System reset occurs after returning from AsmEnableAvx() in Stage1A.c
because ebx register is used for cpuid, but not restored.
- Save/Restore ebx register
- Move AsmEnableAvx () after init idt and serialport
Signed-off-by: Aiden Park <aiden.park@intel.com>
The previoius IPP library updates used UpdateSHA256V8 as default for
SHA256. It works on real platform. However, QEMU's default CPU config
does not support SSE3 instructions and will generate exception. This
patch added the UpdateSHA256Compact as default SHA256 function if no
advanced optimization flags are set. The same is applied for SHA512
functions too.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
AVX(G9) and SSE4(W7) is added to IPP crypto lib.
PcdCryptoShaOptEnabled is added to enable optimzations
in IPP SHA256 and SHA384.
Default is set to V8 (SSE3) for SHA256. ENABLE_CRYPTO_SHA_OPT has to
be configured in Platform board config files for optimizations
to be enabled.
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
EnableAvx ASM is included as part ExtraLibs.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
This will fully support PatchCheck.py.
- Remove all trailing whitespace
- Convert LF to CRLF by default
- Update EFI_D_* to DEBUG_*
- Re-enable CRLF check in PatchCheck.py
Signed-off-by: Aiden Park <aiden.park@intel.com>
By adding an additional flag for the pre-OS
checker execution flow it is possible to determine
at run time whether to attempt loading/execution
of the pre-OS checker during OS Loader time. From
platform code the decision to attempt to run the
pre-OS checker can be controlled.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
PcdDebugInterfaceFlags and PcdDebugOutputDeviceMask are defined
for debug devices, so removed PcdDebugInterfaceFlags.
Add a new PCD PcdDebugPortNumber to indicate the serial debug
number.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Current SBL does not check the FSP Notify API return status. As a
result, if reset is requested, it is ignored by SBL. This patch
added FSP reset request check for FspMemoryInit, FspSiliconInit and
FspNotifyPhase.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current SBL has platform specific GetBuiltInConfigData() implementation
because the internal CFGDATA blob is embedded into Stage1B data section.
Instead, it can be put into Stage1B FV FFS file, and then use a PCD to
get the base. In this way, it can be handled directly in core code and
remove platform specific implementation.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
SerialPortLib sets UART Scratch Register to a known value at the first
initialization to avoid unnecessary re-initialization afterward. But,
one of Windows driver(SIO) re-configures UART Registers while the Scratch
Register is preserved. As a result, SBL skips serial port initialization
after restarting from Windows.
Therefore, force to initialize Serial Port at Stage1A all the time simply.
Signed-off-by: Aiden Park <aiden.park@intel.com>
This provides basic insertion sort API for Linked List. As part of change,
this insertion sort is used for PCI BAR calculation by its alignment
and for shell commands list by its name.
Signed-off-by: Aiden Park <aiden.park@intel.com>
While trying to boot all boot options, some allocated memory are not
de-allocated properly. To avoid memory leak while booting next boot
options, OsLoader will track all image data and free the unnecessary
memory at failing to boot current boot option.
Tested and verified with
- Traditional linux image on debug build
- IAS type image
- Container type image
- MultiBoot image
- BootSlot (A/B Boot)
- Trusty image
Signed-off-by: Aiden Park <aiden.park@intel.com>
OsBootOption config data provides addendum field to support multiple boot
option config data into a single boot option.
This patch updates a single boot option properly with multiple addendums.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Functionality to Crypto Hash function is guarded with an
PcdIppHashLibSupportedMask.
PcdIppHashLibSupportedMask indicates IPP crypto algo supported
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
There are multiple instances of sorting use case in SBL. For example,
memory map sorting and CPU APIC ID sorting. This patch added a generic
quick sort library to provide common sort API. As part of the change,
the quick sort API will be used for memory map and CPU APIC ID sorting.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
SHA512_384 and SM3 crypto functions were referenced from
https://github.com/intel/ipp-crypto.git
Selectively taken Ipp Hash methods
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
This allows 'fs ls' command to print directory or file lists to both serial
and display console according to CONSOLE_OUT_DEVICE_MASK.
