Following up on d648df766c, surgically
remove all the functions related to enable_bar()/disable_bar() that got
introduced in 8787b65fde.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Add interface to get hardware information and
configurations for current platform.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update PCIR_SUBDEV_0 and PCIR_REVID in PCI configuration space to adapt
windows virtio-input driver. Otherwise virtio-input driver on Windows
will not be loaded correctly.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Guest OS for example Windows will disable bars before shutdown. Bars
are unregistered when they are disabled. Trying to unregister a bar
which has been unregistered causes a assertion. In pci_emul_free_bars
only those enabled bars should be unregistered.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACPI PM timer is disabled in FADT since there is no pm timer emulation
in device model now.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is found that windows will issue blkio operation with amount of
sectors in one request. This patch extends the max iov number of
virtio block to 256.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There is a deadlock when emulate_mem is called on the memory region
of PCI extended configuration space. The call trace is something like:
emulate_mem
-> pci_emul_ecfg_handler
-> pci_cfgrw
-> pci_emul_cmdsts_write
-> unregister_bar/register_bar
-> modify_bar_registration
-> unregister_mem/register_mem
mmio_rwlock is hold in emulate_mem when calling unregister_mem/
register_mem which is trying to acquire mmio_rwlock again, and deadlock
happened.
It is possible that bar address is changed just between a on-going
MMIO access which can bring a race condition in theroy. Guest needs to
take care of the serial operation between bar addess update and MMIO
access of that bar.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Sometimes guest OS writes PCIR_COMMAND register to disable the device,
then update the bar address followed by a write to PCIR_COMMAND register
to enable the device again. In this case unregister_bar/register_bar
should be called otherwise the IO/MMIO regions monitored by device model
will not be updated accordingly.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Windows will set 0x262a0 for smi cmd pio, need to mask the higher bits
due to smi command is 8 bits register. Otherwise, it cause the
ACPI_ENABLE case can't be matched, and windows expecting the SCI_EN of
PM1_CONTROL be set after switch to ACPI mode. Finally, cause windows
trigger panic.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch adds the support of inet socket as the backend of uart
emulation. Data written by guest uart is transferred to a socket and
data from socket is forwarded to guest uart. This enables something
called "Uart Over TCP" which is useful in some case such as WinDbg
connection over uart. The command line syntax is as follows:
-l comX,tcp:port_number
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Dynamic memory stored in 'elf32_phdr' allocated
through 'calloc' be lost.
the patch port from apl_sdc_stable branch.
Tracked-On: #2705
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There are several duplicate definitions for check_dir, it can check or create directory at will. However, only acrnd and dm monitor can create the directory. This commit fixs the possibility of creating directory at will by no permission process, which adds a param flags to conctrl if it should create the directory. By the way, this commit collates related MACRO into the same file , deletes the duplicate definitions in another files and fixs some format issues.
Tracked-On: #2886
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Should not set hci_address to zero during USB reset.
Tracked-On: #2922
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For multiple guest os and particular audio features support domain id
and name is required.
Tracked-On: #2924
reviewed-by: Yu Wang <yu1.wang@intel.com>
reviewed-by: Yakui zhao <yakui.zhao@intel.com>
reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Marcin Pietraszko <marcin.pietraszko@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When LINK type TRB are received among multiple BULK TRBs, the copying
logic in DM will miss one or more TRBs. This patch is used to fix it.
Tracked-On: #2926
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch add one new parameter --rtvm to indicate if the guest is a RTVM or not.
For RTVM, it may be not interference by SOS.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- Remove QemuFwCfg/QemuFwCfgS3Lib
- Use ACRN E820 map to query system memory size
- Support 64-bit PCI host aperture via ACRN E820
- Remove debug code in release build
- Take out unnecessary OVMF drivers
- Revert "Enable MP support"
- Use CPUID 0x40000010 to determine tsc frequency
Tracked-On: #2868
Signed-off-by: Peter Fang <peter.fang@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The patch adds mount namespace for the container. Without the patch
when we destroy the container, there still have mountinfo for the
container. This is one workaroud for runC bug. If the mount namespace
is disabled, when try to mount host "/" to container "/", there will
cause the issue. Detail discussion as following link.
"https://groups.google.com/a/opencontainers.org/forum/#!searchin/
dev/mount$20namespace%7Csort:date/dev/p10bq-kXODk/obkqBRdxCQAJ"
After enable mount namespace, some small performance imapcts for
specific mediator, likes USB. Will keep monitor runc community,
and revert this patch once related runc patches get integrated.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch adds "-C" parameter in sample launch_uos.sh file to enable
launch Device-Model in runC container. The argments will be linked to
SOS /usr/share/acrn/add/vm1.args, and acrnd will use the it as default
start argument.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Length of vmname is restricted to MAX_VM_OS_NAME_LEN. Keep it
coincide with VM name array size in vm_config.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
smbios table is not required so remove it.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OVMF requires a more descriptive mechanism than RTC CMOS to retrieve
ACRN's memory layout, so we now pass the E820 map to it, starting at
0xEF000 (ROM area).
ACRN currently uses [4GB, 5GB) as its 64-bit PCI host aperture. This is
inconsistent with OVMF's assumption of its platform's memory layout,
because it derives the size of high memory from RTC CMOS, which is
incapable of describing the 64-bit PCI hole.
