* Add CONFIG_OPENTHREAD_PLATFORM_MESSAGE_MANAGEMENT to allow enabling
message management by the platform.
* Add implementation of `otPlatMessagePoolInit`, `otPlatMessagePoolNew`
and `otPlatMessagePoolFree`.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it possible to enable Wake-up End Device feature with
CSL receiver disabled (to receive wake-up frames on MED).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add Kconfig option `OPENTHREAD_WAKEUP_COORDINATOR` to enable
the Wake-up Coordinator role. Implement API to set Coordinated
Sampled Transmitting sample time and period for a driver that supports
`IEE802154_OPENTHREAD_HW_CST` capability.
The feature is be enabled on with ieee802154_nrf5 driver with option
by setting default value of CONFIG_IEEE802154_NRF5_CST_ENDPOINT.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
In frames with multiple writes (officially supported through
`CONFIG_LV_Z_VDB_SIZE`) the display needs to be signalled that the
current frame is over and the content should be displayed.
This allows displays to present the UI without tearing artifacts.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
-Update formatting and contents of index.rst for cy8ckit_062s4
-Update formatting and contents of index.rst for cy8ckit_064s0s2_4343w
-Update formatting and contents of index.rst for cy8cproto_062_4343w
-Update formatting and contents of index.rst for cy8cproto_063_ble
-Update formatting and contents of index.rst for xmc45_relax_kit
-Update formatting and contents of index.rst for xmc47_relax_kit
-Change all instances of "PSoC" to "PSOC" for infineon platforms
Signed-off-by: McAtee Maxwell <maxwell.mcatee@infineon.com>
This reverts commit 5e225e0c8b.
Based on #79931 and TSC discussions, it was decided that TinyCrypt
will be deprecated *AFTER* 4.0.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
Remove mutex locking in favour of the standard IRQ locking mechanism.
The primary problem with the mutex implementation is that mutex locking
is forbidden in ISR's. This means that any logging from an interrupt
context (e.g. LOG_PANIC in an exception handler), will itself trigger
another assertion due its attempt to use a mutex.
Furthermore, mutexes are a relatively heavyweight locking scheme, which
doesn't necessarily make sense in the context of extremely short locking
periods that would be expected from RTT.
This change aligns Zephyr with the default RTT locking scheme, which
uses interrupt masking to perform access control.
Resolves#79403.
Signed-off-by: Jordan Yates <jordan@embeint.com>
What is changed?
- Added a new mps3 board an555 for the soc corstone310.
The qualifier to build/run application with board mps3/an555 is
`mps3/corstone310/an555` for secure and
`mps3/corstone310/an555/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone310
and it uses the ARM FVP `FVP_Corstone_SSE-310`.
The qualifier to build/run application with FVP is
`mps3/corstone310/an555fvp` for secure and
`mps3/corstone310/an555fvp/ns` for non-secure.
Why do we need this change?
- This enables FVP support and testing for corstone310.
- A separate FVP variant was added for AN555 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone310/an555` should be used when testing
AN555 with FVP and `arm/mps3/corstone310/fvp` should be used when
testing with AN555 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
The format specifier for size_t is zu.
Using d only works when int and size_t are the same
underlying type which is not the case for 64bit systems,
which leads to a build warning in this case.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Only initialize the HFXO Manager HAL driver if the HFXO is enabled in
DeviceTree, the device uses SYSRTC for timekeeping, and Power Manager
is enabled. HFXO Manager integrates with the Sleeptimer HAL driver for
SYSRTC to autonomously wake the HFXO prior to Sleeptimer wakeup from
deep sleep. It is not needed on devices that don't have HFXO-SYSRTC
integration, and it is not needed if the application doesn't use deep
sleep.
Add missing call to init_hardware() prior to init().
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The aes_unwrap() and aes_decrypt() functions were missing
if CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled.
Add missing C files to fix this.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add OS timer implementation making use of the Sleeptimer HAL.
Sleeptimer integrates tightly with the Silabs Power Manager HAL,
and must be used as the OS timer to achieve optimal power consumption
when using the radio.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
CMSIS SystemInit is not used in Zephyr. Implement the functionality
that isn't already done by Zephyr startup using soc_prep_hook().
