Moved header files to the module directory to separate an shared interface
used by sof and native loadable modules.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Split out ipc3 and ipc4 specific code from tdfb module, also
refined header files for new source file.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Move out ipc3 and ipc4 specific code to corresponding source file.
Also, move some common functions to header file.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Register pm_state_notifier to set ready_flag for secondary core when it
is powered up for second time after first fw boot. We can remove
CONFIG_ADSP_IMR_CONTEXT_SAVE check for cavs platform for this feature.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Adding all source files in a single, giant zephyr/CMakeLists.txt is
inconvenient and does not scale.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Adding all source files in a single, giant zephyr/CMakeLists.txt is
inconvenient and does not scale.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
New IDC request idc_comp_free() is required to delete
component located on different core than the pipline to which
the module belongs.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
This reverts commit fbde1dccf8.
Now that CONFIG_SAMPLE_SMART_AMP has a hard, menu dependency on
CONFIG_SAMPLES, we don't need to encode Kconfig dependencies in CMake
any more.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Addition of SRC Lite module,
which only supports a subset of conversions
supported by the SRC module.
Purpose of SRC Lite module is memory optimization.
Code of SRC Lite is drastically reduced and requires
significantly less memory. When needed one of
defined conversions, driver can choose SRC Lite
module instead of SRC module to optimize memory utilization.
48 -> 16kHz
44.1 -> 16 kHz
32 -> 16 kHz
44.1 -> 48
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
create ipc3 and ipc4 specific source file, these files will
only be used to store specific code accordingly.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
The_very_long_variable names make it hard to modify
the code and keep to under-100-characters coding
guidelines of the codebase.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The file is found from subdirectory src/audio/google. Without
fix if CONFIG_COMP_GOOGLE_HOTWORD_DETECT is enabled build fails:
CMake Error at sof/zephyr/cmake/modules/extensions.cmake:424
(add_library):
Cannot find source file:
/src/audio/google_hotword_detect.c
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The Pulse Density Modulated Microphone Interface (MICFIL) is a popular
way to deliver audio from microphones to the processor in several
applications, such as mobile telephones. However, current digital-audio
systems use multibit audio signal (also known as multibit PCM) to
represent the signal. This block implements the required digital
interface to provide a 24-bits audio signal from a PDM microphone
bitstream in a configurable output sampling rate.
This patch adds initial support for PDM MICFIL IP found on i.MX8MP
board.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
DP queue is a lockless circular buffer
providing safe consumer/producer cached operations cross cores
prerequisites:
1) incoming and outgoing data rate MUST be the same
2) Both data consumer and data producer declare
max chunk sizes they want to use (IBS/OBS)
required Buffer size:
- 2*MAX(IBS,OBS) if the larger of IBS/OBS
is multiplication of smaller
- 3*MAX(IBS,OBS) otherwise
The queue may work in 2 modes
1) local mode
in case both receiver and sender are located on
the same core and cache coherency
does not matter. dp_queue structure is located in cached memory
In this case DP Queue is a simple ring buffer
2) shared mode
In this case we need to writeback cache when new data
arrive and invalidate cache on secondary core.
dp_queue structure is located in shared memory
dpQueue is a lockless consumer/producer safe buffer.
It is achieved by having only 2 shared variables:
write_offset - can be modified by data producer only
read_offset - can be modified by data consumer only
as 32 bit operations are atomic, it is multi-thread and multi-core save
There some explanation needed how free_space and
available_data are calculated
number of avail data in circular buffer may be calculated as:
data_avail = write_offset - read_offset
and check for wrap around
if (data_avail < 0) data_avail = buffer_size + data_avail
The problem is when write_offset == read_offset,
!!! it may mean either that the buffer is empty
or the buffer is completely filled !!!
To solve the above issue having only 2 variables mentioned before:
- allow both offsets to point from 0 to DOUBLE buffer_size
- when calculating pointers to data, use:
data_bufer[offset % buffer_size]
- use double buffer size in wrap around check when calculating
available data
And now:
- write_offset == read_offset
always means "buffer empty"
- write_offset == read_offset + buffer_size
always means "buffer full"
- data_avail = write_offset - read_offset
if (data_avail < 0) data_avail = 2 * buffer_size + data_avail
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Because module uses SYS_INIT defined in init.h. Things likely worked
because of indirect includes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Module is using Zephyr SYS_INIT API, defined in init.h, not device.h.