By default, OVMF uses RTC CMOS 0x5b/0x5c/0x5d to determine the size of
high memory. This value only tells OVMF how much memory is above 4GB,
but not the platform's memory layout above 4GB.
Using RTC CMOS works for QEMU, because QEMU places its 64-bit PCI host
aperture above its highmem. Therefore, OVMF can always assume highmem is
located at [4GB, 4GB + highmem), which is not where ACRN's highmem is
located. For example, if we have 1GB of usable memory above 4GB, ACRN
will place it at [5GB, 6GB).
This change allows OVMF to correctly identify the guest's memory layout.
It will consider any reserved region above 4GB as 64-bit PCI host
aperture.
MP table, SMBIOS and ACPI tables are all located above 0xF0000 so it is
guaranteed that there is no overlap. There can only be a maximum of 128
E820 entries.
v1 -> v2:
- provide more explanation to this commit
- add signature before E820 map for OVMF backward compatibility
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
While building the E820 map for UOS, [lowmem, lowmem_limit) and [5GB,
highmem) can be empty. Remove the empty entries if they appear.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- fix comments
- update the first RAM region to [0, 0xA0000) because [0xA0000, 1MB) is
designated as video memory and ROM area
- use 2GB as lowmem_limit
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add the PCI MMIO fallback handler to the 64-bit PCI host aperture, so
that the guest won't inadvertently crash acrn-dm due to unhandled MMIO.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- use strncmp() instead of comparing string pointers to make no
assumptions about the toolchain's literal pool
- re-shuffle the functions so they're consistent with mem.h
- make non-public functions static
- increase code re-use
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Per commit dbd9ab07e1, GUEST_CFG_OFFSET is
no longer needed.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch marks thre_int_pending as true when THR is empty.
Tracked-On: #2713
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It makes more sense by aligning directory name with board name.
Tracked-On: #2760
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
This patch add one sample script to launch zephyr as guest.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
check the power button acpi driver firstly, then find input event
corresponding to the power button.
Tracked-On: #2695
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Followed ACPI spec 4.8.2.5, if SCI_EN is set, the interrupt will be
routed to SCI interrupt logic. If SCI_EN is not set, the interrupt
will be routed to SMI interrupt logic.
ACRN does not support SMI for now, so check SCI_EN before trigger
SCI.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
when UOS is running, "acrnctl suspend vm" and "acrnctl stop vm" commands are
able to trigger a SCI interrupt, then UOS enters sleep or shutdown according
to the default behavior of the power button. The default behavior is based on
UOS power button setting.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the >32MB limitation for 64bits mmio hole allocation, ACRN
hasn't met such buggy devices for this limitation. Besides, OVMF
has one bug which requires 64bits BAR must allocate from 4G+ address,
otherwise trigger assert. This patch can workaround it.
Tracked-On: #2577
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Limit 64 bits PCI BAR space from 0x100000000UL ~ 0x140000000UL,
as HV now only support 0x400000000UL+0x80000000 as top of guest memory
address. EPT table size is static allocated.
Tracked-On: #2577
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default on
some distributions (e.g. Gentoo).
This could result in the error like this:
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
<built-in>: note: this is the location of the previous definition
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The patch changes runC container's default rootfs directory. In the patch
change the rootfs to runC bundle's parent directory. Because in ACRN we map
SOS rootfs to container so the rootfs is an empty directory, after move it to
parent directory all the container can share the same rootfs.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds more Linux capabilities for runC container. In ACRN runC
we will map native root directory to the container, when we launch UOS from
container it need more Linux capabilities to operate dev node. So add the
capabilities in runC configuration file.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Change the default runC container start application to sh which will be
modified by launch_uos.sh during UOS boot. And the replacement is the
parameter set by "acrnctl add" command.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
This patch implements acrn-dm QoS. When the script be launched with "-C"
parameter, the acrn-dm will be executed in container for isolating the
resouce of service OS.
The QoS parameter is described in
/usr/share/acrn/samples/apl-mrb/runC.json, users can modify it following
their performance requirements.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Listen to power button state via /dev/input/event0. When the power
button is pressed, then set PWRBTN_STS bit. If PWRBTN_EN is set, the
sci interrupt is triggered.
For suspend or shutdown of UOS by power button, needs UOS to configure
the default behavior of the power button.
Tracked-On: #2560
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
patch is from Alex Du for IASL tool updated to support
ACPI 6.3 version.
Tracked-On: #2568
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Socket is not currently supported as backend for virtio-console.
Kata containers require socket backend for virtio-console in order to
communicate between the agent running in the VM and the proxy running
in the host. In order to support Kata with ACRN, this feature is required.
v1-->v2:
Prevent new accepts on an already established socket connection. This
removes the need for accepted_fd and accept_evp varibles introduced in
previous patch.
v2-->v3:
Fixed coding style and removed debug prints.
Tracked-On: #2448
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For UP2 releases, we don't need enable_initial_modeset, just as the NUC
platforms, so remove this parameter from the boot args.
Tracked-On: #2516
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Need to properly remove and free its MMIO entry during deinit.
Tracked-On: #2453
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The dummy channels can emulate cbc lifecycle, cbc signal and cbc raw
channel instead canbox, and the feature can be enabled by ioc command
line within wakeup reason bit 24.
