for timer list is operated by per-cpu; and no interrupt
service operates it too. So it's unnecessary for spinlock.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
change its input from map_params to page_table_type, and make it as a
public API.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
before just AP can run "rdtscp" intruction, if run it on BSP,
it will cause "illegal instruction"; now align BSP & AP.
also remove duplicated code.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. exception vector and other information
can be extracted from 'VM-Exit Interrupt-Information'
field of VMCS only if bit31 (Valid) is set.
-Intel SDM 24.9.2, Vol3
2. Rename 'exit-interrupt_info' to 'idt_vectoring_info'
in 'struct vcpu_arch', which is consistent with
SDM 24.9.3, Vol3
3. 'IDT-vectoring information' in VMCS is 32bit
-Intel SDM 24.9.3, Vol3
Update the type of 'idt_vectoring_info' in
'struct vcpu_arch'from 'uint32_t' to 'uint64_t'.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If subsequent write is on the same address, maybe the compiler will optimize
the access of MMIO memory and only the last write takes effect.In such case
it is wrong. For example:
mmio_write_long(0x25, addr);
mmio_write_long(0x26, addr);
mmio_write_long(0x27, addr);
After volatile is added, it can avoid the above possible optimization and
assure that each write takes effect.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The mmio_or_long/mmio_and_long/mmio_rmw_long is defined to perform
the read & write operation. But they are not used. So they are removed.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add percpu earlylog sbuf within hypervisor memory space to accommodate log
before sos booting, and copy the earlylog to SOS allocated sbuf at the first
do_logmsg after SOS sets the sbuf during booting.
With the patch, earlylog of hypervisor could be captured with acrnlog
service if SOS booted. And it may help debugging hv issue if SOS failed to
boot, with "logdump" command.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
These APIs are not used, and not as safe as spinlock_irqsave_obtain/
spinlock_irqrestore_release.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we get cpu feature/capability in boot_cpu_data at boot initialization,
then there no need to get this feature/capability using cpuid again.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add "-i" in the DM boot command line for booting IOC mediator.
NOTE: currently only ioc_init will be called in the main entry, ioc_deinit
hasn't be called so far. The DM plans to add one virtual devices list inside
of struct vmctx in the near furture, and virtual devices data structure will
add one common deinit callbacks which will be called during VM exits.
Will support ioc_deinit once that patch merged.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add three PTY devices as dummy native channels. They are used for emulating
native lifecycle channel, native signal channel and native OEM raw channel
for IOC debugging.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is used for IOC mediator debugging. Due to IOC message logs are
too much, need to save into one file instead of output stdout directly.
By default, the debug log is disabled.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the signal whitelist feature.
All the signal messages will be discarded if they are not existed in whitelist.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC CBC signal serivces including single signal,
multi-signal and group signal. All of them are used for CAN devices
communication and IOC on-board peripherals control.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC lifecycle virtualization.
In native environment, lifecycle is uesed for SoC system power control,
likes enter/exit S3/S5. So these related messages can not forward directly
between physical IOC and Guest OS, they need to be mapped to VM pause, exit
and launch.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the IOC signal identities and signal group identities,
that will be used by subsequent signal support patches.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Carrier Board Communication(CBC) protocol is a duplex protocol for IOC data
transfer, including physical layer, link layer, address layer and service layer.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator communicates with native IOC HW through several native channels of
CBC protocol. And IOC mediator communicates with virtual UART through one virtual
channel.
This patch implements channel operations including open/close/read/write.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator main functionality is transfer data between native CBC char
devices and virtual UART, it is implemented as full virtualization, Guest
OS can reuse native CBC driver directly.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add Automotive IOC mediator data structure definitions.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Include more doxygen info, flag undocumented material, update
.known_issues matching for known doxygen/sphinx issues
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
add navigation to (manually) maintained list (in conf.py) of versioned
docs, and update generating and publishing processes to be
version-aware.
Adds a file to redirect root references to /latest folder now (since we
can't update the server redirects). Might break some links to pages
within the site from external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current, mevent cleanup path has issue. There are possible
following calling sequence happen when reboot/poweroff UOS:
1. mevent_dispatch() calls mevent_destroy
2. do_close_post calls some virtual device deinit to delete
mevent.
This patch introduce mevent init/deinit to make sure:
1. mevent init
2. mevent_add is called when init virtual device
3. mevent_del is called when deinit virtual device
4. mevent deinit
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Using ebx will truncate the high 32bit part of 64bit virtual address.
So using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
In the case that the copy sz is 0, it is unnecessary to do copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Minggui Cao