will not init vrpmb key during S3 resume.
vsbl will read vrpmb key via CMOS interface.
After reading, the key value is cleared in CMOS. So the key can only be
read once until next boot.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Currently the maximum number of bus and port for xHCI are
both set to 255, it is theoretically possible but in fact
not neccessary. This patch changes those two values to be
more proper: 4 buses and 20 ports.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current design cannot get physical USB device information without
the creation of pci_xhci_dev_emu. This brings some difficulties in
certain situations, hence struct usb_native_devinfo is introduced
to describe neccessary information to solve this trouble.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. support "writeback" and "writethru" mode toggling for virtio-blk
conditionally. When starting DM with "writethru" parameter in
virtio-blk, guest OS could not toggle cache mode. When starting DM
with "writeback" parameter in virtio-blk, guest OS could toggle
cache mode.
------------------------------
DM cmdline | toggle support
------------+-----------------
writeback | yes
writethru | no
------------------------------
2. To toggle cache mode, run below command in guest OS:
echo "write back" > /sys/devices/xxx/vdx/cache_type
OR
echo "write through" > /sys/devices/xxx/vdx/cache_type
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is the counterpart in DM to the VHM request state update in the
hypervisor. Major changes include:
* Remove accesses to the obsolete 'valid' member.
* Access the 'processed' member using atomic operations.
* Sync the documentation on vhm_request.
In addition, the new state transition also requires a VHM request to be always
handled properly, as there is no 'FAILED' state any more. Instead of crashing
the device model (and thus the UOS as well), the device model should return all
1s or ignore the request when it is to load from or store to an invalid address,
respectively.
Note: there is an issue in vm_system_reset() and vm_suspend_resume() where
completed VHM requests are not properly notified, causing the hypervisor to
complain as it sees uncompleted requests while trying to create a new one. This
issue will be resolved in a separate patch.
v1 -> v2:
* Use macro-defined constants for the default values for invalid PIO/MMIO
reads.
* Change the return type of vmexit_handler_t in DM to void as the return
values are no longer necessary.
* Remove VM_EXITCODE that are no longer used.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduces wrappers to the built-in atomic operations provided by
gcc.
There are two sets of built-in atomic functions available. Before gcc 4.7.0 only
the __sync built-in functions are available, while since 4.7.0 a new set of
built-in functions with the __atomic prefix is introduced as a
replacement. Since the __sync functions will eventually be deprecated, the
__atomic ones are preferred whenever available.
The interfaces provided are listed below, mostly following the naming of the
underlying built-in functions which explain themselves.
atomic_load
atomic_store
atomic_xchg
atomic_cmpxchg
atomic_add_fetch
atomic_sub_fetch
atomic_and_fetch
atomic_xor_fetch
atomic_or_fetch
atomic_nand_fetch
atomic_fetch_add
atomic_fetch_sub
atomic_fetch_and
atomic_fetch_xor
atomic_fetch_or
atomic_fetch_nand
atomic_test_and_set
atomic_clear
atomic_thread_fence
atomic_signal_fence
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to ACPI spec, when system back to working mode from
S3, WAK_STS bit (15) should be set.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When guest enter/exit S3, we need to do
1. stop watchdog timer when guest enter S3 to avoid watchdog
timer reset guest when guest is in S3 state.
2. reset watchdog timer when guest exit from S3.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Then, acrnctl could send command to monitor module of DM and call
functions defined in pm ops. One example is: acrnctl resume UOS
after UOS enter S3.
Also add general pm.c and move pm related function to this file.
Signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds new signals about parking brake and Hvac in the signal
definition and signal whitelist.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch resolves IOC mediator deinit function is blocked due to IOC mediator
core thread enters into sleep by epoll_wait, then pthread_join cannot return.
Trigger an event to wakeup core thread when IOC mediator deinit is invoked.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
fix all assign.c integer violations except related
"Implicit conversion: actual to formal param".
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ring buffer processing logic assumes every transaction
will be submited to physical device before next transaction
coming. So it use two states 0 (free) and 1 (used) to represent
the state of every data block in the ring buffer. With the help
of the two state, the ring buffer could accept and process data
normally.
But this logic is not proper for ISOC transfer, which generally
submits many transactions even none of them arrive the physical
device. So this patch uses three values to represent the state
of data block in the ring buffer:
USB_XFER_BLK_FREE: this block could be filled with new data;
USB_XFER_BLK_HANDLING: this block is submited to physical device
but response from device is still not received;
USB_XFER_BLK_HANDLED: this block has been processed by physical
device.