Tracked-On: #2481
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This example script launch a VM with lapic passthrough for realtime scenarios.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
New option "--lapic_pt" added to create VM with local apic passthrough, for
realtime scenarios.
When the option is set, a VM is created with LAPIC_PASSTHROUGH.
The option is not set by default.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- don't generate io apic entry for vm with lapic pt.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Using 'make' directly means that the jobserver environment variables don't get
passed down, so sub-builds for example don't use -j.
This is documented as the wrong thing to do:
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable
Use $(MAKE) instead, and compile times drastically improve:
acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s
Tracked-On: #2370
Signed-off-by: Ross Burton <ross.burton@intel.com>
For virtio-blk, when the backend is a regular file, the discard
and
is implemented by fallocate(), but this function will not wait for
the discard command handled by disk.
So, add fdatasync to make sure the DISCARD is executed
synchronously.
Tracked-On: #2395
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Allow specifying the initial expiration in absolute time.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It was designed to be used in non-blocking mode to prevent the mevent
thread from blocking itself indefinitely, but it was created in
blocking mode.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, we support SBL on two different boards.
So build and install them all in E2E build.
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For the upstream purpose the device file of /dev/acrn_vhm is renamed
to /dev/acrn_hsm. Correspondingly the path of offline CPU is also changed.
So the device file of /dev/acrn_hsm is checked to configure the path
of ooffline VCPU.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Currently VHM driver is opened by using the device file of /dev/acrn_vhm.
But for the upstream purpose it is renamed to /dev/acrn_hsm.
So we need to check that the device file is acrn_vhm or acrn_hsm and then
open the VHM driver.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Adding this parameter so that it could provide more info when
kernel panic happens. And this has almost no overhead as it only
uses several existing kernel APIs.
The 0x1f is a bitmask for type of info to be dumped, and it means
it will print task/memory/timer/lock/ftrace info when panic happens.
Tracked-On: #2330
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2301
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2283
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There's a DP port on UP2 board, so we cannot add video=DP-x:d paramter,
otherwise, DP monitors will not be able to be detected on UP2 boards.
Tracked-On: #2268
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently whether audio works in virtio mediator or pass-through mode can be determined
by checking the device file of vbs_k_audio
But before the completion of loading audio virtio-BE module, the device file of /dev/vbs_k_audio
doesn't exist. In such case in course of loading UOS, the incorrect work mode is selected
for audio device (passthru instead of mediator). This is incorrect
Tracked-On: projectacrn/acrn-hypervisor#2247
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
UP2 don't have ioc, there is no need to simulate it.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Clear Linux complains about not being able to write the bit to PM1A:
ACPI Error: Could not enable RealTimeClock event (20180531/evxfevnt-184)
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Clear Linux complains about not finding RTC as a PNP device:
platform rtc_cmos: registered platform RTC device (no PNP device found)
This is a port of Bhyve vRTC's user-space logic.
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #888
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To avoid the race issue for mevent in uart, we introduce the
teardown callback to handle resource free case.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Make uart_init and uart_deinit internal functions. And make
uart_set_backend/uart_release_backend cover uart_init/uart_deinit
function.
This will make mevent teardown callback adding easier for uart_core.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We will mark ioreq as COMPLETE in VHM via IC_NOTIFY_REQUEST_FINISH
ioctl. vm_notify_request_done can do it. So remove this one.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VHM will provide a ioctl to clear all IO requests' status. This is
useful to handle ioreqs in VM normal reboot and emergency reboot.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Also remove the '\n' from the hugetlb's file name.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Discard the input/output data when open tty file. To avoid the
mevent callback is triggered immediately when the fd is added to
epoll.
Also update the uart_drain only read the data from tty file when
fifo has available space.
Tracked-On: #2159
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As VIRTIO_CONFIG_S_NEEDS_RESET is not defined in standard virtio header
file on ubuntu, there will be compile issue. so add
VIRTIO_CONFIG_S_NEEDS_RESET to fix it.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
S3 emulation is complicated and greatly dependent on system timing,
hence this patch changes log level for some important logs to help
online debugging (could output log by modifing launch_uos.sh and
without re-compiling)
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Support DISCARD command is meaningful when eMMC usage is high or
there are lots of remove operations. For example, when Guest
Android is running, there will be lots of files being created and
removed. However, virtio-blk BE does not support DISCARD command,
data remove operation in UOS will not trigger erase in eMMC. After
period of time, the eMMC will be consumed out, and erase must be
done by eMMC firmware before writing any new data. This causes the
eMMC performance decrease in the whole system (SOS and UOS).
To solve the problem, DISCARD should be supported in virtio-blk BE.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistent with kernal code, change delete to discard.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace strlen function with strnlen function in device-model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace function sprintf with snprintf in device model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is an obvious bug, which releases memory but still access the
data on the released memory. It is risky operation, and may result
failing to do normal enumlation process. This patch is used to fix
it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB S3 virtualization logic is complicated and heavily affected by system
timing. To make the debugging work easily, change related log level to facilitate
quick bug fixing.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
irqfd only supports msix devices. In the current code a mevent is
added to poll the callfd from userspace to support intx devices.