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch will print a filename with 16 chars aligned size.
- left justified filename with padding up to 16 chars
- length of filename > 16 chars, full filename is printed as it is
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch updates function/APIs definition and comment syntax
with EDK coding convention.
- No functional changes
- Remove unused funtions
Signed-off-by: Aiden Park <aiden.park@intel.com>
This 'fs' shell command can be used for basic file system check.
Usage: fs init [device no.] [hwpart no.] [swpart no.]
fs close
fs info
fs ls [dir or file path]
- 'device no.' is from Platform Device Table.
- all 0s by default if 'fs init' has no parameters
- root dir by default if 'fs ls' has no dir or file path
Signed-off-by: Aiden Park <aiden.park@intel.com>
"MM" SBL Shell command can be used to dump PCI configuration space
registers. On the other side, "PCI" command can be used to list all
PCI devices. This patch enhanced "PCI" command to support PCI
configuration space dump by redirecting it to "MM" command internally.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The 'mm' (formely 'mem') command is being
updated to handle PCI device formatted
addresses and also to support IO device
interfacing. Removing the 'io' command too
since it has been intergrated into the 'mm'
command.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The 'boot' command is making use of a global
variable declared in the OS Loader but it might
not always be available if the Shell lib is
used with other code. This patch removes the
dependency on the global variable.
Also fixes a small issue with not providing a
value at the prompt; instead prompt the user
with a error message when no valid value has
been provided.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
This patch allows OsLoader to handle all Boot Options without restarting.
Currently, OsLoader restarts to handle next Boot Option from the beginning.
This behavior does not preserve allocated memories from Payload heap,
so it makes hardware/software states hard to be maintained.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Since SBL shell added support for command line history. It is required
to support it from USB keyboard console as well. This patch added USB
keyboard arrow key handling to convert arrow key scan code into ANSI
escape sequence so that Shell can recognize the arrow key from keyboard.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added command line history upport in SBL Shell. It makes
it easy to run a previous command using Up/Down arrow key.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Split PreOsChecker in a separate file and add minimum APIs
- IsPreOsCheckerLoaded ()
- LoadPreOsChecker ()
- StartPreOsChecker ()
Token space has been changed for PcdPreOsCheckerEnabled
- gPlatformModuleTokenSpaceGuid to gPlatformCommonLibTokenSpaceGuid
- Include/Excluded PreOsChecker according to FeaturePcd
Signed-off-by: Aiden Park <aiden.park@intel.com>
The 'boot' command is resetting the current
boot option to be option zero any time the
command is invoked which conflicts with the
'c' command which allows a user to select the
next boot option that should be tried. Remove
the resetting to resolve the issue when doing
'c' sub-command in the 'boot' command.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The 'boot' command has been updated to add
an option to update the current boot option
to be booted next, e.g. mCurrentBoot. To
change the current boot option just need to
run 'boot' and then select 'c' and the
index to change the current boot option to.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The OS Loader 'boot' shell command does
not allow a user to skip data entry for
a given input field which can be tedious.
To make it easier allow users to press
enter to re-use the current value for
the boot option being modified to skip
to the options that they actually want
to update.
Also remove the '-a' option, no one will
typically re-enter all of the boot options.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
This patch allows platform to degrade eMMC HS400 to HS200 using
static configuration. To do this, please add the following into
BoardConfig.py:
self.ENABLE_EMMC_HS400 = 0
This is useful when platform has hardware issue to run at eMMC
HS400 mode.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added csme wrapper driver for csme update library.
following functionality is added in this patch
1. Boardconfig PCD option ENABLE_CSME_UPDATE is added to
enable/disable csme update support
2. Boardconfig PCD option BUILD_CSME_UPDATE_DRIVER is added
to enable/disable building csme update driver
3. If BUILD_CSME_UPDATE_DRIVER is 1, user need to create
library that inludes csme update library
this newly created library will get linked to csme update
wrapper driver providing csme update driver
4. By default ENABLE_CSME_UPDATE is set to 0
5. Revision control for input and output data structure to
update driver is not implemented and will be avaiable
in further patches.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
This patch added basic deinit support in the media DevInit() interface.