The new logic will do different things for each state, which will
make the ISOC transfer work successfully.
Change-Id: I5559cae24c739633289742d64dd51751797b81a7
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to add support for USB 3.0 devices. Currently
USB 3.0 disk is supported and tested successfully.
Change-Id: I3fbfbe9c28bc4b14af0417104f8fa822f9758908
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
While fixing the MISRA C violations related to integral types, we have unified
the type of the following data:
uint8_t:
phys_pin, virt_pin, vpic_pin, ioapic_pin, vioapic_pin
uint16_t:
vm_id, pcpu_id, vcpu_id, vpid
uint32_t:
vector, irq
This patch revisits the types of the fields in vhm_request as well as the
structures used as parameters in the hypercalls, and make them aligned with the
types the hypervisor uses for such data. Reserved fields are added to keep the
size and layout of the structures. Implicit paddings are also made explicit as
reserved fields.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This function add high level reset_vdev function. Which is
implemented to call deinit/init pairing to emulate the virtual
device reset operation.
This patch also add the system reset which keep the UOS RAM
content functionality to DM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Guest has erquirement to support system/full reboot and S3. Which could
trigger different reset path in guest
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
GUEST_CFG_OFFSET is used to pass the memory top info from DM
to HV. The address should be in E820 reserved range to prevent
guest use it for other purpose.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There has one new DRD driver followed usb role framework which is just
upstreamed to Linux community. This patch updates the xHCI DM to be
compatible with it. DM DRD code follows DRD spec to implement and make
it more reasonable.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For dedicated xHCI extended capability, it need set corresponding PCI VID/PID.
This patch sets the Intel Apollo Lake platform PCI VID/PID for DRD
capability which will be checked for enabling DRD fucntion in new DRD
driver. Besides, this patch refines the PCI VID/PID related code.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current register names in instr_emul are misleading since the register names
are not VM-specific. Rename VM_REG(_GUEST) to CPU_REG in both the hypervisor and
device model.
v1 -> v2:
* Introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- UOS will boot fail if 'strictio' is enabled ('-e' option), in this
case (with '-e'), device model will block all PIO accesses whose
handlers were not registered, after that, device model program will
exit, hence UOS boot fail.
actually, such kind of accesses exist, e.g. UOS would program
PIT registers (port address: 0x43) if hpet is disabled.
- For debug, we can trap unexpected PIO access in 'default_inout()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Current option of removing vGSI capability is global, which exposes
vIOAPIC link for all ptdev even only one need this. This patch makes
it as ptdev local option to lower the system level impact. To keep
vGSI for MSI capable ptdev, just explicitly append ",keep_gsi" in
option list, like "-s 14,passthru,0/e/0,keep_gsi"
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- hardcode the devices' GSI info based on the platform
- reject the passthrough if the following requirement is not met
all the PCI devices that are sharing the same GSI should be assigned
to same VM to avoid physical GSI sharing between multiple VMs.
v4 -> v5
* Move the gsi_dev_mapping_tables definition in a separate file
* Add the GSI info that might be used by GPIO
* Update the HW name
v3 - > v4
* Refine the format of raw data to improve the readability
* Remove the redundant code when adding the new dev into the gsi
sharing group
v2 -> v3
* Add the MSI/MSI-x capability check
Do not add the device which supports MSI/MSI-x to the GSI sharing
group.
v1 -> v2
* Update the GSI raw data based on SBL
* Free the resources when gsi sharing violation occurs
* Move the MACRO PCI_BDF(b, d, f) to pci_core.h since passthrough.c
and gsi_sharing.c are both using it
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the vcpu id type as uint16_t for vm_create_vcpu, this
keeps alignment with the updates for the structure acrn_create_vcpu
used by hcall_create_vcpu in the hypervisor.
In the device model, the caller is responsible for vcpu id type
conversion; vcpu id type is uint16_t for external interface in the
current implement.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When enabling GPU passthru for guest, stolen memory needs to be
disabled. This change disables stolen memory in passthru mode.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements VM monitor operations including stop/suspend/resume.
For other VM monitor operations(pause/unpause/query), IOC mediator would not
register callbacks for them since there is no requirements from VM Manager.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The Intel Trace Hub (aka. North Peak, NPK) is a trace aggregator for
Software, Firmware, and Hardware. On the virtualization platform, it
can be used to output the traces from SOS/UOS/Hypervisor/FW together
with unified timestamps.