This patch removes the support for non-msix devices since they are
not used in the current device model.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-net resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called. A ref_count
is added to virtio_console data structure. Teardown callback needs to
free the resources of the backend and when the ref_count of the
virtio_console is zero the whole virtio-console is freed.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-input resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
On Intel Apllo Lake platform, the VBus will drop after the SOC suspended,
hence during the SOS resuming process, there will be a disconnecting event
and a connecting event sent to each native USB device in order.
This patch will use new strategy for S3 resuming emultion.
1. The DM set PORTSC register to 'no device attached' state when S3
suspending started,
2. SOS resuming starts and do nothing for device disconnecting event,
3. 'Cache' device connecting event and don't report it to UOS,
4. UOS believe no device attached due to PORTSC register state and
begin to clear the resource allocated for the device before S3
suspending,
5. DM receives the Disable Slot command from UOS and report the 'cached'
device connecting event to UOS, hence trigger the emulation behavior
for the device.
The purpose of this strategy is to let UOS resuming proceed as quickly as
possible, which means the UI will be turned on quickly to user.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI spec 5.4.1.1, this command hasn't ask to clear
PORTSC for R/S handling. So the PORTSC should always present the
physical usb bus status.
The old implementation changes the PORTSC according whether the
pci_xhci_dev_emu struct is allocated, it is not consistent with
spec and this patch is used to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Comparing two USB devices' path is frequently used operation, abstract
it as an seperated function for convenience.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This workaround will delay the UOS resuming for 5 seconds, this
behavior is not right and should be replaced by dynamic style.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are several KW issues which uninitialized variables
are used. This patch will fix those KW issues.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
In USB mediator, sscanf, strtok and atoi API is banned, so replace them
with permitted API function.
Tracked-On: #1254
Signed-off-by: Yang Liang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Always enforce data size when using BAR access functions.
Currently, the size serves as a hint to the BAR access functions and
these functions are expected to behave accordingly. Some of the access
functions, e.g. virtio ones, don't always truncate the data but expect
the caller to take care of the data size. This causes problems with
OVMF's virtio drivers during I/O instruction emulation because RAX can
contain junk bits that shouldn't be written to the device.
v1 -> v2:
- improve readability
Tracked-On: #1935
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use '--ovmf <OVMF image location>' when launching acrn-dm.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Generic infrastructure for loading BIOS/ROM and providing EPT pages at
High BIOS region.
The size of High BIOS is rounded up to a multiple of 2MB.
v2 -> v3:
- refine mmap_hugetlbfs* to reduce code replication
v1 -> v2:
- make this code generic instead of OVMF-specific
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This is preparation for the upcoming High BIOS work.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
A sample args file is added, which will be linked to /usr/share/acrn/conf/add/[vmname].args at integration time.
Because it is needed for AaaG one-key startup enabled build.
Tracked-On: #2040
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The current vmcfg uses the default values in Kconfig when a previous .config
does not exist. This leads to additional complexity to silentoldconfig.py which
has different logic depending on the environment variable 'BOARD'. This also
blocks the effort to make the top-level Makefile recognize BOARD because any
environment variable set in the top-level Makefile cascades to the other
Makefiles, leading the work around above to fail.
This patch introduces a generic defconfig for vmcfg and simplifies
silentoldconfig.py to always fail when neither .config nor the specified
defconfig exists.
Tracked-On: #1995
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
EV_MSC is configured as INPUT_PASS_TO_ALL in input driver. There is
a loop in the use case of virtio-input. They should not be forwarded
back to BE since they have already been sent to native driver before
sending to FE.
Tracked-On: #2006
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To fix the issue that watchdog reset hang issue. At previous change,
we assume the reset comes from guest. But watchdog reset or dm killed
by signal is different. It's possible the vm_loop stick on ioreq
attaching.
The new fixing has two parts:
- fixing from kernel side to remove the race issue in ioreq attach,
req_complete_notify and client destory.
- Move the client destroy before waiting of vm_loop exit.
Tracked-On: #1986
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the runC container config file, we will run acrn-dm
in runC container, and set acrn QoS parameters based on runC.
In the config file we mount SOS root directory to the container and
disable network/mount/ipc namespace.
Tracked-On: projectacrn/acrn-hypervisor#2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After mutiple usb devices send enable slot commnad and get slot id each
other, address device setup flow is not sorted by slot id. According to
current design, it will casue assert failure. This patch takes off this
restriction.
Tracked-On: #2017
Signed-off-by: Yang Liang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pass teardown callback when add mevent in mei mediator code.
Which could avoid run_callback calling after the related data
structure is freed.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is one race issue between mevent callback (which is called
in mevent_dispatch thread) and mevent_delete (which could be called
in dev thread). And the callback is called after mevent_delete.
libevent have the exactly same issue. The issue is decripted here:
https://github.com/libevent/libevent/blob/master/whatsnew-2.1.txt
The fixing is:
We introduce a teardown callback to mevent and make sure there is
no race issue between callback and teardown call.
This patch updates the mevent API and the caller as well.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Peter, Thomas and Shuo raised one race issue in mevent_del. It
happens like following:
Thread mevent_dispatch Thread
mevent_delete_event
epoll_ctl_del
free(evp)
mevent_handle with freed evp
The fixing is adding sync between mevent_delete_event and
mevent_handle in mevent_dispatch.