It uses a special DevDeinit phase to inform the media driver to do
device de-initialization. This de-initialization flow will be called
before OsLoader restarting and OS booting.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
When USB keybaord input console is enabled, current code will keep
sending interrupt transfers to poll the USB keyboard state. However,
according to USB spec, it needs to be polled at certain interval
returned by the device. If the polling rate is too high, sometime,
host will fail to schedule the SPLIT transfer. This patch adjusted
the polling rate to the required interval.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch fixed the pointer check before de-allocating memory
previously allocated for AHCI controller.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The EXT library has some unused code that
we can remove to help reduce the size and
to clean things up some more. Also add a
routine for dumping the group descriptor
table which can be helpful for debugging
issues.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
EXT2/3 library has some limiatation to support
hardware block sizes larger than 512 (e.g. 4KB)
and also does not currently support the flag
INCOMPAT_64BIT which indicates larger group
descriptor sizes. This patch adds flexibility
to support 512 and 4KB block sizes as well as
64bit EXT file systems.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
This patch switched to use SerialPortLib in BootloaderCommonPkg for
QEMU and CFL platforms. For APL platform, it can also use this common
library. However, it has an optimized SerialPortLib with FIFO enabled.
So for APL, it still uses its SOC specific library.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The common SerialPortLib in BootloaderCommonPkg is not used by anybody.
This patch re-implemented this library to align with the SOC specific
implementation. The intention is to use this common library to replace
SOC specific implementation.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added common API interface for GetTimeStampFrequency.
Since all current IA platforms have standard way to get the TSC
frequency, it is better to move it into common lib.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The latest code has debug message output issue. It is caused by
the following CommitId: 56867c3bc6.
This patch provided proper fixes for this issue. The root cause
is due to incorrect string length.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
USB sub-system will have host controller scheduling frames on its
own once it is initialized and enabled. Leaving it running while
payload restarting or OS booting could potentially cause memory
corruption since the DMA might still be running on the background
targeting to previously allocated memory. The safer approach is
to stop the USB controller.
It also fixed#351.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
SBL allows debug message to be redirected to output console besides
the serial port. However, serial port itself could be part of the
output console device as well. In this case the debug message will
be printed twice. This patch added check to this condition and skip
the redundant print.
It fixed#349.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current SBL USB keyboard driver cannot handle the key input nicely.
If typing is too fast, some chars will be missing. On the other side,
sometimes singe key press will generate multiple repeated chars.
This patch reimplemented the logic to detect key press/release using
similar flow as EDK2 UsbDxe driver. With this logic, USB keyboard
worked pretty well. It has been tested on APL platform.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current SBL code will assert if HAVE_VERIFIED_BOOT is 0. This patch
added check for PcdVerifiedBootEnabled to decide if IAS verification
is required.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Add support to load the boot image from container.
Container must be signed using the same private key
as the key used to sign IAS (i.e. IAS_PRIVATE_KEY).
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
- 'OpenFile may be used uninitialized' in ExtLib
- 'undefined reference to memcpy' in FatLib
- 'Lasa/Laml may be used uninitialized' in TpmLib
- 'Adjust may be used uninitialized' in Stage2Support
Signed-off-by: Aiden Park <aiden.park@intel.com>
Add GetNextAvailableComponent() and authenticate the
components after registering them in CONTAINER_LIST.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
To assist source level debug, it is better to always load PE/TE images
at page aligned memory address so that the script can locate the image
much easier. This patch changed the AllocatePool to AllocatePages for
component loading inside a container.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch provides the basic infrastructure to add a
Debug Port Table 2 (DBG2) to specify one or more ports
for debugging purposes. More info reg DBG2 @ :
https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn639131(v=vs.85)?redirectedfrom=MSDN
If the platform wants to report a debug port to Windows,
it should patch the DBG2 template provided with the
corresponding debug port information. And this updated
DBG2 must be referenced in RSDT.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
By design, BootloaderCommonPkg should not refer to
BootloaderCorePkg. Hence removed those references in
the .inf files in Common pkg.