Code relied on indirect includes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The z_delayed_work field in struct task is a delayed work, so to go from
k_work to it safely there's an extra step. Add a
k_work_delayable_from_work to fix that.
This is harmless right now because k_work is the first field in
k_work_delayable but the extra step is the safe way of doing it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This check in change eliminates the extra include isa.h header file
from the exp_fcn_hifi.c file, as it does in the exp_fcn.h file.
Signed-off-by: ShriramShastry <malladi.sastry@intel.com>
Add definitions for pipeline state change phases to be executed when a
PPL_STATE message is handled by a remote core.
The phase can be a combination of:
PREPARE and TRIGGER.
PREPARE will run a configuration (state change preparations) phase on the
pipeline
TRIGGER will run a a trigger on the pipeline
Set ONESHOT in ipc4_set_pipeline_state() to have both phases to be run in
order to avoid regression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
In preparation to share the extension with an action, first introduce a
mask so that the idc code is prepared for a shared use of the extension.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Remove support for Intel cAVS Low Power Sequencer for Power Management.
This code is specific to XTOS builds for Tiger Lake (cAVS)
platforms and no longer used in Zephyr builds.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Remove all cmake rules to build SOF for Intel cAVS2.5 hardware
using non-native drivers (i.e. use XTOS drivers from SOF tree
instead of Zephyr native drivers). This is no longer supported
nor tested, so can be removed.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Memory window management has been moved to Zephyr drivers
for this platform, so building this file on SOF side is no
longer needed.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
By enable/disable COMPILER_INLINE_FUNCTION_OPTION to control
add or remove -fno-inline-functions build option for sof zephyr
code.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
When converting #ifdef CONFIG_ADSP_IMR_CONTEXT_SAVE to if(IS_ENABLE(
CONFIG_ADSP_IMR_CONTEXT_SAVE), we should use if (!IS_ENABLE() ||
Signed-off-by: Rander Wang <rander.wang@intel.com>
Fix multicore test issue on cavs platforms which don't support context
save now, so need to init cpu when the core boot up.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Add virtual heap allocators that allocate on proper heaps and
map physical memory where nesscessary.
Add free function that frees up the virtual heap memory and
unmaps physical memory when possible.
Virtual heap allocator allows using virtual memory as a base
for allocation and booking memory. Physical memory banks
will be mapped when needed allowing for greater flexibility
with mapping.
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
This will allow to correctly set multiple pipelines state
even if they are allocated on different cores.
ipc4_set_pipeline_state will check if several cores are involved
- set ppl state if only current core requested
- process IPC on another core if only single secondary core requested
- send IDC messages if several secondary cores involved
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
To support pipelines connection between cores, ipc4_create_buffer()
must be able to create buffer shared between source and sink
components created on different cores. ipc4_create_buffer() requires
source component obs size. When both source and sink components
created on same core, ipc4_create_buffer() is executed on that core,
otherwise it is executed of core 0 (IPC processing core). So for the
case when source and sink components are created on different cores
comp_get_attribute_remote() is used to receive source obs size.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
bind/unbind handler must be called from core on which component was
created.
When both source and sink components are created on same core,
bind/unbind IPC is processed on that core. However, when connected
source and sink are on different cores, IPC is processed on core 0.
Hence comp_bind_remote() and comp_unbide_remote() is added to call
bind/unbide from proper core.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
This will allow the fuzzer to probe deeper into the code while also
allowing CI to build test the adapter.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Add a stub for the Waves library for the fuzzer to build against. This
will also improve build tests in CI.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Zephyr uses MP_MAX_NUM_CPUS internally to represent the
number of cores available and consequently to allocate
resources. It is even expected, and checked through assert,
that these two symbols have the same value. Use different
value can lead to an undesired behavior, so lets use
MP_MAX_NUM_CPUS.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This is part of fw which helps loaded module in communication with adsp
Also it provides basic operations for creation of component driver
Common part for native loadable modules and iadk is put together and
remade into native API. That way system services are using generic
methods defined in native system service.
Signed-off-by: Dobrowolski, PawelX <pawelx.dobrowolski@intel.com>
Struct cascade_root & mn are used by xtos build only so remove them for
zephyr native driver. And these two items are too specific to intel
platforms. Remove these item also save memory.
