Rename mmu_add to pgtable_add_map;
Rename mmu_modify_or_del to pgtable_modify_or_del_map.
And move these functions declaration into pgtable.h
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add the 'hvdefconfig' as a pre-requisite before building the hypervisor.
This solves the problem when using multiple parallel threads (i.e.
"make -j2").
Tracked-On: #5874
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
A scenario can enable multiple IVSHMEM_REGIONs, loosen the restriction
to extend multiple regions support.
Tracked-On: #5863
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The 'iasl' binary (from the acpica) package can be installed in
different locations depending on the distribution. By default,
we look for it under '/usr/sbin/'. But it is also often found
under '/usr/bin'. This can be overwritten by setting the ASL_COMPILER
flag when compiling ACRN.
This patch goes one step further and automatically determine where
'iasl' is on the development system if the ASL_COMPILER variable
has not been set already.
Tracked-On: #5854
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The creation of the acrn_manager ('acrnctl') configuration folder
is currently done when adding a new VM to the system. This leads to
an error (non-fatal) thrown on the terminal is calling, say 'list'
first without having added a VM yet. This patch moves the creation
of such folder as part of main() thereby ensuring it is created as
soon as the program starts.
Tracked-On: #4898
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In VT-d scenario, if MSI interrupt has been enabled,
vCPU writes the content in MSI registers,
and all bits of the content are read-only.
In this case, hypervisor code will call
enable_disable_msi(vdev, false), which will disable MSI.
And there's no chance to call remap_vmsi.
This is wrong behavior, which will result in the disable of MSI.
Tracked-On: #5847
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Signed-off-by: liujunming <junming.liu@intel.com>
Some functions that were in arch/x86/irq.h were moved
into common/irq.h and arch/x86/guest/virq.h.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
A new x86/guest/virq.h head file now contains all guest
related interrupt handling API.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each of them now resides in a separate .c file.
Tracked-On: #5825
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Move exception stack layout struct and exception/NMI handling
declarations from x86/irq.h into x86/cpu.h.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The common irq file is responsible for managing the central
irq_desc data structure and provides the following APIs for
host interrupt handling.
- init_interrupt()
- reserve_irq_num()
- request_irq()
- free_irq()
- set_irq_trigger_mode()
- do_irq()
API prototypes, constant and data structures belonging to common
interrupt handling are all moved into include/common/irq.h.
Conversely, the following arch specific APIs are added which are
called from the common code at various points:
- init_irq_descs_arch()
- setup_irqs_arch()
- init_interrupt_arch()
- free_irq_arch()
- request_irq_arch()
- pre_irq_arch()
- post_irq_arch()
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This is done be adding irq_rsvd_bitmap as an auxiliary bitmap
besides irq_alloc_bitmap.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The common IRQ handling routine calls arch specific functions
pre_irq_arch() and post_irq_arch() before and after calling the
registered action function respectively.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The common part initializes the global irq_desc data structure while the
arch specific part initialize the HW and its own irq data.
This is one of the preparation steps for spliting IRQ handling into common
and architecture specific parts.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Arch specific IRQ data is now an opaque pointer in irq_desc.
This is a preparation step for spliting IRQ handling into common
and architecture specific parts.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The 'uart=' parameter for the hypervisor takes multiple forms. One
is to specify the BDF (Bus, Device, Function) value of the serial
port PCI device. The description in the documentation used the
previous format (e.g. '0:18.1') but a 16-bit WORD in HEX needs
to be passed nowadays. E.g.: '0:18.1' is specified by 'uart=0xc1'
Tracked-On: #5842
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: Benjamin Fitch <benjamin.fitch@intel.com>
The ACRN buid system uses 'xmllint' which is provided by the 'libxml2-utils'
package on Ubuntu. This patch adds it to the list of build and development
packages to be installed on the build system to succesfully build ACRN.
Tracked-On: #5861
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
"is_tpm_passthru" would always return "False" with the existing logic.
1. Replace "get_leaf_tag_map_bool" with "get_leaf_tag_map". Instead returning a dictrionary with boolean diction values, just get the string value.
2. Return "True" if any vm has enabled the passtrhough tpm with option "y".
Tracked-On: #5710
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
"PTDEV_HI_MMIO_START" is removed by the commit
8d9f12f3b7.
Replace "PTDEV_HI_MMIO_START" with "HI_MMIO_START".