Moving SmbiosInitLib to Core pkg as it is a core feature.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
Users might want to have some parameters that can be set
from UEFI environment. UEFI NVRAM variables provide a way
to achieve this functionality. And they require these vars
to be read from bootloader.
This patch provides a library to get read access to the
UEFI variables stored in NV region. The driver was ported
from MdeModulePkg\Universal\Variable\Pei @ EDKII Open Source.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
There is a small bug in the ContainerLib
where the check for whether the data is
stored in the flash needs to be adjusted.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
Update TpmType to LoaderPlatform info hob based on
Type updated in Platform Info. LoaderPlatformInfo revision
is updated.
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
This patch splitted LoadBzImage() into two functions. One is just
for kernel loading. The other one UpdateLinuxBootParams() is for
Linux boot parameter updates. It is required to do so because when
kernel loading in Stage2 is enabled the loading occurs before all
HOBs are finalized. The Linux boot parameters depend on HOBs to fill
correct information, such as frame buffer. With this patch, the boot
parameters can be updated at the very end.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current SBL code depends on PixelInformation to fill kernel
framebuffer parameters. However, this info is only valid if
PixelFormat is PixelBitMask type. Since FSP will only produce
8bit per pixel format, it is better to use PixelFormat to
determine the pixel bit size and position information. This
patch added this logic. It also fixed#260 .
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
OsLoader has the capability to boot a Linux kernel. However, to support
LinuxBoot type of payload, it is required to load kernel in Stage2. This
patch abstracts the standard Linux loading logic into common LinuxLib
class so that it can be linked in Stage2 or Payload such as OsLoader.
A new PcdLinuxPayloadEnabled is introduced to control if this feature
should be enabled or not.
To boot a Linux kernel from Stage2, it is required to put the command
line file and kernel image into the EPAYLOAD container during the build.
And the PayloadId CFGDATA needs to be set to 'LINX'.
For example:
python BuildLoader.py build qemu
-p OsLoader.efi::Lz4;vmlinuz:LINX:Dummy;cmdline.txt:CMDL:Dummy
vmlinuz and cmdkube.txt need to be copied to PayloadPkg/PayloadBins
folder. If kernel size cannot fit into EPAYLOAD, EPAYLOAD_SIZE in
BoardConfig.py needs to be adjusted accordingly.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The current implementation used a huge array to represent boot options in
a single CFGDATA tag. With this approach, when a different board needs
to modify a single field, the whole array needs to be duplicated in the
CFGDATA. It is not efficient. A better approach is to break the options
into individual boot option CFGDATA tag. It will reduce the overall CFGDATA
in general. This patch implemented this mechanism. A library interface
FillBootOptionListFromCfgData() is provided to convert the CFGDATA into
the required OS_BOOT_OPTION_LIST.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Since OsLoader will restart from beginning and all memory will be
reclaimed, it is required for Shell library to re-initialize the
global varaibles, for example, command list. Otherwise, the old
memory pointer will be used and cause issues. This patch added the
link list re-initialization in Shell lib. It fixed#253.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Currently, all shell commands are statically defined in header file.
Add shell command registration API to allow include/exclude shell
commands dynamically.
Later, some debug shell commands will be added according to build
mode or debug mask.
- TBD: Sorting shell commands by name
Signed-off-by: Aiden Park <aiden.park@intel.com>
Currently, Ext23Lib accesses device index 0 only.
It must access proper hardware partition when reading blocks.
- Reproducible with QEMU which has SATA port 5
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch enabled container use case for EPAYLOAD loading.
It also switched to use LoadComponent() API for Stage2 and
payload loading. It simplified the code flow. An example in
QEMU was added to demonstrate on how to add a container in
build and load it in Stage2 code.
To define a container layout, it is required to provide
GetContainerList() in BoardConfig.py. Then in stage or payload
code, LoadComponent() can be used to load a component from the
container.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Mender is an A/B partitioning scheme
for Linux OSes. Adding initial support
for specifying the root partition label
that should be used. Later on the root
partition label should be acquired based
on the value of the env files stored in
the EFI/FAT32 partition of the boot media.