Signed-off-by: Rander Wang <rander.wang@intel.com>
During PowerOff (D3) transition Zephyr Power Manager must have
a pointer in IMR to save the LP/HPSRAM memory before
powering off.
As zephyr has no access to IMR heap, the memory must
be allocated by SOF
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Make audio_stream capable of using pipeline2.0
sink and source API
This change makes integration of sink/src api
possible in incremental way
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
There are many operations on sink/source that may be put into a
common library. This is the place for it.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
this is a definition of API to sink of audio data
THE SINK is any component that can store data somehow
and provide a buffer to be filled with data at request.
The sink API does not define how the data will be processed/used
The user - a module - sees this API as a destination
it must send data to
The IMPLEMENTATION - audio_stream, DP Queue -
sees this as a producer that PROVIDES data for processing
Examples of components that should expose SINK api
- /dev/null
all the data stored in sink buffer are just simply discarded
- I2S sender
Data stored in sink buffer will be sent to the external world
- a memory ring buffer
data stored in the buffer will be sent to another module
(usually using source API, but it does not matter in fact).
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
this is a definition of API to source of audio data
THE SOURCE is any component in the system that have data
stored somehow and can give the data outside at request.
The source API does not define who and how has produced
the data
The user - a module - sees this as a producer that
PROVIDES data for processing
The IMPLEMENTATION - audio_stream, DP Queue - sees
this API as a destination it must send data to
Examples of components that should expose source API:
- DMIC. Data are coming from the outside world,
stores in tmp buffer and can be presented
to the rest of the system using source_api
- a memory ring buffer
Data are coming from other module
(usually using sink_api, but it does not matter in fact)
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
The 32-bit HiFi4 exponential library function has an accuracy of 1e-4,
a unit in last place error of 5.60032793, and output ranges from
0.0067379470 to 148.4131591026 for inputs from -5 to +5 (Q4.28) (Q9.23).
Signed-off-by: ShriramShastry <malladi.sastry@intel.com>
There's really no reason to fall back on a default "platform" and pick
up a bunch of other, totally random settings.
Now the following command fails immediately with a useful `platform not
defined` error message instead of stopping with a cryptic
`platform/trace/trace.h: No such file or directory` after successfully
compiling half the .c files in a Frankenstein CONFIG_uration.
```
west build -p --board mimx8mm_evk_a53 modules/audio/sof/app
```
More context in #7192.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Follow the k_sys_fatal_error_handler implementation in fatal.c in
zephyr framework. Without this halt, our k_sys_fatal_error_handler
will be called copules time and result to many useless IPC messages
to host.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Do not make the switch yet. Make the switch in a smaller commit that can
more easily be reverted in case of a bug or some missed dependency
somewhere.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The DSP cannot enter the power gating state if it has not yet received
an ack from host after sending an ipc message.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Thanks to PR [1], Zephyr cache management API can now be
used on xtensa-based SoCs. As a consequence to this, there's
no longer a need to use SOF's arch/ layer for cache management.
This commit forces all SoCs which support Zephyr to use
its native cache management API.
[1]: https://github.com/zephyrproject-rtos/zephyr/pull/50136
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Every module which needs AMS for notifications uses the same flow when
configuring itself as a consumer or producer for such notifications.
Add AMS helper functions to avoid code repetition.
Signed-off-by: Ievgen Ganakov <ievgen.ganakov@intel.com>
Send panic notification message to host when panic happens. The panic
detail is built by Zephyr framework and included in debug memory window.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Rander Wang <rander.wang@intel.com>
New Docker container tagged v0.26.4 contains new Zephyr SDK v0.16.1
needed to build with Zephyr main branch.
New Zephyr SDK is backward compatible with the older Zephyr revisions
so the upgrade is done for SOF manifest revisions too.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
This implies the following changes:
1) domain_task_cancel() shall no longer receive the number
of tasks, but, instead, will receive the task to be cancelled.
2) zephyr_dma_domain_task_cancel() will do k_sem_give() if the
sched_comp associated with the given task is != COMP_STATE_ACTIVE.
3) SEM_LIMIT is changed to CONFIG_DMA_DOMAIN_SEM_LIMIT and can
be configured.
The reasoning for the changes are the following:
1) and 2): In the case of mixers, domain_task_cancel()'s
num_tasks is not a reliable way to determine if the DMA
IRQs got cut off. Let's consider the following scenario:
We have a mixer with 1 non-registrable pipeline task and
1 registrable pipeline task. Upon TRIGGER_STOP we'd have
the following flow (i.MX boards):
a) SAI_STOP => DMA IRQs get cut off.
b) Cancel non-registrable pipeline task.
c) Cancel registrable pipeline task.
