Add fixed issues and known issues in release note.
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds support to configure MBA delay values from
scenario xml files just as it is done for CAT mask. This will
improve user experience when configuring RDT resource mask
values.
Tracked-On: #4943
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We hit following build error when using gcc10:
arch/x86/page.c:240:48: error: array subscript is outside
array bounds of 'struct page[0][1]' [-Werror=array-bounds]
It happens with gcc10 on different Linux distributions.
Regarding the case that ACRN depends on zero length array in
sevaral places, we disable the zero length array warning by
gcc option.
Tracked-On: #4810
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Wrap a function to do guest ept flush. This function doesn't do real EPT flush.
It just make the EPT flush request and do the real flush just before vcpu vmenter.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
-- remove unnecessary lock in pci_mmcfg_read_cfg and
pci_mmcfg_write_cfg since the mmio operation is atomic
if the offest is aligned with 1/2/4 bytes.
-- move pci_is_valid_access to pci.h
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
remove spin lock for micro code update since the guest
operating system will take lock
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The commit 'HV: Config Splitlock Detection to be disable' allows
using CONFIG_ENFORCE_TURNOFF_AC to turn off splitlock #AC. If
CONFIG_ENFORCE_TURNOFF_AC is not set, splitlock #AC should be turn on
Tracked-On: #4962
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Lists inside of a note are displayed properly now, thanks to #4966 so
let's put some back in.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix CSS style for lists inside a note. Previously the first list item
would overlap in the note heading box.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Attempt to replace all the variations of "pass-thru", "pass thru", "pass
through", and "pass-through" to be "passthrough" (except for doc labels
and in code or API uses)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Due to there is no inter-vm communication shared memory management
module, so each acrn-dm will call shm_unlink when VM rebooting/shutdown.
It causes one issue that if one of the two VMs is rebooting/shutdown,
the VM can't communicate with the peer again.
Currently, we don't release the shared memory to fix this issue.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Check bit 48 in IA32_VMX_BASIC MSR, if it is 1, return error, as we only
support Intel 64 architecture.
SDM:
Appendix A.1 BASIC VMX INFORMATION
Bit 48 indicates the width of the physical addresses that may be used for the
VMXON region, each VMCS, anddata structures referenced by pointers in a
VMCS (I/O bitmaps, virtual-APIC page, MSR areas for VMX transitions). If
the bit is 0, these addresses are limited to the processor’s
physical-address width.2 If the bit is 1, these addresses are limited to
32 bits. This bit is always 0 for processors that support Intel 64
architecture.
Tracked-On: #4956
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
We always assume the physical platform has XSAVE, and we always enable
XSAVE at the beginning, so, no need to check the OXSAVE in host.
Tracked-On: #4956
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
As build variants for different board and different scenario growing, users
might make mistake on HV binary distributions. Checking board/scenario info
from log would be the fastest way to know whether the binary matches. Also
it would be of benifit to developers for confirming the correct binary they
are debugging.
Tracked-On: #4946
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: refine pci_find_vdev with hash
1. Refined pci_find_vdev with BDF-hashing for better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: refine pci_lookup_drhd_for_pbdf with hash
1. Added an auxiliary function pci_find_pdev using hash to find pdev
with pbdf, thus pci_lookup_drhd_for_pbdf will have a better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: rename pci_pdev_array to pci_pdevs to make it clearer
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hv parameter could be configured in GRUB menu, currently we support
"uart=" parameter to override uart settings.
The patch also has modifications on tutorial of using_grub.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As a UX improvement, use a separate tab when opening links to external
sites (use the same tab for internal links). Also, use rel=noopener
attribute to improve security when linking to external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Run Kata Containers on a Service VM" tutorial to use ACRN v2.0. It
also uses Ubuntu 20.04 as the baseline instead of Ubuntu 18.04. The Kata
Containers installation method is different as there are no pre-built binaries
for Ubuntu 20.04 yet, so using the 'kata-deploy' approach instead which is more
generic.
Changed link to slideshare.net for the referenced TCM presentation.
Tracked-On: #4944
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the table summarizing all ACRN scenario that are defined. The SDC
also offers the opportunity to run a Kata Containers VM and that was missing
from the description.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
New option "vmsix_on_msi,<bar_id>" is added to specify the passthrough
device needs vMSI-X emulation based on MSI capability.
If vMSI-X on MSI emulation is needed, a virtual BAR will be allocated.
Also, fix a logic error on when to setup INTx.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_reserve_irte is added to reserve N coutinuous IRTEs.
N could be 1, 2, 4, 8, 16, or 32.
The reserved IRTEs will not be freed.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
idx_in:
- If the caller of dmar_assign_irte passes a valid IRTE index, it will
be resued;
- If the caller of dmar_assign_irte passes INVALID_IRTE_ID as IRTE index,
the function will allocate a new IRTE.
idx_out:
This paramter return the actual index of IRTE used. The caller need to
check whether the return value is valid or not.
Also this patch adds an internal function alloc_irte.
The function takes count as input paramter to allocate continuous IRTEs.
The count can only be 1, 2, 4, 8, 16 or 32.
This is prepared for multiple MSI vector support.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script only append 'U' for the config of int with a range.
Add a range to MAX_IR_ENTRIES.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
There are three TSN devices on EHL CRB, and each of them need 32
vectors.
In order to support TSN devices, increase msix table size and irte
size.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
David B. Kinder