Also fix misspellings.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
Since HASH_INDEX_* is a 1:1 mapping with
COMP_TYPE_* we can remove HASH_INDEX_* and
replace with COMP_TYPE_*.
Also fix some misspellings.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
Recent update to DoHashVerify routine is no longer
working for HASH_INDEX_PAYLOAD_DYNAMIC (ex. UEFI
Payload). Need to add COMP_TYPE_PAYLOAD_DYNAMIC
and increase COMP_TYPE_INVALID to resolve the
issue.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
This patch added a ContainerLib to support load and location a
component from a specified container. It copies the component
from flash to memory, authenticate it, and then decompress it if
required. It can also be used to support load component from flash
map in SBL stage2 or payload, such as payload or e-payload.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
SBL only support ELF type: EXEC (Executable file)
This changes also allow loading ELF type: DYN (Shared object file)
This is required to boot recent ACRN Hypervisor.
Signed-off-by: Markus Schuetterle <markus.schuetterle@intel.com>
There are cases where temporary memory is required in stages. Since
MemoryAllocationLib instance for stages has no de-allocation function,
it needs special handling. This patch added temporary memory management
into standard MemoryAllocatoinLib interface.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
When writing flash in SMM mode, some platform need disable SMM write
protection. when this flag is set, it means this platform need disable
SMM write protection.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Currently there is some limitation with mounting an
EXT4 partition to retrieve a file for booting when
the partition was not properly umounted during the
previous usage (ex. powering off an OS without
using 'poweroff' command, unplugging power, etc.).
There is no recovery support in the Ext23Lib but
as a temporary solution we can ignore the recovery
bit to avoid boot issues when the recovery bit is
flipped due to unexpected power loss.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
If the platform provides an empty or a NULL string,
Smbios type might end abruptly and the Types are
reported incorrectly.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
When determining which extent node to fetch
the filesystem block address from for a file's
data we should count from block 0 of the file
and when we enter into a non-zero extent node
we need to subtract the starting block number
from the file block number we are looking for
so that we don't skip over any blocks.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The previous implementation has a little confusion in license header.
To avoid further annoying, simply re-implement ElfLib.
- 32bits, little-endian, executable elf only supported
- elf32.h/elf_common.h from BaseTools/Source/C/GenFw
- LoadElfImage() interface changed
Signed-off-by: Aiden Park <aiden.park@intel.com>
The current EXT2/3 library does not support EXT4 partition
reading namely due to a limitation with handling extents
instead of block maps within an I_node's I_block data.
There is a todo currently to support 48-bit logical block
addressing, the code currently does not support reading
larger than 32-bit addresses; throw an ASSERT if upper
16-bits are non-zero.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
Current SBL does not call board ReadyToBoot & EndOfFirmware phases
in Stage on normal boot flow. Current open source UEFI payload does not
do it either. It caused some security concerns. The patch enforced
these notification calls on normal boot flow in SBL for all payloads
except for those that can handle board and FSP notification on its own.
It fixed#191.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
On WHL, if using Boot Guard profile 0, booting from BP1 will be
significantly slower than BP0. It is because some code region in BP1
is not covered by MTRR cache settings. This patch adjusted MTRR
settings during PostTempRamInit notification to cover full flash
code region if Boot Guard profile 0 is used.
It fixed#188.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
In current FAT lib, the file path matching code will just compare
the 1st N chars and ignored the remaining. The end of the string
should be checked to ensure exact matching. As part of this fix,
the GRUB config parsing library needs to be updated since the file
name length field is one less than expected.
It fixed#183.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Synced up MdePkg, IntelFsp2Pkg and BaseTools to EDK2 stable tag
edk2-stable201905.
There are several changes for MdePkg and BaseTools.
