Add option to disable legacy pairing and only use secure connection.
If legacy pairing was requested pairing will be denied with status
insufficient authenticated
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
IRQ_CONNECT calls in the SiFive GPIO driver were misconfigured when the
conversion to DeviceTree support occurred.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Add sample application for LSM303DLHC, ST MEMS
system-in-package featuring a 3D digital linear
acceleration sensor and a 3D digital magnetic
sensor.
Enable sample to build on stm32f3_disco board
during sanitycheck.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enable LSM303DLHC, ST MEMS system-in-package featuring
a 3D digital linear acceleration sensor and a 3D digital
magnetic sensor, on stm32f3_disco board.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Before entering userspace, the MPU stack guard is
configured to guard the default (i.e. afterwards, the "user")
thread stack, as the privileged stack has not yet been set. Upon
entering userspace the MPU stack guard needs to be re-programmed
to the privileged stack, otherwise, there is a risk that the
first system call might be serviced without privileged stack
protection, if it occurs before any context-switch. This commit
fixes this issue, by calling configure_mpu_stack_guard(..) upon
userspace entering.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Sync peripheral mapping documentation with the Nucleo F429ZI board doc
and add missing information about Ethernet and the button.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Define a SPI baud rate, as well as WS2812_STRIP_ONE_FRAME and
WS2812_STRIP_ZERO_FRAME values, that work for nRF5 devices.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The given defaults were chosen for 96b_carbon, which is an STM32F4X
board that supports the specified WS2812_STRIP_SPI_BAUD_RATE exactly.
Rather than assume the rest of the world works that way, guard the
Kconfig options accordingly.
This is preparation work for adding configuration for other hardware.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
At least on nRF52 devices, we are taking too much time between pixels
dealing with overhead inside the SPI driver transceive calls. This is
leading to dropped frames, because the dead time between frames is
long enough (5000ns+) to look like a reset pulse to the LED strip.
Given this SPI driver limitation, it seems this LED driver's design
decision to rely on SPI peripherals as efficient pulse generators
doesn't work well in practice.
The right way to handle this is probably to switch from SPI to
efficient inline assembly which bit-bangs the pulses with interrupts
disabled.
This is what other efficient libraries do to drive this type of
LED (e.g. FastLED uses C++ templates that expand into such
assembly). The Zephyr GPIO API doesn't support doing that in a
portable fashion, unfortunately.
For now, we'll cheat by pre-allocating enough buffer space to send the
entire strip's worth of data.
This is preposterously inefficient (8x memory overhead since there's
one byte to make a SPI frame for each bit of color), but makes the
driver work correctly.
(Note that using timer peripherals as pulse generators, when combined
with DMA for efficiency, would also lead to similar levels of
overhead.)
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Use the docker image which has BabbleSim precompiled
Fetch the NRF52 hardware models required by the nrf52_bsim board
and compile them.
Collect the coverage report from the nrf52_bsim board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To be able to collect all coverage reports from the "native"
applications in the first CI instance, let's also place the
nrf52_bsim testcases first. The order now is:
unit_testing
native_posix
*_bsim
anything else
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To ensure we can always go back in time, let's explicitly list the
NRF52 HW models version which should be used with each version of
the nrf52_bsim board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a new simulated board, which models the NRF52832 SOC.
Its main use is for workstation testing and simulation of
the BLE stack and any application which relies mostly on it.
It uses BabbleSim (http://Babblesim.github.io) for the radio
simulation.
And the NRF52 HW models hosted in that same GitHub organization:
https://github.com/BabbleSim/ext_NRF52_hw_models
For speed it uses the POSIX arch to (not) emulate the CPU.
It uses Vanilla Zephyr, with a couple of configuration differences:
* It uses (like other POSIX arch boards) the system libC
* It does not use the nrfx hosted by Zehpyr in ext/, but the one
provided by the HW models.
Otherwise it relies in the same drivers as the real NRF52 boards.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Simplify the Kconfig dependency for the nrf timer driver.
CLOCK_CONTROL_NRF5 depends on the SOC_FAMILY_NRF already.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Simulated NRF boards based on the POSIX ARCH cannot directly
use the current SOC_*NRF options as these pull options from
the ARM CPU and other peripherals.
This commit adds a new set of hidden SOC_COMPATIBLE_* options to
be selected both by the real SOCs and the simulated ones.
In this manner we can have the common code depend on the
SOC_COMPATIBLE* options instead of the current ones where
neccessary.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
(f) arm kconfig
posix_flush_stdout() must be provided by any board
using CONFIG_NATIVE_POSIX_CONSOLE, not just by those using
CONFIG_NATIVE_POSIX_STDOUT_CONSOLE
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
These tests rely on compiling with one of the provided
C libraries which are not compiled for any
of the POSIX ARCH boards => balcklist based on the arch
and not on the board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Logging system and shell did not have code owners. Since shell
and logger has been replaced by me and Krzysztof hence I've added
us as a code owners.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fixed condition and wrong Kconfig name, shoud be CONFIG_CPU_HAS_NXP_MPU
instead of only CPU_HAS_NXP_MPU.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ROM consumption is higher with new shell which prevents
quark_se_c1000_devboard from building. Remove that board
from sanitychecker runs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use new shell instead of the legacy one. This commit also fixes
the configuration file mess and allows the program to be run on
more hardware.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were no shell commands implemented so remove the shell
support from this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Armando Visconti