During b) and c), domain_task_cancel() would get the following
arguments:
b) domain_task_cancel(sch, 1)
c) domain_task_cancel(sch, 1)
This is because the non-registrable pipeline task wasn't
dequeued before c) so, even though the DMA IRQs got cut
off during a), zephyr_dma_domain_task_cancel() does not give
resources to the semaphore so what happens is zephyr_ll_run()
will no longer execute and the pipeline tasks remain queued.
3) Since the semaphore can accumulate more than 1 resource
at a given time (and since it's safe to make SEM_LIMIT depend
on the load of the system), SEM_LIMIT was changed into a config.
This allows the user to change SEM_LIMIT based on the system
load. For example, if there's 2 non-registrable pipeline tasks
and 1 registrable pipeline task (same scheduling component),
an appropriate value for SEM_LIMIT should be 3 (since the
semaphore can be given at most 3 resources during the task
cancellation process). Of course, making SEM_LIMIT depend on
the system load is the worst case but this way we can make sure
that the cancelled tasks get dequeued properly.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
For the functions platform_interrupt_clear and platform_interrupt_set,
the existing definitions based on arch_interrupt_* do not compile with
the xt-clang 2023 toolchain for imx. Use the Zephyr wrapper
implementations for those for now.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Informing the primary core that the Idle thread on secondary core is
ready. During the D3 exit flow thread is not initialize again, but
restored from previously saved context.
This patch includes also zephyr version update to aba3b12e31 (total 15
commits). Changes related to intel_adsp contain refactor and fixes for
ACE secondary cores power flows.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Idle thread should be initialize only when core it booting for the first
time. Doing this again would overwrite the kernel structs and the idle
thread stack.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Split smart_amp_test.c to IPC3 version smart_amp_test_ipc3.c
and IPC4 version smart_amp_test_ipc4.c
Signed-off-by: Andrula Song <andrula.song@intel.com>
Due to the fact that on i.MX93 the host will initialize the
SOF_IPC_FW_READY sequence there's no need to call
platform_boot_complete() at the end of start_complete(). This
will be handled in the IPC3 handler.
This commit makes sure that aforementioned scenario won't
happen for i.MX93 while keeping the flow constant for the
other platforms.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Use zephyr cache APIs instead of xtensa specific ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
DP scheduler is intended to work on MTL and
future platforms only - has not been tested on
any legacy.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
This commit introduces support in the CMakeLists.txt of Zephyr for
building SOF for i.MX93 platform.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
CMake seems to behave differently on Linux and Windows: it generates
different `-I` command line parameters. This results in spurious
`__FILE__` mismatches and non-reproducible builds when using
CONFIG_ASSERT, see example in #7428.
On Windows, '..' seem resolved more often which also seems to convert
forward slashes to backslashes.
They are also less readable and wasting a bit of space. Remove them
using cmake_path(SET ...)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
ARM64's GIC doesn't utilize cascaded interrupts so interrupt_get_irq
will have to return the given INTID.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit removes all occurrences of the soc.h header file
since this is not used. This also fixes build problem on i.MX93
caused by the fact that i.MX93 doesn't have a soc.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This is required by ARM64 platforms as they don't have
an arch/compiler_info.h so the compilation would fail.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
DMA domain with Zephyr works fine for i.MX platforms. So, remove
"experimental" from description and enable it by default for i.MX
platforms.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Start using zephyr pm_runtime, clk and dma glue code in cavs25 native
drivers build. Move the files from ace/lib into zephyr/lib.
Also update west.yaml to related zephyr commit as power related
files have been moved to zephyr side.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Add HiFi3 implementation of dcblock processing functions.
Compared with generic C version, the 16 bit format can save
about 48.1% cycles, and 48.4% for 24 bit format and 52.6%
for 32 bit.
Signed-off-by: Andrula Song <andrula.song@intel.com>
The DP scheduler is a scheduler based on Zephyr preemptible
threads. It will start each SOF task as a separate Zephyr
thread.
At current implementation the scheduler can trigger each
task/thread periodically or on demand.
TODO: more sophisticated scheduling decisions, with deadline
and task budgets calculations.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
some platforms don't use Zephyr, therefore they can't
use DP scheduler. Add a config option
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Add HiFi4 implementation of dcblock processing functions.
