This reverts commit eb34437522.
Fixes#5113
The `alsatplg -o -` feature is incompatible with `-v` and basically
buggy because it happily sends .tplg output and debug statements to
the same place without a care. To reproduce the bug, simply run:
VERBOSE=1 ./scripts/build-tools.sh -T
... then observe .tplg output files like this:
B0x003d3b/015675 - pcm 'DMIC': write 912 bytes
B0x0040cb/016587 - pcm 'HDMI1': write 912 bytes
B0x00445b/017499 - pcm 'HDMI2': write 912 bytes
B0x0047eb/018411 - pcm 'HDMI3': write 912 bytes
B0x004b7b/019323 - pcm 'DMIC16kHz': write 912 bytes
B0x004f0b/020235 - block size for type be (11:10) is 0x2ad4/10964
B0x004f0b/020235 - header index 0CoSA^E^@^@^@^@^@^@^@^H^@^@^@$^@^@
^@^@^@^@^@s^@^@^@^@^@^@^@^A^@^@^@p^@^@^@ ^@^@^@.^@^@^@ ^@^@^@^F^@^
@^@^F^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^
@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^
@^@^@^@^@^@^@^@^@^...
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
In preparation for Topology2.0, move the current topology files
to the topology1 folder and once the 1.0 topologies are
built copy them to the /sof/tools/build-tools/topology folder.
When Topology2.0 topologies come along, they will be built into
the topology2 folder and the 2.0 binaries will be copied over
the 1.0 binaries.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
For speaker pipeline, we want to deploy DRC/EQ for partial TGL device
like Eldrid. The definition flag DRC_EQ is added to make the choice of
adopting the playback pipeline with DRC/EQ.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
Dynamic pipelines will fail with the sof-apl-nocodec topology
due to issues with the memory allocator. Revert back to
use static pipelines until we have a more flexible memory
allocatory available with Zephyr.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
There are TGL devices using either PDM0 or PDM1 port for the DMIC16k
DAI for hotword detection. This patch adds the DMIC_DAI_LINK_16k_PDM
parameter and builds both versions.
Signed-off-by: Ben Zhang <benzh@chromium.org>
For speakers SDW2 link is used.
For Headset SDW0 link is used.
add sof-adl-sdw-max98373-rt5682 topology
Signed-off-by: Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Somehow we only support this configuration for BYT, but there are
Baytrail devices using the same codec.
BugLink: https://github.com/thesofproject/sof/issues/4160
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Builds a configuration of the max98373-rt5682 topology with AMP_SSP=2
defined and includes the IIR component
Signed-off-by: Ross Chisholm <ross.chisholm@xperi.com>
Some devices are using rt711 only, without amplifiers.
Add the "EXT_AMP" option in sof-tgl-rt711-rt1308.
Signed-off-by: Libin Yang <libin.yang@intel.com>
This reverts commit 2c69afc5fd.
The dynamic pipeline feature is broken with PA enabled. Revert
this change until the issue is sorted.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add support for cs42l42 running on GLK boards. We add a 10 ms BCLK
delay to the SSP_CONFIG_DATA of SSP2 since the codec PLL is locking on
BCLK. Without the delay, there could be noise on TX path.
Signed-off-by: Brent Lu <brent.lu@intel.com>
i.MX8QXP / i.MX8QM have the same configuration w.r.t topology.
But since we firstly added support for 8qxp all the names use
8qxp and then for 8qm we just borrow the files but using the 8qxp
naming.
This sometimes might cause confusion. So, we group under the
umbrella of imx8 naming both i.mx8qxp and i.mx8qm.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
This is based on early hardware information and subject to change.
The ADL topologies use the link information to avoid confusions on
configurations. The kernel tables will use the same conventions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This patch adds IIR support in the tgl-max98373-rt5682 topology to allow
the frequency response of the headset output to be tuned.
Signed-off-by: Ross Chisholm <ross.chisholm@xperi.com>
Adapt the apl KWD topology to imx8m by switching to
SCHEDULE_TIME_DOMAIN_DMA on capture pipeline and
creating a no LP capture file for KFBM component.
Signed-off-by: Cristina Feies (ilie) <cristina.ilie@nxp.com>
The main topology directory contains a number of topologies those
are not used directly by Linux kernel machine drivers. Also there
are variant topologies built those are modified versions of the
main topology. The topologies for testing and devolopment are moved to
directory development. The topologies those may be used by end users
to enhance the audios are moved or built to dsp_enhancements directory.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This file was used for early enablement of SoundWire on a platform,
before we had support for amplifiers. This is no longer needed, let's
remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Add a topology file for Bay Trail boards with a WM5102 codec
connected to SSP0.
These setups works with the standard settings from sof-byt-codec.m4.
This has been tested on a Lenovo Yoga Tablet 2 1015L.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We used the same macros in .m4 files but missed the additional
configuration needed in CMakeLists.txt
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This patch eases the definition of headset post processing filters
blobs. First, the macro name PPROC is changed to HSPROC to indicate
the processing targets headset endpoint.