Thread mevent_dispatch Thread
mevent_delete_event
add evp to del_list
notify mevent_dispatch
return
mevent_handle
Remove evp from del_list
Remove evp from epoll_fd
closefd()
free(evp)
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
this patch is for updating path of the UOS image in launch_uos.sh script to adapt latest getting started guide,
Tracked-On: #2003
Signed-off-by: Ailun258 <ailin.yang@intel.com>
The tpm patch delete the "break" for CMD_OPT_DEBUGEXIT branch.
Tracked-On: #1978
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the USB kernel drives and devices of SOS are not available and
functional ready after UOS is resumed from frozen state, the comming
USB command from UOS will cause a disaster because the DM has no
resourse to to emulation.
This patch add a dynamic time span (could change according to number
of native USB devices attached) to give USB drivers and devices of
SOS an opportunity to be ready.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The thread function usb_dev_sys_thread is the source of libusb events,
which is also the basis of USB/xHCI emulation. During S3 process,
function libusb_handle_events_timeout may fail and return -1, which
could result of exit of the thread (BTW, this failure is resulted from
USB native reseting behavior during S3). Under this situation, the emulation
of USB/xHCI could never continue.
This patch fix this issue by continuing to call libusb_handle_events_timeout
even it reture -1. The return value will be finally ok after S3 process is
completed.
This patch will continue poll after failure and hence fix this issue.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
During S3 process, the dev in the function pci_xhci_device_doorbell
may be set to NULL when disconnection is detected by DM. This patch
is used to remove this risk.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The 'slot_allocated[]' field of pci_xhci_vdev is used as flag of
slot allocation. In current design, this variable is not set to
false in disconnection callback 'pci_xhci_native_usb_dev_disconn_cb'.
This patch is used to fix it.
Tracked-On: #1894
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the old implementation, function vm_get_suspend_mode is used
as the interface to check whether the UOS is in the S3, That is
not saft way.
This patch use Port Link State (PLS) to substitute the old logic.
According to xHCI spec 5.4.8, the PLS should be U3 during the
UOS is in the S3 state.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI 5.4.8, the Port Link State Change (PLC) bit
should not be set to 1 during suspend process. This patch is used
to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Under current implementation, when USB control transfer failed
with Endpoint Stall error, there is no response reporting to UOS.
This logic will result of timeout in UOS kernel and hence a longer
enumeration process.
This patch reports the Stall Error to UOS by xHCI Completion Event,
which will fix this issue.
Tracked-On: #1895
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
now hypervisor will support to hide ignored PCI device from SOS,
it need not modify SOS PCI driver to support this feature.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Based on existence of /dev/vbs_k_audio file
launch AaaG with proper audio virtualization mode
Signed-off-by: Pawel Furtak <pawel.furtak@intel.com>
Tracked-On: #1915
Reviewed-by: Yu Wang <yu1.wang@intel.com>
`@return` is dedicated for brief description of return values, not for comments
stating actual return values. In addition, sphinx + breathe does not join
multiple adjacent `@return`. This results in multiple `Return` sections in the
generated document, which is confusing.
This patch replaces `@return` with `@retval` for the lists of return
values. Adjacent `@retval` can be joined into one list by breathe.
v1 -> v2:
* Replace return value descriptions like `negative` and `positive` with
expressions like `<0` and `>0` in `@retval`.
* Keep the list of `@retval` comprehensive, even when there is a `@return` to
generally describe what the return value means.
* Drop duplicated `@return` when it does not give more information than the
`@retval` list.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
v4 -> v5
Replace strcpy with strncpy
Refine resource free if error happens
Remove meaningless *in_progress* label for pthread wait/signal
Rename the coreu thread routine name (virtio_coreu_thread)
v3 -> v4
Move setsocketopt to connect_to_daemon
Cleanup coreu file descriptor after close
Reconnect CoreU daemon if the socket descriptor is invalid
v2 -> v3
Move the daemon connection to vdev_init
Diagram the CoreU virtualization architecture
Create a seperate thread for sending and receving the CoreU message
Change the socket name
v1 -> v2
No change
v1
Initial CoreU back-end driver
Signed-off-by: Yu Shiqiang <shiqiang.yu@intel.com>
Update the 'launch_uos.sh' script for UEFI platforms to point at the latest
iot-lts2018 kernel installed by means of the
/usr/lib/kernel/default-default-iot-lts2018 symlink which is set-up by the
kernel-iot-lts2018 bundle.
Update the Getting Started Guide to reflect this minor change.
Tracked-On: #1927
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Full virtualized TPM CRB device.
The TPM CRB module will handle TPM2 MMIO access. It will forward
the command/data to TPM emulator for command processing if there
is a valid TPM command.
Tracked-On: #1924
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch will create control channel and command channel
so as to communicate with swtpm. Based on the 2 channels,
a set of APIs will be implemented and exposed.
Tracked-On: #1924
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The signal is used to get camera right and left values.
Tracked-On: #1886
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Simple atomic add/dec do no guarantee reference count full
synchronization without a lock. Compare and swap operations
are required for correct implementation.
Tracked-On: #1875
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
When thread_cancel() is called to exit pthread, we can't know
when the thread exit done unless pthread_join() is used to
wait for thread exit.