Tracked-On: #5693
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch moves pgtable definition to pgtable.h and include the proper
header file for page module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the EPT page table related APIs to ept.c. page module only provides APIs to
allocate/free page for page table page. pagetabl module only provides APIs to
add/modify/delete/lookup page table entry. The page pool and the page table
related APIs for EPT should defined in EPT module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Move the MMU page table related APIs to mmu.c. page module only provides APIs to
allocate/free page for page table page. pagetabl module only provides APIs to
add/modify/delete/lookup page table entry. The page pool and the page table
related APIs for MMU should defined in MMU module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
We would move the MMU page table related APIs to mmu.c and move the EPT related
APIs to EPT.c. The page table module only provides APIs to add/modify/delete/lookup
page table entry.
This patch separates common APIs and adds separate APIs of page table module
for MMU/EPT.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
post_uos_sworld_memory are used for post-launched VM which support trusty.
It's more VM related. So move it definition into vm.c
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enhance the 'misc/Makefile' to improve readability by grouping the
tools based on whether these are `services` or `debug_tools`
(following the folders they're in) and also create separate build
folders instead of putting *both* services and debug_tools in the
build/misc/debug_tools folder (default value).
Tracked-On: #5793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Per-core software SRAM L2 cache may be flushed by 'mwait'
extension instruction, which guest VM may execute to enter
core deep sleep. Such kind of flushing is not expected when
software SRAM is enabled for RTVM.
Hypervisor disables MONITOR-WAIT support on both hypervisor
and VMs sides to protect above software SRAM from being flushed.
This patch disable ACRN guest MONITOR-WAIT support if software
SRAM is configured.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per-core software SRAM L2 cache may be flushed by 'mwait'
extension instruction, which guest VM may execute to enter
core deep sleep. Such kind of flushing is not expected when
software SRAM is enabled for RTVM.
Hypervisor disables MONITOR-WAIT support on both hypervisor
and VMs sides to protect above software SRAM from being flushed.
This patch disable hypervisor(host) MONITOR-WAIT support and refine
software sram initializaion flow.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Below boolean function are defined in this patch:
- is_software_sram_enabled() to check if SW SRAM
feature is enabled or not.
- set global variable 'is_sw_sram_initialized'
to file static.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The fields and APIs in old 'struct memory_ops' are used to add/modify/delete
page table (page or entry). So rename 'struct memory_ops' to 'struct pgtable'.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use default_access_right field to replace get_default_access_right API.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds explanations and examples of the makefile targets for hypervisor
configuration, including `hvdefconfig`, `hvshowconfig`, `hvdiffconfig` and
`hvapplydiffconfig`.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch modifies the instructions that lead users to modify predefined
scenario XMLs under ``misc/config_tools/data`` which is not a preferred
way. It is recommended to make and edit a local copy, instead.
Also fixes a few references to ``misc/vm_configs`` which has been moved.
v2:
* fix typos in paths
* explain on the candidate values of ``port_base`` and ``irq`` fields
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch reorganizes the sections in acrn_configuration_tool.rst for more
natural logic flow and removes step 3 (Auto-Code Generation) of the
configuration workflow which is no longer needed from user point of view.
v2:
- Refactor the sections to introduce the configuration concepts, workflow and
details in order.
- Align names of the components for ACRN configuration.
- Always use "scenario/launch configuration" rather than "scenario/launch
setting".
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Co-authored-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Users no longer need to explicitly generate configuration source code as
they are now generated at build time. This patch updates the relevant
instructions in the documentation.
v3:
* RELEASE now defaults to n.
* Cleanup the unnecessary target `all` in the `make` commands
* Remove menuconfig related stuff.
* Refine the introductory paragraph as only steps on Ubuntu is introduced
* Also introduce the targets introduced by PR #5791
v2:
* Add python3 lxml as a dependency
* Explain how to use out-of-tree XML files
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Co-authored-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Starting from v2.4, ACRN configuration uses solely XML files to store
configuration data and customized scripts to manipulate
configurations. This patch updates the HLD of compile-time configuration to
reflect this properly.
As the refinement to the configuration toolset itself is still ongoing,
this patch only adds brief introduction to the key generated files involved
in ACRN configuration. More details will be added after the refinement
completes.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Benjamin Fitch <benjamin.fitch@intel.com>
Fix incorrect information about the presence (or not) of a serial
port on Kaby Lake NUC platforms.
Tracked-On: #5812
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add the 'mmio@' parameter to the document describing all the possible
values for 'uart='. This is the command-line argument passed to the
hypervisor in order to overwrite and/or set the serial port.
Tracked-On: #5820
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add the capability to disable or enable #AC for Split-locked Access
through <scenario>.xmls. This was implemented through Kconfig. Move this
configuration from Kconfig to xmls.
Tracked-On: #5798
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add "--psram" in acrn dm arguments in launch scripts
when PSRAM_ENABLED=y and the VM is post-launched RTVM.
Tracked-On: #5649
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Li Fei1