MdePkg:
- Support light print to reduce SBL size
MdePkg\Library\BasePrintLib\PrintLibInternal.c
MdePkg\Include\Library\DebugLib.h
- TCG TPM2 spec changes and remove dependencies
MdePkg\Include\IndustryStandard\UefiTcgPlatform.h
MdePkg\Include\IndustryStandard\Tpm2Acpi.h
- Use old NVM protocol file
MdePkg\Include\Protocol\NvmExpressPassthru.h
- Removed unused files
BaseTools:
- Added LZ4 support
- Removed unused files
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Cleaned up SpiFlashLib in APL platform, and move it into
BootloaderCommonPkg, so that other platform could reuse
this SpiFlashLib
Signed-off-by: Guo Dong <guo.dong@intel.com>
Common MM_PCI_ADDRESS() provided PCI device BDF to PCIE MMIO base address.
So remove MmPciAddress() and MmPciBase () defined in platform and update
code to use MM_PCI_ADDRESS().
Add TO_PCI_LIB_ADDRESS() in common library.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Currently when providing a filepath with sub-directories
the EXT2/3 library is not able to locate the file. The
code for traversing sub-directories is already present
but was not enabled. This change enables this support.
Ex: 'boot/iasimage.bin'
Signed-off-by: James Gutbub <james.gutbub@intel.com>
FileSystemLib provides generic interfaces to access file system and
its files as a abstraction of FatLib/ExtLib.
- Added CloseFileSystem
If there are opened files in a specific filesystem, those files
will be de-allocated in CloseFileSystem.
- Added OpenFile/GetFileSize/ReadFile/CloseFile
The ReadFile() does not allocate any memory for the file content.
The caller of OpenFile() MUST allocate necessary memory before
calling ReadFile().
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch will add support for updating multiple firmwares
using a single capsule image.
Following modifications are made for existing firmware update flow
1) Gather and validate capsule image
2) State Machine will be set to capsule processing state.
3) Signature of the capsule image is now stored in reserved region
During each reboot until the end of firmware update, stored signature
will be compared against the capsule image signature to make sure
capsule image is not modified until the end of firmware update.
4) Process Capsule image to gather firmware images
5) Each Firmware image information will be stored in reserved region
using FW_UPDATE_COMP_STATUS. Update pending will be marked to
update pending state indicating that this image is not processed.
6) Firmware update will use the reserved region comp structures starting
with the first image with update pending state, update the comp update
pending field to processing and applies the image. After the update, pending
field will be updated to Done and updates the status of the update in the
component structure and moves on to next image found.
7) After all the component structure in the reserved region updating pending
field are set to Done. Firmware update mode is exited.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
The FindPartitions() allocates memory for PART_BLOCK_DEVICE instance.
This allocated memory needs to be de-allocated if no more necessary
to avoid memory leak.
TBD: Current partition info needs to be cleared before going to next
boot option.
Signed-off-by: Aiden Park <aiden.park@intel.com>
- CMD23(SET_BLOCK_COUNT) is for only MMC.
- CMD17(READ_SINGLE_BLOCK) must be used when reading a single block
with SD card
Signed-off-by: Aiden Park <aiden.park@intel.com>
Current implementation of splashing a BMP image to the
display requires the allocation of a temporary buffer
to store the BMP image into a GOP Blt friendly format
that can then be used to splash the image to the display.
Instead of using a buffer for the whole image we can
allocate a smaller buffer to splash one line at a time
since splashing is already performed one line at a time.
Also fix a small print message regarding frame buffer
format.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
For SATA boot option, the hardware partition is mapped into AHCI
port. Current implementation requires a specific AHCI port in order
to boot from that hard drive. This patch added support to boot
from the first detected AHCI port when the hardware partition is
set to 0xFF.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
TE image has stripped header to reduce the image size. When calculating
the preferred base for TE image, the gap should be added back in order
to match the actual TE image base. This patch fixed#133.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Removing the HOB defined by SBL to use generic HOBs from EDK2.
Update GraphicsLib for above HOB change.
Update osloader and multibootLib for hob change.
update APL and Qemu platform for hob change.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Current SBL depends on GEN_CFG_DATA.PayloadId to determine which payload
to boot if multiple payloads exist. With this patch, when PayloadId is
set to "AUTO", QEMU will use the QEMU command line parameter
'-boot order' to determine which payload to boot.