Tracked-On: #1868
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix the prefix comparison, we need to compare on prefix length, not
on devpath len, otherwise we always fail.
Tracked-On: #1848
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Reset directory name to receive clean prints.
Tracked-On: #1847
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Edge triggered mevent on sysfs file is triggered
immediately after mevent_add(), hence this has to be ignored.
The issue that is resolved that the 'first' flag was
global and wasn't reset on each mevent_add().
Tracked-On: #1846
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Prevent intercepting reset callback if reset state
transition is already in progress.
Tracked-On: #1846
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Clean up of a couple of README.rst files located respectively under hypervisor/
and devicemodel/ to remove obsolete and unmaintained information. Both hold a
basic introduction about the folder content and refer to the official
documentation website for more detailed information.
Tracked-On: #1827
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
vcpu thread need to exit when doing VM full reset and VM shutdown.
Change the code to align the logic. This also can fix race condition
between ioreq client destruction and accessing.
Tracked-On: #1857
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Tracked-On: #1825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the User (guest) OS launch script with the Clear Linux
version used with ACRN v0.3 as well as the corresponding kernel
version.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The /dev/vbs_ipu is used by the backend driver of IPU mediator on SOS kernel
If the file of /dev/vbs_ipu exists, it indicates that IPU works in mediator mode.
Other it will fall back to the pass-through mode.
But the commit 969f7cf071 doesn't check the file of /dev/vbs_ipu correctly.
It should be -e instead of -f.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Wu, BinBin <binbin.wu@intel.com>
At devicemodel/hw/uart_core.c, struct ttyfd has only one file
descriptor for uart backend device, that is OK if DM uart open
a tty characteor device under /dev/ for reading, writing and
terminal operating.
When use stdio as backend tty device, there are 2 fds, stdin/stdout.
DM should read from 'stdin' and output to 'stdout'. But ttyfd just
has one fd, and is only for 'stdin', so dm has to output to stdin,
too, not to stdout.
That cause a problem: if use stdio for uart backend, you can't
redirect UOS console to any other files. Because stdout is not used.
We hope to store information from VM console to system journal,
when UOS is launched by Acrnd automatically. The systemd need to
redirect stdout of dm to system journal files, but it can't be done.
So we can split the 'fd' of struct ttyfd to 'fd_in' & 'fd_out'.
they are same when use tty device; And they are different when use
stdio, 'fd_in' is for stdin and 'fd_out' is for stdout.
Tracked-On: #1759
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
To support expose "interrupt storm monitor" params setting to user;
it is easy to adjust the params in launch UOS script.
Tracked-On: #1724
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
modify and add interface to set interrupt monitor params;
it can be set by acrn-dm input arguments like following:
--intr_monitor 10000,10,1,100
the 4 params order is:
interrupt storm theshold per second,
probe period to get interrupt data,
pass-through devices' interrupt injection delay time,
delay duration, after it, stop injection & restore to normal
Tracked-On: #1724
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Difficult to review the changes of sos_bootargs when the args is a single line.
Split sos boot args into multiple lines.
Tracked-On: #1730
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator should keep sending acnrd boot reason until received
UOS heartbeat init message, then turn to send SOS wakeup reason
through read native cbc lifecycle cdev.
Tracked-On: #1727
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
remove these options from legacy release:
i915.tsd_init=7 i915.tsd_delay=2000
i915.enable_preemption=1 i915.context_priority_mode=2
Tracked-On: #1697
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The /dev/vbs_ipu is used as the backend driver of IPU mediator on SOS kernel.
If the file of /dev/vbs_ipu exists, it indicates that IPU works in mediator mode.
Other it will fall back to the pass-through mode.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
paddr_guest2host has same function with dm_gpa2hva. And There is no
usage of dm_gpa2hva. Remove it.
Tracked-On: #1595
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
(EV_MSC, MSC_TIMESTAMP) is added to each frame just before the
SYN event since kernel 4.15. EV_MSC is configured as
INPUT_PASS_TO_ALL. In the use case of virtio-input, there is
a loop as follows:
- A mt frame with (EV_MSC, MSC_TIMESTAMP) is passed to FE.
- FE will call virtinput_status to pass (EV_MSC, MSC_TIMESTAMP)
back to BE.
- BE writes this event to evdev. Because (EV_MSC, MSC_TIMESTAMP)
is configured as INPUT_PASS_TO_ALL, it will be written into
the event buffer of evdev then be read out by BE without
SYN followed.
- Each mt frame will introduce one (EV_MSC, MSC_TIMESTAMP).
Later the frame becomes larger and larger...
This patch fixed above issue by ignoring MSC_TIMESTAMP from guest.
Besides that timestamp is added for every status event from guest
before writing to evdev.
Tracked-On: #1670
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
change it to match with release version.
Tracked-On: #1690
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For CS of UOS, we would like to pass all related info (cs attribute,
limit, base) from DM.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
For GP-MRB ACRN using ttyS0 as console,
since this is release bootargs file so ttyS0
will be skipped in booting but needed kernel
console ttyS2 in bootargs to get the Kernel console.
Tracked-On: #1655
Signed-off-by: santoshkumar <santoshkumar.laxminarayan.rai@intel.com>
The FW reset is currently detected from two points upon
a read failure from native read and from the reset
handler.