The CMakeLists.txt for topologies is edited to add build of topology
sof-hda-generic-eq.tplg that does not include DMIC endpoints for
devices without such. Previously there was no variant without
DMIC enable.
The main macro sof-hda-generic.m4 is enhanced to define HSPROC as
volume to use pipeline pipe-volume-playback.m4 when it has not been
defined in CMakeLists.txt.
The definitions for PIPELINE_FILTERx are copied from endpoint specific
HSPROC_FILTERx if they were defined. If they were left undefined
the pipeline will apply default processing configuration (e.g.
for EQs pass-through).
In the example the EQs are left to pass-through. The topology
sof-hda-generic-eq.tplg shows an example of explicitly setting
the filter coefficients at the top level. The FILTER1 is impacts the
first algorithm in pipeline (IIR) and FILTER2 the second algorithm
algorithm (FIR) in the used HSPROC definition eq-iir-eq-fir-volume.
In this case volume does not support such but for future there could
be FILTER3, FILTER4, ... added if need. The current m4 macros support
now only HSPROC_FILTER1 and HSPROC_FILTER2.
The patch adds undefine to PIPELINE_FILTERx in intel-generic-dmic.m4 to
make sure the macro is not set by other than DMICPROC_FILTERx. The
same is done for 16 kHz DMIC capture. Currently there were no issues
caused by it.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Somehow we use different configurations for the DMIC, remove
everything in this file and rely on the same macros.
The only difference with HDaudio is the pipeline and PCM device
numbers.
the old topology names sof-icl-rt700 and sof-cml-rt700 alias to the
same 4ch topology, when the kernel looks for the 2ch or 4ch versions
we can remove it. Make then break.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This topology works on i.MX8MP with wm8960 codec.
When loaded, one will have a sound card with two playback subdevices.
This way, samples pushed to the two subdevices will be mixed and
sent to SAI3 and then to wm8960 codec.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This topology works on i.MX8QM and i.MX8QXP with cs42888 codec.
When loaded, one will have a sound card with two playback subdevices.
This way, samples pushed to the two subdevices will be mixed and
sent to ESAI0 and then to cs42888 codec.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This topology works on i.MX8QM and i.MX8QXP with wm8960 codec.
When loaded, one will have a sound card with two playback subdevices.
This way, samples pushed to the two subdevices will be mixed and
sent to SAI1 and then to wm8960 codec.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add a topology file for Cherry Trail boards with a NAU8824 codec.
These setups work with the standard settings from sof-byt-codec.m4.
This has been tested on the following devices:
Medion E2215T: stereo speakers, analog mic
Medion E2228T: stereo speakers, stereo digital mics
Cube iWork8 Air: mono speaker, analog mic
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a macro 'CODEC' to generate topology for rt1011 speaker amp.
Add a macro 'FMT' to seperate speaker dai format: s16le, s24le
Modify both pcm name by 'Speakers'
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Add tgl rt715-rt711-rt1308 support. But keep the PCM order as
Headphone, Headset mic, Speakers, Microphones.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Changed the tplg file name in kernel driver according to Maintainers
feedback. So, topology file name here needs the corresponding change.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
This patch adds the playback (for test only) and capture pipelines
with Time Domain Fixed Beamformer (TDFB) component.
Topologies variants to test capture with beamformer are built for
sof-hda-generic and sof-apl-pcm512x platforms. The beam direction
is +/- 10 degrees as compromise between notebook camera and stereo
capture. The dual beams preserve the stereo characteristic. The
beamformers are added to both 48 kHz and 16 kHz DMIC capture
pipelines.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds support to define from CMakeLists.txt or a
higher level platform topology file the definition of DMICPROC and
DMIC16KPROC to select desired capture processing algorithms pipeline
from pipe-x-capture.m4 and pipe-x-capture-16khz.m4 macros instead
of hard coded processing eq-iir-volume. It is preparation to add
support for beamformer processing for microphones.
The impacted platforms are sof-hda-generic, sof-cml-rt5682, and
sof-apl-pcm512x. This patch does not change built topologies.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Add development folder for topologies that not for production.
First add sof-tgl-nocodec-ci as a validation topology.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Add FW echo reference to nocodec TPLG on SSP0.
Add internal loopback on SSP0. We can compare echo reference and
loopback capture stream.
Add smart amplifier for nocodec on SSP2
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
This patch adds to CMakeLists.txt build of duplicate one and three
channels dmic capture topologies. They are needed to match the driver
that loads a topology that matches the number of microphones based on
configured microphones count in device BIOS.
This is an intermediate solution to enable microphones on such
devices. The mono audio will appear as double mono for user space. A
true mono topology and firmware will be created later.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
tgl-rt711-rt1316-rt714 is almost the same as tgl-rt711-rt1308-rt715 and
can use the same topology file.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Update sof-tgl-max98373-rt5682 to take speaker amp's SSP ID as input.
This is to accommodate DUT's which has amp connected on SSP2.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Marc Herbert