For example, adding '-boot order=dba' in QEMU commadn line will boot to
UEFI payload. This provides a simple way to test different payloads using
the same SBL image.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added support for FWST ACPI table. This table
contains generic address structure which has pointer to the
EFI System Resource Table.
ESRT table for now supports only system firmware. This table
will provide the operating system and tools knowledge of what
is the last attempt status and version of the system firmare
update.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
This patch enabled DISABLE_NEW_DEPRECATED_INTERFACES build option by
default so that the deprecated APIs cannot be used in SBL source tree.
It is to enhance the coding for security.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Multiboot defined framebuffer structure. However, it was not
implemented in SBL. This patch added this support by filling in
the framebuffer information into the multiboot table.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch enhanced the FAT library to support long file name. The
old driver only supports 8.3 short name. Combined with FAT full path
support, the FAT library now can load any file from the partition.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Smm bases for all the procs need to be relocated on the
S3 resume path (as payload is not run) for Windows boot.
Signed-off-by: Sai Talamudupula <sai.kiran.talamudupula@intel.com>
Current FAT library can only support loading file from the root
directory of FAT file system. This patch enhanced it to support
load file from FAT file system with any give full path. Both unix
and Windows style path are supported. For example, "efi\boot.cfg",
"\efi\boot.cfg", "/efi/boot.cfg", etc, all are valid path string.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
LOADER_GLOBAL_DATA.LdrFeatures is updated in early stages and
subsequent stages could use these flags.
LOADER_PLATFORM_INFO.LdrFeatures is used to for feature updates
and this need to be checked by loader and payloads.
LOADER_PLATFORM_INFO.HwState for Hw supported features as
Boot guard profiles.
Signed-off-by: Subash Lakkimsetti <subashx.lakkimsetti@intel.com>
This patch did some clean up for LiteFvLib and LitePeCoffLib. It
also moved LoadFvImage() API from Stage2 core code into the LiteFvLib.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Previously SBL expects UEFI payload entrypoint and base at
hardcoded address of FV header. With this patch, SBL could
parse FV to get these info.
TEST=Tested on Leafhill and boot UEFI payload success.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Build a new SMM info HOB to payload to report SMM info.
Add UEFI payload variable region into flash map.
TEST=Tested on LeafHill with UEFI payload.
Signed-off-by: Guo Dong <guo.dong@intel.com>
The current USB block read library trancated the number of blocks
to read from UINT32 to UINT16. It caused read issue for large file
on USB disk. This patch fixed#63. It has been verified on LeahHill
CRB platform.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
When InitFileSystem() API is given EnumFileSystemTypeFat in argument,
the FAT file system is not initialized. This bug is discovered when
firmware update payload fails to load capsule from FAT partition via
shell interface.
Fixed#62
TEST=Created FwuImage.bin and perform firmware update from SBL shell on
UP2 board. Verified successful update and booting to Ubuntu 16.04
from eMMC
Signed-off-by: Huang Jin <huang.jin@intel.com>
The patch gives the platform the configuration capability to only build
required file system into final image.
This helps to have a smaller image for fast boot.
Signed-off-by: Guo Dong <guo.dong@intel.com>
This patch updates firmware update code to get capsule location
information from configuration data instead of searching in all the
available boot media.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
There are 'uninitialized' errors and size exceed error in PAYLOAD
with old gcc versions. This change has been verified with gcc-4.8,
gcc-5, gcc-7 and gcc-8 on Ubuntu 18.04 LTS.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Current code refers hash store as "key store". It is confusing
since there is no key stored in the image at all. Instead, the
public key hash is stored. The patch renames the KeyStore
to HashStore.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This reverts commit 8cba382774.
The original fix still has the issue on Windows UDK Debugger and
a simpler way can resolve the QEMU specific issue. In UDK debugger
configuration, 'NoAccessLimit = 0' is required for QEMU only.
[Target System]
NoAccessLimit = 0x0
This change has been verified on both Linux and Windows UDK Debuggers
and user guide will include this information.