The fix removes the detection from the mevent rx callback,
leaving a single detection point.
To prevent reset hiccup, hw_ready is not set if a full rescan is
performed, it will be set only when virtio FW will request the FW reset.
Tracked-On: #1632
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
vmei_host_client_to_vmei() may return NULL we need to check
for the return value.
Tracked-On: #1630
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Simplify the flow by adding mutex_type variable
and call pthread_mutexattr_destroy() on the error path.
Tracked-On: #1630
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
MEI HBM the disconnect replay doesn't have the address set,
breaking the protocol, fix the issue.
Tracked-On: #1570
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Accoring to xHCI spec, there are some TRBs with zero data length
which used to pass command to xHCI. In the DM, those TRBs should
not be sent to native device through libusb. The logic in the
current implentation fails to process some corner cases, this
patch is used to fix it.
Tracked-On: #1639
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
on 8GB MRB: cat /proc/meminfo|head -n 1|awk '{print $2}'
it is: 7993388, it is not 8000000, so set it compare
with 7500000, then it can allocate 6GB to UOS.
Tracked-On: #1657
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
- Put version.h, vmcfg_config.h, .config into DM_OBJDIR like what's
already done in hypervisor and tools, it does not have to stay in
source or else a extra entry in .gitignore is needed.
- Change some implicit targets to explicit targets, include:
vmcfg_header -> $(DM_OBJDIR)/include/vmcfg_config.h
$(PROGRAM) -> $(DM_OBJDIR)/$(PROGRAM)
then $(DM_OBJDIR)/include/vmcfg_config.h would be depended by
$(DM_OBJDIR)/%.o without the need involving in a extra implicit
target vmcfg_header. (And it's not set in .PHONY)
- These header targets vmcfg_config.h and version.h should be depended
by $(DM_OBJDIR)/%.o target instead of by all target, and this is done
since they are in HEADERS now.
- Drop redundant clean commands and fix some bad styled coding, like
multiple blanks in a line.
Tracked-On: #1599
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Change kernel boot cmdline to load GuC firmware for SOS.
We want to enable GuC and HuC in Service OS and this is
an effort to enable use cases across all boards.
Tracked-on: #1638
Proposed-by: Charles, Daniel <daniel.charles@intel.com>
Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Change kernel boot cmdline to load GuC firmware for SOS.
We want to enable GuC and HuC in Service OS and this is
an effort to enable use cases across all boards.
Tracked-On: #1638
Proposed-by: Charles, Daniel <daniel.charles@intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
The virtual rpmb key transfer path is ready now, so replace
previous temporary fixed key solution with random key
solution.
Tracked-On: #1636
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Virtio-console device specific configuration is readonly, callback
for the cfgwrite is not required. This patch removed the unused
virtio_console_cfgwrite.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Will attempt to access element 2048..2049 of
array "ptr32" if below conditions are both true:
1) ptr32[i] == MULTIBOOT_HEAD_MAGIC
2) (i == (ELF_BUF_LEN/4) - 1)
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Fengwei Yin <fengwei.yin@intel.com>
Remove the changing operation for 'xdev->native_ports[].state' in
pci_xhci_cmd_disable_slot. The operation should not be done in this
funciton.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
On certain SOC, during the system suspend and resume process, connecting
and disconnecting events may happen. In previous implementation, DM didn't
clear PED bit in the xHCI PORTSC register, this will induce many invalid
polling operations in UOS and fail to enumerate one or more USB devices.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the LINK type TRB are received, it should not be counted as
valid date block to give libusb. This patch is used to fix it.
Tracked-On: #1567
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function for port unassigning: pci_xhci_clr_native_port_assigned
should reset the 'info' member to all zero when it is called.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This issue is result from reporting interrupt when the interrupt ability
of virtual xHCI is disabled.
As Event Ring State Machine showed in Figure 20 of xHCI spec, following
rules should be followed:
1 when RS bit of USBCMD register is zero, Event Ring should not be accessed;
2 when INTE bit of USBCMD register is zero, Interrupt should not be sent.
Tracked-On: #1566
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The () was missed during the patch refine. This patch add it.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When usb device numbers reach up to XHCI_MAX_SLOTS. The slot_allocated
array will get out of range. This patch is used to fix this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After excap pointer is assigned, it should be checked whether it's
possible to get assignment for NULL pointer or not. This patch
fixes this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
That string was changed by accident and introduced the removed
items.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Enable pstore via the sos kernel cmdline, as ABL doesn't
reserve memory and pass parameters for pstore.
Tracked-On: #1024
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
New feature:
Update vFastboot to v1.0
Boot time optimization
Support Crash mode, which uses vFastboot in vSBL as Crash mode target.
Support Ramooops.
Tracked-On: #968, #1578, #1579, #1580
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
if acrnd or acrn_guest service enabled, launch_uos.sh will be called
early time during system boot up, while a pci driver module may be
insmod and disable cpu hotplug in short time, which could make
cpu offline fail, we need check it to make sure cpu offline real happen
before hypercall to disable vcpu.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1584
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
compare the two unsigned numbers to avoid delta calculation overflow.
It could happen during UOS warm root, which can trigger a "fake"
interrupt storm.