There are 2 software visible MMIO space in the npk pci device. One is
the CSR which maps the configuration registers, and the other is the
STMR which is organized as many Masters, and used to send the traces.
Each Master has a fixed number of Channels, which is 128 on GP. Each
channel occupies 64B, so the offset of each Master is 8K (64B*128).
Here is the detailed layout of STMR:
M=NPK_SW_MSTR_STP (1024 on GP)
+-------------------+
| m[M],c[C-1] |
Base(M,C-1) +-------------------+
| ... |
+-------------------+
| m[M],c[0] |
Base(M,0) +-------------------+
| ... |
+-------------------+
| m[i+1],c[1] |
Base(i+1,1) +-------------------+
| m[i+1],c[0] |
Base(i+1,0) +-------------------+
| ... |
+-------------------+
| m[i],c[1] |
Base(i,1)=SW_BAR+0x40 +-------------------+
| m[i],c[0] | 64B
Base(i,0)=SW_BAR +-------------------+
i=NPK_SW_MSTR_STRT (256 on GP)
CSR and STMR are treated differently in npk virtualization because:
1. CSR configuration should come from just one OS, instead of each OS.
In our case, it should come from SOS.
2. For performance and timing concern, the traces from each OS should
be written to STMR directly.
Based on these, the npk virtualization is implemented in this way:
1. The physical CSR is owned by SOS, and dm/npk emulates a software
one for the UOS, to keep the npk driver on UOS unchanged. Some CSR
initial values are configured to make the UOS npk driver think it
is working on a real npk. The CSR configuration from UOS is ignored
by dm, and it will not bring any side-effect. Because traces are the
only things needed from UOS, the location to send traces to and the
trace format are not affected by the CSR configuration.
2. Part of the physical STMR will be reserved for the SOS, and the
others will be passed through to the UOS, so that the UOS can write
the traces to the MMIO space directly.
A parameter is needed to indicate the offset and size of the Masters
to pass through to the UOS. For example, "-s 0:2,npk,512/256", there
are 256 Masters from #768 (256+512, #256 is the starting Master for
software tracing) passed through to the UOS.
CSR STMR
SOS: +--------------+ +----------------------------------+
| physical CSR | | Reserved for SOS | |
+--------------+ +----------------------------------+
UOS: +--------------+ +---------------+
| sw CSR by dm | | mapped to UOS |
+--------------+ +---------------+
Here is an overall flow about how it works.
1. System boots up, and the npk driver on SOS is loaded.
2. The dm is launched with parameters to enable npk virtualization.
3. The dm/npk sets up a bar for CSR, and some values are initialized
based on the parameters, for example, the total number of Masters for
the UOS.
4. The dm/npk sets up a bar for STMR, and maps part of the physical
STMR to it with an offset, according to the parameters.
5. The UOS boots up, and the native npk driver on the UOS is loaded.
6. Enable the traces from UOS, and the traces are written directly to
STMR, but not output by npk for now.
7. Enable the npk output on SOS, and now the traces are output by npk
to the selected target.
8. If the memory is the selected target, the traces can be retrieved
from memory on SOS, after stopping the traces.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Zhang Di <di.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixes a recent PR #311 that added a new API but the doxygen comments for
one of the parameters didn't match the parameter name.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch implements Intel ApolloLake xHCI extended capabilities. It
includes two dual role switch registers for switching shared
USB2&USB3 phys between xHCI and xDCI.
Change-Id: I2533537d8a4224da3cf9b2e7475aab9f65347a4a
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Every platform should have their own xHCI specific extended
capabilities, but the current xHCI DM is not scalable for them. This
patch refines related logic to make it scalable.
Current code only support 4 registers(4*32) as basic extended
capabilites. Base on this new implementation, the mmio range from
excapoff to regsend will cover real excap size according to the cap
parameter.
Change-Id: Ic55a4494e090ec255939cdb8f32950e3c8a66082
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
monitor_vm_ops and its helpers is added to allow DM to register operations
, so thant vm manager could trigger the power state changes of VM.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Adapt dm-monitor and acrnctl to use the helper functions and new message
definitions in acrn_mngr.h.
These jobs must be done in one commit to avoid build problems:
1. message transmission and callback registration code are moved
to libacrn-mngr.a, so old functions in dm-monitor could be removed to
make code clean;
2. remove unnecessary monior_msg.h;
3. minor changes to acrnctl accordingly.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The VIRTIO_PCI_CAP_PCI_CFG capability creates an alternative access
method to the common configuration, notification, ISR and device-
specific configuration regions.