The reason the lack of TrustZone init did not create immediately obvious
issues previously is that SMU faults can only happen if the SMU clock is
enabled.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
WPA control interface timeout is hardcoded to 10s, add a configuration
option to remove the hardcode, this is needed sometimes as a workaround
e.g., crypto taking too long to complete the request.
Work around for #79834, increase the default from 10 to 15s, in positive
case this will have no impact.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Even if the enum contains the same values, the values might
change if the wpa_supplicant sources change or Zephyr values
change. In order to avoid weird errors later and prevent the
following warning, add a conversion functions for the enums.
modules/hostap/src/supp_api.c:1172:23: warning: implicit conversion
from enumeration type 'enum mfp_options' to different enumeration
type 'enum wifi_mfp_options' [-Wenum-conversion]
status->mfp = ssid->ieee80211w; /* Same mapping */
modules/hostap/src/supp_api.c:1190:30: warning: implicit conversion
from enumeration type 'enum wpas_mode' to different enumeration
type 'enum wifi_iface_mode' [-Wenum-conversion]
status->iface_mode = ssid->mode;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "enum wpa_msg_type" was not found by default so add needed
include files to get the definitions.
modules/hostap/src/supp_main.h:61:57: warning: ‘enum wpa_msg_type’
declared inside parameter list will not be visible outside of
this definition or declaration
61 | void wpa_supplicant_msg_send(void *ctx, int level,
enum wpa_msg_type type,
const char *txt,
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both the supplicant_set_btwt() and supplicant_ap_bandwidth() are
not found in Zephyr sources so remove them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled, there
are lot of missing functions reported during linking.
Add missing C files to the compilation to fix this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Without this there is an error
modules/lib/hostap/src/crypto/fips_prf_internal.c:47: \
undefined reference to `SHA1Transform'
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The P2P support needs EAPOL support in order to avoid a compilation
error about missing eap field in wpa_ssid struct.
modules/lib/hostap/wpa_supplicant/wpa_supplicant.c:5102:65:
error: ‘struct wpa_ssid’ has no member named ‘eap’
5102 | eap_is_wps_pin_enrollee(&wpa_s->current_ssid->eap)) {
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The functions in ip-addr.c are needed in more places than just
for hostapd so add it unconditionally to the build.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Rename the Silabs HCI driver to hci_silabs_efr32.c to better indicate what
hardware it supports. Also rename the associated devicetree binding and
Kconfig options to be consistent with the new driver name.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Swap from the deprecated device_init_* functions to clock manager
for clock tree configuration. Populate config headers using
device tree representation of clock tree and oscillator config.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The DC-DC converter was unconditionally initialized with default
settings on Series 2. Add device tree binding and nodes, and guard
call to init function. Map DT options to config header from HAL.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Move the CMakeLists.txt and Kconfig files from the hal_silabs tree under
modules/hal_silabs in the main tree. This also includes all Zephyr shim
code from the hal_silabs tree.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The Thrift library makes use of POSIX C functions such as ctime_r(), which
are not part of the ISO C standard.
This commit adds a Thrift module-wide `_POSIX_C_SOURCE` feature test macro
definition in order to ensure that the required POSIX C functions are
available when compiling the Thrift library.
Note that this was not caught earlier because Newlib and older versions of
Picolibc did not properly fence off some POSIX functions behind the feature
test macros.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This new version introduces a new sub-command `uicr-compile`, which will
generate `uicr.hex` based on a new binary format required by an upcoming
release of Secure Domain Firmware (SDFW) closer to production.
Since this is a breaking change, and SDFW is not finalized yet, we need
to support two nrf-regtool versions for a short time, and use different
CLI invocations based on which version is installed. Hence, the minimum
required version is unchanged.
Additionally, retire CONFIG_NRF_REGTOOL_EXTRA_GENERATE_ARGS. There will
be no use for it moving forward.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
For transmit_message if the transmission is timed and underlying
driver supports `IEEE802154_HW_SELECTIVE_TXCHANNEL` then use
the selective txchannel feature for transmission.
This does not change the current `channel` at the moment of call,
the driver will transmit the message on the channel selected through
`net_pkt_set_ieee802154_txchannel` then (after receiving an ACK
if requested) it will return to the original channel.
When Kconfig option IEEE802154_SELECTIVE_TXCHANNEL is turned on,
the timed transmissions scheduled some time ahead on different
channel will not abort ongoing reception until the exact moment
of transmission comes.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Adrian Gielniewski