Tracked-On: #1476
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
sscanf and strcpy are banned according to the security requirements.
So replace them with their safe alternative.
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
These APIs are wrap of standard strto* APIs. The first parameters in
these APIs should be declared as "const" since they have never been
changed so that they can also be used when passing a variable declared
as const char *
Fixes: e1dab512c2 ("dm: add string convert API")
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Detect if SOS kernel mei drivers supports virtualization,
via driver hbm version 2.2
If yes use virtio_mei mediator for the mei device
otherwise fallback to passthrou mode.
Note that HBM version is not sufficient identification
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In vmei_start() the HBM host client is created,
it handles HBM protocol.
The HBM client is a management object and
is not exposed by the mei native driver.
The communication between TX and RX threads
is handed via internal pipe(2).
Second, we connect all fixed address clients as the mei
protocol doesn't provide connection mechanism for them,
they appear always connected.
Last, the hw_ready is set.
Define virtio_mei_ops, ass all the handlers are now available.
Tracked-On: #1536
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rx is triggered from epoll event (mevent), a host client
is retrieved from associated event data. P proper mei message header is
attached to the packet and sent to the virtio FE device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
TX from virtio driver is handled firt via
virio tx notify handler vmei_notify_tx(),
placed into host clinet tx circular buffer.
TX thread will then write the data to the device.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement the FW part of the HBM protocol.
Currently the support version is 2.0.
The HBM protocol handles client management, such
initialization handshake, connection, power management,
and the flow control.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ME client enumeration is received from sysfs attributes
of the native device.
V3: Use bounded functions.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei mediator perform reset handshake via
the cfgread/write handlers and provide access
to fw status registers.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There are multiple types of resets that need to be handled
by the mei device.
The reset may be initiated from both sides host or fw.
The host requests reset on probe and remove,
power state transaction, and errors,
while ME FW may request reset upon error.
If the native device undergo reset the host application
has to be notified.
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add standard container_of macro to access
the parent struct pointer.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
HBM is a control channel protocol between mei device
driver and mei fw.
Add new ioctl IOCTL_MEI_CONNECT_CLIENT_VTAG
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove virtio_heci to be replaced with virtio_mei
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
devicemodel/vmcfg/example.h is a example, it is generated at build
time.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
run 'acrn-dm --dump <index>' to show build-in parameters
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Enable --vmcfg options for acrn-dm, if --vmcfg <index> is specified,
build-in VM configuration will be used, and override any other
optional parameters.
run 'acrn-dm --vmcfg list' to show all build-in VM configurations.
run 'acrnpdm --vmcfg <index>' to launch UOS with selected config.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Script that setup envriment on MRB platform, for UOS with build-in
configuration
For example, you need to run mrb-env-setup.sh once, to
prepare images, networks and pci-stubs, etc,.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Add build-in vm1 configuration for MRB platform, this is also an
example about how to add new VM configurations
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
use *args_buildin[] to hold build-in VM configurations
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
VMcfg use Kconfig mechanism to generate a header file
devicemodel/include/vmcfg_config.h, which contains many macro symbols
for conditionally compiling. This feature is disabled by default, to
enable it, You can switch to devicemodel/vmcfg/ and run 'make' with
these options:
'make menuconfig'
run 'make menuconfig' at ./devicemodel/vmcfg/, and configure manually.
When you finished, save your changes to ./devicemode/vmcfg/.config
'make oldconfig'
Overwrite ./devicemodel/vmcfg/.config with your config file, then run
'make oldconfig' at ./devicemodel/vmcfg
'make *_defconfig'
E.g, there is ./devicemodel/vmcfg/config/mrb_defconfig, you can run
'make mrb_defconfig' at ./devicemodel/vmcfg/
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
This patch is one workaround to resolve a crash issue for certain brand
touch screen (eGalaxTouch EXC7200-7368v1.01). The formal fix should
follow the xHCI spec to stop xfer and generate transfer completed event
trb prior to Stop Endpoint Command complete event trb. It should be a
big change and for short term, do nothing for the stop endpoint command
which is no other side effect be observed so far.
Tracked-On: #1413
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function pci_xhci_get_native_port_index_by_path didn't
compare the bus number during the process of native USB
device searching. This patch is used to fix it.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to support emulation of multiple layers of hubs
under Flat Mode.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to enable multiple hubs in single layer under
Flat Mode.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support the multiple hubs and multiple layers of hub, the
port_map_tbl should be replaced by native_ports to record all
native devices' state, including assignment state, emulation
state etc.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many places in USB emulation implementation to get
native USB device infomation, and the related codes are long
and repeated many times. This patch introduces function
usb_get_native_devinfo to remove redundent codes for the
purpose mentioned above.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduce struct usb_devpath to indentify uniquely an USB
device, which is basic element for multiple hub support.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previous design use bus and port(root hub port) for the identification
to the native USB device. It cannot work properly under the multi-hub
situation due to external USB hub is introduced.
This patch removes old hub implementation code, and subsequent patches
will be add support for mutiple hubs.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When do USB role switch between host and device mode, we hit hang issue.
It might be caused by accessing suspended xHCI during that. This issue
need to be root caused later in xHCI driver.
This is a workaround solution, which will be reverted when got a fix.
Tracked-On: #1516
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>