The DC-DC converter was unconditionally initialized with default
settings on Series 2. Add device tree binding and nodes, and guard
call to init function. Map DT options to config header from HAL.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Move the CMakeLists.txt and Kconfig files from the hal_silabs tree under
modules/hal_silabs in the main tree. This also includes all Zephyr shim
code from the hal_silabs tree.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Enable USART1 that can be used with external periphs via Arduino pins.
LPUART1 can also be used on the same pins.
Tested with tests/drivers/uart_elementary
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Increases default size of stack used by work queue RX thread
from 1024 to 1280 to avoid memory issues.
After adding the buffer with the default size of 128
that is allocated on the thread's stack (see #77552),
there is too little stack left during heavy stress.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
First approach had to be reverted because it did not pass tests.
Take 2 attempts to use uintptr_t instead of a pointer and cast it
to the expected pointer when necessary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
- add ITCM definitions (for LinkServer) in board.cmake
- update of soc.c to support RAM images (stack pointer)
- doc update
Change applies to both versions of the MIMXRT1170 EVK
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The Thrift library makes use of POSIX C functions such as ctime_r(), which
are not part of the ISO C standard.
This commit adds a Thrift module-wide `_POSIX_C_SOURCE` feature test macro
definition in order to ensure that the required POSIX C functions are
available when compiling the Thrift library.
Note that this was not caught earlier because Newlib and older versions of
Picolibc did not properly fence off some POSIX functions behind the feature
test macros.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The Thrift module tests were under the "newlib" namespace, presumably
because newlib was the default at the time of their introduction.
Since newlib is no longer the default libc and Thrift is not being tested
against multiple C libraries, this removes the libc type from the Thrift
test identifiers.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This new version introduces a new sub-command `uicr-compile`, which will
generate `uicr.hex` based on a new binary format required by an upcoming
release of Secure Domain Firmware (SDFW) closer to production.
Since this is a breaking change, and SDFW is not finalized yet, we need
to support two nrf-regtool versions for a short time, and use different
CLI invocations based on which version is installed. Hence, the minimum
required version is unchanged.
Additionally, retire CONFIG_NRF_REGTOOL_EXTRA_GENERATE_ARGS. There will
be no use for it moving forward.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Enable flash driver test for MAX32690 boards.
Signed-off-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Extracts the max32 flashprog linker section to a dedicated linker script
that is conditionally included only when the flash driver is enabled.
This prepares max32 soc family to set SOC_LINKER_SCRIPT directly to the
common arm cortex-m linker script.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add support for building and running the BT tester on the
nrf5340_audio_dk.
This is copying the configuration used for the nRF5340 DK.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use DT_*IRQN helper to get the IRQ number on systems with multi-level
interrupt configuration instead of IRQ number on particular interrupt
controller.
Signed-off-by: Michal Simek <michal.simek@amd.com>
If CONFIG_NET_PKT_ALLOC_STATS is enabled, then "net mem" command
can show net_pkt allocation statistics like succeed / failed
allocation counts, average sizes and allocation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Though nRF7000 is a special Scan only chipset, scan only can work with
any nRF70 platforms, no need for this enforcement and we can keep things
flexible.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In addition to matching zephyr, prefixed bindings, match common bindings
(assuming that common bindings are those that do not have any prefix)
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Consolidate the testcase.yaml definition for the display sample where
possible to use a single testcase for all shields. This won't work for
all testcases, but helps avoid the pattern where a new testcase using
"platform-allow" is added for every shield/board combination that needs
to be run with this sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
What is changed?
Twister tests and sample applications can now run successfully again
for `fvp_aemv8r_aarch64`.
`__kernal_ram_start` is also modified for cortex_m and cortex_a_r
to be consistent with aarch64 linker script and avoid such issue in
the future.
How is it changed?
Modified linker script to make sure that `__kernal_ram_start` to
`__kernal_ram_end` includes both, bss and data, sections as before.
Why do we need this change?
Twister tests and sample applications failed for `fvp_aemv8r_aarch64`
and it was found that commit #87f68b4dfed14eb08132fe9798fb209f1bed64f2
moved the bss section but missed moving the __kernal_ram_start to the
data section which resulted in a crash.
The change is tested with FVP_BaseR_AEMv8R version: 11.27.19.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Enable CONFIG_CONSOLE in the Segger RTT console snippet as this is a
dependency for CONFIG_RTT_CONSOLE.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Test was failing because after re-enabling QDEC there is an interrupt
REPORTRDY coming after some time. Test had k_msleep(100) added to
accomodate for that but it was added after sensor_sample_fetch and
should be added before so that sample with data from REPORTRDY event
is fetched so that next read is empty as expected.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This patch adds tests for the wifi_credentials library.
Both the main functions and the backend implementations are tested.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
This patch adds a feature to directly connect to stored Wi-Fi
credentials without having to compose the NET_MGMT commands yourself.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Upstream NCS's library for storing Wi-Fi credentials.
This library allows storage of Wi-Fi credentials
using different backends.
Either the Zephyr settings subsystem
or the PSA secure backend can be used.
For testing purposes, credentials can be defined statically.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Signed-off-by: Kaja Koren <kaja.koren@nordicsemi.no>
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Currently GCC complains that temp64 may be used uninitialized in this
function. Adds a check to ensure time is valid before assignining
and fixes GCC warning.
Signed-off-by: Brandon Allen <brandon.allen@exacttechnology.com>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A new zephyr:board:: Sphinx directive allows to flag a documentation
page as being the documentation for a specific board, allowing to
auto-populate some of the contents, ex. by adding a board overview a la
Wikipedia, and later things like supported HW features, etc.
A corresponding :zephyr:board: role allows to link to a board doc page.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Load the board catalog only once at build-inited time so that
it's cached and enabled things like boards, vendors, and socs
to eventually become first class Sphinx objects.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Aksel Skauge Mellbye