Addition of SRC Lite module,
which only supports a subset of conversions
supported by the SRC module.
Purpose of SRC Lite module is memory optimization.
Code of SRC Lite is drastically reduced and requires
significantly less memory. When needed one of
defined conversions, driver can choose SRC Lite
module instead of SRC module to optimize memory utilization.
48 -> 16kHz
44.1 -> 16 kHz
32 -> 16 kHz
44.1 -> 48
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
KD topology tests fail on LNL due to insufficient size of
heap memory. During creation of KD topologies with
4ch audio format, FW fails on memory allocation.
The patch increases HEAPMEM size.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
The LNL board does not use DMA_DW driver, so the board
file should not set any build options specific to that
driver.
This fixes build warning:
--cut--
warning: DMA_DW_SUSPEND_DRAIN (defined at
drivers/dma/Kconfig.dw_common:27, drivers/dma/Kconfig.dw_common:27,
drivers/dma/Kconfig.dw_common:27) was assigned the value 'y' but got the
value 'n'.
---cut--
Link: https://github.com/thesofproject/sof/issues/8356
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Logging with probes was not implemented. This implements
ipc that enables logging with probe configuration.
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
Now that Intel cAVS2.5 has been migrated to use native Zephyr
drivers, we have no need to keep the Intel specific XTOS
drivers in the tree anymore.
Adjust board configuration files to not refer to removed
Kconfig options.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The IPC3 build is no longer supported for Intel cAVS2.5 target,
so move the config overlay definitions as-is to the main
board config file.
To smoothen the transition, keep an empty IPC4 overlay file
in the tree to allow developers to update build scripts.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Enables extraction and injection probes for MTL platform.
NOTE: this commit does NOT enable probe log backend.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Zephyr turns on by default CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE option
what causes Devices using Zephyr Device System Power Manager to
be ignored during SoC power transition. Disabled this option so we
can use default Zephyr kernel behavior to shut down Devices.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
We plan to get rid of mimx93_evk_a55_sof board and use the
generic mimx93_evk_a55 board + overlays.
This patch adds the config fragment to enable mimx93_evk_a55 board for
SOF.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
We will use SOF app with default mimx93_evk_a55 board on top
of which will add necessary adaptations.
e.g we will define SOF required memory areas in the overlay
and will get rid of mimx93_evk_a55_sof board.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
The config CONFIG_LOG_FUNC_NAME_PREFIX_xxx is only
enabled for ACE platforms and INF log level, and the
timestamp used is different on TGL and MTL, which
is not quite consistent.
This patch make sure the log format is consistent
among platforms and log levels.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
We need to enable CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_MIN according to
comments in coredump_core.c: When dumping minimum information, the
current thread struct and stack need to be dumped so debugger can
examine them.
Signed-off-by: Rander Wang <rander.wang@intel.com>
some platforms don't use Zephyr, therefore they can't
use DP scheduler. Add a config option
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Remove all support for cAVS 2.0 platformsm including Ice Lake and
Jasper Lake, they aren't supported any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for cAVS 1.8 platformsm including Cannon Lake,
Comet Lake, Whiskey Lake and Coffee Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for cAVS 1.5 platformsm including Apollo Lake,
Sky Lake, Kaby Lake, Broxton and Gemini Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
L3 memory should support have support
for allocating/freeing memory
A heap support in L3 is introduced by
this commit
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Add
- a kconfig option enabling a heap in L3
- a memory capability flag SOF_MEM_CAPS_L3
+ small cleanup in whitespaces
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Updated zephyr to the latest version with
the necessary patches
a requried kconfig option is added because of
https://github.com/zephyrproject-rtos/zephyr/pull/51738
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Necessary configuration options of the mtl board
have been enabled.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Fabiola Kwasowiec