To access a device region, the driver writes into the capability
structure (ie. within the PCI configuration space) as follows:
- The driver sets the BAR to access by writing to cap.bar
- The driver sets the size of the access by writing 1, 2 or 4 to
cap.length
- The driver sets the offset within the BAR by writing to cap.offset
At that point, pci_cfg_data will provide a window of size cap.length
into the given cap.bar at offset cap.offset.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
pci_emul_find_capability can be used to get the offset of a PCI
capability in PCI configuration space.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
According to the syntax defined in C99, each struct/union field must have an
identifier. This patch removes unnamed struct/union fields that can be easily
expressed in a C99-compatible way.
Here is a summary of structs/unions removed.
struct vhm_request:
union {
uint32_t type; uint32_t type;
int32_t reserved0[16]; => int32_t reserved0[15];
};
struct vhm_request_buffer:
struct vhm_request_buffer {
union { union vhm_request_buffer {
struct vhm_request ...; => struct vhm_request ...;
int8_t reserved[4096]; int8_t reserved[4096];
} }
}
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
With '--ptdev_no_reset', DM doen not abort but warn when assign PCIe
dev without reset capability.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Support log level options, which could change the related log level
without code change.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
eg: -s 8,xhci,1-2,2-2:log=D
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I44639c7b076d21a40eb8f7b99cea8decc5c13c0c
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI de-initialization when the guest
dose shutdown or reboot.
Change-Id: I3dfc1ed1a905b455ef455dff2065e872aa5c1ef8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI port sharing feature, which enable the ability
to assign different native ports to different multi-UOSes. For
example:
1-2,1-2 assigned to UOS-1.
1-1,2-1 assigned to UOS-2.
Change-Id: I899070f7a8a6eb23179e41e7b1f1da24c52482b2
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New USB APIs:
usb_native_is_bus_existed/usb_native_is_port_existed: Check if specific
usb bus or port are valid or not.
usb_native_is_ss_port: Check if the specific port is supper speed usb port.
Change-Id: I9ab54f6e81742321128d6abd5845ef966f0e9f37
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support USB mouse, USB keyboard and USB flash drive by enabling the
USB bulk and interrupt transfer for port mapper.
Change-Id: Ia202729e0cfb26fb44a6b278cf4306f2b0b6fa36
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the control transfer for port mapper. With this
patch, USB2.0 device can be enumerated successfully in user OS.
Change-Id: I567bd00ca310d68375acd94a5cc5bcd287665df1
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the UREQ macro from usb_mouse.c to usb.h
Change-Id: I977cf73291610b0448eb031a500788a397b55f88
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For the purpose of USB port mapper, change struct usb_devemu to
common interface between HCD layer and USB device layer.
Besides, implements ue_init/ue_deinit/ue_info for port mapper.
Change-Id: Id4b7345c7b321b9bdab58139c61169d9229cb6f8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce the struct usb_dev which is used to abstract the physical USB
devices. And APIs for external call are also provided.
Change-Id: Ia25d52a6c670040da787f82b3bea34eee9f3d04d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the DPRINTF macro to UPRINTF for USB subsystem. The
UPRINTF will print log according to certain log level.
Change-Id: I5db8813357c9f684c25f23650e7c914f9063f842
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements INIT, ACTIVE, SUSPENDING and SUSPENDED operations of
IOC mediator lifecycle virtualization.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implements state transfer framework to support IOC lifecycle virtualization.
Four states will be involved in this framework includes INIT, ACTIVE,SUSPENDING and
SUSPENDED.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Separate wakeup reason and hearbeat functions from lifecycle processing since
lifecycle virtualization only contains wakeup reason and heartbeat, the other
functions of lifecycle like boot selector, are not handled by IOC mediator.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Full logic to supprot vRPMB:
1. Automatic switch between physical or simulated RPMB.
But hardcode to use simulated one.
2. Parse RPMB cmd to basic APIs to:
2.1 check request frame HMAC with uos vkey
2.2 replace RPMB frame with real values.
3. RPMB partitioning for multiple UOS.
It's hardcoded for coming config file support.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Create file as simulated RPMB storage for pre-production usage.
Add RPMB APIs to emulate behavior of physical RPMB controllor.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Current only 8 vioapic pins for pci irq (total 24 with 16 reserved),
which easily leads virtual GSI sharing with more and more passthrough
devices. This patch doulbes vioapic pin count and adds reboot hooks to
allocate from same pin after each reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>