Compared with generic C version, the 16 bit format can save
about 54.8% cycles, and 53.1% for 24 bit format and 49.1%
for 32 bit.
Signed-off-by: Andrula Song <andrula.song@intel.com>
Remove all support for cAVS 2.0 platformsm including Ice Lake and
Jasper Lake, they aren't supported any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
select_cpu_clock() on cAVS currently takes all the clock locks while
adjusting them. And that function is called from clock_set_freq()
which also takes one of those locks, which leads to a recursive
spin-lock. To fix that remove per-clock spin-locks and use a global
clock lock instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add separate file for notifications initializations. All generic
initializations could be stored in one place. Add initialization for
generic xrun notification message which can be sent by gateway.
Signed-off-by: Piotr Makaruk <piotr.makaruk@intel.com>
Remove all support for cAVS 1.8 platformsm including Cannon Lake,
Comet Lake, Whiskey Lake and Coffee Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for cAVS 1.5 platformsm including Apollo Lake,
Sky Lake, Kaby Lake, Broxton and Gemini Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The purpose of this commit is to get rid of the dependency
on xtos/include/sof/lib/io.h when building SOF for Zephyr.
Apart from that, this commit solves or gets us closer to
solving the following issues:
1) Compiling SOF for arm64 architecture results
in warnings such as the following:
"warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]"
2) Enabling CONFIG_SOF_ZEPHYR_STRICT_HEADERS will
result in a compilation error. One of the causes
for this is the fact that sof/lib/io.h doesn't
exist.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
One of the functions of the IDC thread is to execute IPCs on
secondary cores, those have to be executed with the same priority as
when they're run on the primary core, i.e. with the priority of the
IPC thread. Set IDC thread priority equal to the IPC thread.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Recent changes to Zephyr header files written in C++
use templates and features provided by the C++14 standard.
Meteorlake board that is built with Zephyr has some C++ code
that uses those headers.
We upgrade straight to C++17 since it is newest standard currently
supported by xt-clang toolchain.
This change does not affect any other boards since the do not
have any C++ code as the time of writing.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Add Asynchronous Messaging Service. This can be used to communicate between
modules.
Asynchronous Messages are one-way messages from one producer to one or
multiple registered consumers. Messages between modules on different
cores are sent through IDC. All inter-core communication must be proxied
by the main core.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
All arch/ files should be only used by XTOS. Since the
include statement from cpu.h is not used at all we can safely
remove it. With this, we can make the split between Zephyr
and XTOS more clean.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The purpose of this commit is to separate the XTOS-specifc
code from the Zephyr-specifc code found in sof/drivers/idc.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The purpose of this commit is to separate XTOS-specific code
from the Zephyr-specific code found in sof/schedule/task.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The purpose of this commit is to separate the XTOS-specifc
code from the Zephyr-specifc code found in sof/sof.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fix the peak volume calculation error in volume component, calculate
the maximum absolute value of input as peak volume as close source
firmware did.
Signed-off-by: Andrula Song <andrula.song@intel.com>
The purpose of this commit is to separate Zephyr-specific definitions
from XTOS-specific definitions. Based on the build, <rtos/panic.h>
will contain the required definitions.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The 32-bit exponential library function has an accuracy
of 1e-4 and a unit in last place error of 4.5878 for
inputs from -5 to +5 (Q4.28) and outputs from 0.0067379470
to 148.4131591026 (Q9.23).
Signed-off-by: ShriramShastry <malladi.sastry@intel.com>
Remove all support for Broadwell and Haswell platforms, they
aren't supported any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for Baytrail and Cherrytrail platforms, they
aren't supported on the "main" branch any more. To build SOF for them
use the "table-v2.2" branch.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
All SOF modules are now initialised using native Zephyr APIs, no need
any more in a dedicated ELF section. TODO: remove from linker scripts
once this is merged.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register probe with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register waves with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register dts with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register google-hotword with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register tdfb with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register up-down-mixer with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register rtnr with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register igo-nr with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register google-rtc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register multiband-drc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register drc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register crossover with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register aria with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register passthrough with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register cadence with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register copier with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register basefw with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register mux with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register dcblock with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register asrc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register smart-amp with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register kpb with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register host with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register keyword with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register eq-iir with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register eq-fir with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register tone with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Andrula Song