Change-Id: I09de713d7a9a892230475cbc4aca70b1a5c11b3c
Signed-off-by: Aiden Park <aiden.park@intel.com>
QEMU FSP reports that CAR base is 0x0, but DebugAgent cannot access
the memory space since MEMORY_READY is not set.
In order to disable low memory filtering, simply check CAR space and
then trigger MEMORY_READY.
Change-Id: I9e1703215c95fd64e2a0be3afd001c59f736e81b
Signed-off-by: Aiden Park <aiden.park@intel.com>
In order to support ELF format payload in Stage2, ElfLib is separated
from MultibootLib.
Additionally,
- Load ONLY Executable/Loadable segments
- Keep LoadElfSymtab function for future use
- Mark ELF syms flag as 'not supported' in MultibootInfo
Change-Id: Iec1ca6770ffeff9222b71327216cc6176ea1e925
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch adds a new shell command `dmesg` to print out the contents of
the boot log buffer.
Signed-off-by: Borgerson, Matthew A <matthew.a.borgerson@intel.com>
Previous USB keyboard console support commit worked fine on APL real
platform, but it has issue on QEMU. This patch further enables USB
keyboard console support for QEMU. A new PcdUsbKeyboardPollingTimeout
is added. It will be used to control the USB keyboard interrupt
transfer polling timeout. For QEMU, it needs a larger number due to
timing issue. As part of it, booting from USB device is also enabled
by this patch. This patch fixes#30.
To test USB keyboard console in QEMU, please first change
CONSOLE_IN _DEVICE_MASK in BoardConfig.py to 3, and then add the
following in the QEMU command line to add XHCI controller and USB KB:
-device qemu-xhci,id=xhci,bus=pcie.0,addr=4 -device usb-kbd,bus=xhci.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch simplifies the GraphicsLib code and adds an abstraction layer
for printing to a virtual "console," through the familier
ConsoleWrite(buffer, len) style function call.
ConsoleWrite can be configured to output to either the serial port, or
the display framebuffer, or both. This primarily enables the command
shell to be used with a display and keyboard.
Signed-off-by: Borgerson, Matthew A <matthew.a.borgerson@intel.com>
Current XHCI library does initialization without checking the
controller PCI class and interface type. It will cause assertion
in late phase if the device is not a real XHCI controller. This
patch added the class and interface type check for XHCI controller.
Also more error handling was added to deal with the initialization
failure.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
* Enable DebugAgentLib to support source level debug over serial
By default, source level debug is NOT enabled. ENABLE_SOURCE_DEBUG
needs to be set to 1 in BoardConfig.py of each Platforms.
- self.ENABLE_SOURCE_DEBUG = 1
As an initial drop, there are some limitations on APL platform.
- Stage1A does not include DebugAgentLib due to Stage1A size
limitation(32KB). Further optimization is required.
- DebugAgentLib supports ONLY POSTMEM debugging on APL currently.
Refer to EDKII Debugging:
- https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Debugging
- https://github.com/tianocore/tianocore.github.io/wiki/SourceLevelDebugPkg
Change-Id: Ia28c5470bc5755768f2b380cc1dabbcb8ee60f0d
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Additional changes for DebugAgent
- Adjust stage size depending on ENABLE_SOURCE_DEBUG Pcd value
- Add PeCoffFindAndReportImageInfo
- Fix debugger hang at Shell
Change-Id: I11b41e5ad610fcb2999e9d43e5dd8f8899e8265a
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Move PeCoffFindAndReportImageInfo() from LitePeCoffLib to DebugAgentLib
Change-Id: I2c4ab4f9561dfd0536da1820048f0e5f2660e2ab
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch implemented USB keyboard library and added it as an
input console device. It can be enabled by setting BIT1 in
self.CONSOLE_IN_DEVICE_MASK in BoardConfig.py. By default, it
will be disabled for performance and size consideration.
Test has been done on APL Leafhill board. USB keyboard can work
in Shell.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current implementation assumes serial port is the only input console
device supported. But other input console devices can be added later
on. This patch added a ConsoleInLib to abstract the input console
interfaces. It also added PCDs to control enabled input console
devices.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Aiden Park