The mmio_or_long/mmio_and_long/mmio_rmw_long is defined to perform
the read & write operation. But they are not used. So they are removed.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- change the input param of check_page_table_present from struct map_params
to page_table_type
- check EPT present bits misconfiguration in check_page_table_present
- change var "table_present" to more suitable name "entry_present"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
check IA32_VMX_EPT_VPID_CAP MSR to see if ept execution only capability
is supported or not
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
cpu_halt actually mean cpu dead in current code, so change it with
more clear name.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
use pcpu_active_bitmap presents which cpu is active
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
eptp should be record as PA.
this patch changed nworld_eptp, sworld_eptp and m2p eptp to PA type,
necessary HPA2HVA/HVA2HPA transition is used for them after the change.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- read/write page table entries should use VA which defined as "void *"
- the address data in page table entries should us PA which defined as
"uint64_t"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently acrn partitions cpus between SOS and UOS, so the default
policy is to allow guest managing CPU px state. However we would
not blindly passthrough perf_ctrl MSR to guest. Instead guest access
is always trapped and validated by acrn hypervisor before forwarding
to pcpu. Doing so leaves room for future power budget control in
hypervisor, e.g. limiting turbo percentage that a cpu can enter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch takes Intel ATOM A3960 as example that hard code all Px info
which is needed for Px control into Acrn HV and load it in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cpu model name would be used to distinguish which hard coded data
need to be loaded to boot_cpu_data;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
- remove unused map_params in get_table_entry
- add error return for both, which is valid under release version,
as at that time, ASSERT in get_table_entry is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add error return for all, which is valid under release version,
as at that time, ASSERT in modify_paging is empty.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add check_continuous_hpa API:
when create secure world,if the physical
address is not continuous, will assert.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch added API destroy_secure_world, which will do:
-- clear trusty memory space
-- restore memory to SOS ept mapping
It will be called when VM is destroyed, furthermore, ept of
Secure world will be destroyed as well.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--add free_paging_struct api, used for free page tables
it will clear memory before free.
--add HPA2HVA translation when free ept memory
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM Vol. 2:
If CPUID.80000008H:EAX[7:0] is supported, the maximum physical address
number supported should come from this field.
This patch gets the maximum physical address number from CPUID leaf
0x80000008 and calculates the physical address mask when the leaf is
available.
Currently ACRN does not support platforms w/o this leaf and will panic
on such platforms.
Also call get_cpu_capabilities() earlier since the physical address mask
is required for initializing paging.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM:
When CPUID executes with EAX set to 80000000H, the processor returns
the highest value the processor recognizes for returning extended
processor information. The value is returned in the EAX register and is
processor specific.
This patch caches this value in the global cpuinfo_x86.cpuid_leaves. This
value will be used to check the availability of any CPUID extended
function.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable Xsave feature and pass-through it to guests
update based on v2:
- enable host xsave before expose it to guests.
- add validation for the value to be set to 'xcr0' before call xsetbv
when handling xsetbv vmexit.
- tested in SOS guest, created two threads to do different
FP calculations,test code runs in user land of sos.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to C99:
The empty list in a function declarator that is not part of a definition of
that function specifies that no information about the number or types of the
parameters is supplied.
This means gcc is happy with the following code, which is undesirable.
void foo(); /* declaration with an empty parameter list */
void bar() {
foo(); /* OK */
foo(1); /* OK */
foo(1, 2); /* OK */
}
This patch fixes declarations of functions with empty parameter lists by adding
an unnamed parameter of type void, which is the standard way to specify that a
function has no parameters. The following coccinelle script is used.
@@
type T;
identifier f;
@@
-T f();
+T f(void);
New compilation errors are fixed accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Save the pointer of efi_ctx in mi_drivers_addr field of
multiboot structure and pass to hypervisor, not by
saving in register RDX(the third default parameter in
64bit call function).
With this method, we can be compatible with the original
32bit boot parameters passing method and no need to
large the array size of boot_regs in hypervisor.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
For trusty bring-up, key_info is needed.
Currently, bootloader did not transfer key_info to hypervisor.
So in this patch, use dummy key_info temporarily.
Derive vSeed from dSeed before trusty startup, the vSeed will
bind with UUID of each VM.
Remove key_info from sworld_control structure.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
UOS_Loader will trigger boot of Trusty-OS by HC_INITIALIZE_TRUSTY.
UOS_Loader will load trusty image and alloc runtime memory for
trusty. UOS_Loader will transfer these information include
trusty runtime memory base address, entry address and memory
size to hypervisor by trusty_boot_param structure.
In hypervisor, once HC_INITIALIZE_TRUSTY received, it will create
EPT for Secure World, save Normal World vCPU context, init
Secure World vCPU context and switch World state to Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For ARM, The SMC instruction is used to generate a synchronous
exception that is handled by Secure Monitor code running in EL3.
In the ARM architecture, synchronous control is transferred between
the normal Non-secure state and the Secure state through Secure
Monitor Call exceptions. SMC exceptions are generated by the SMC
instruction, and handled by the Secure Monitor.The operation of
the Secure Monitor is determined by the parameters that are passed
in through registers.
For ACRN, Hypervisor will simulate SMC by hypercall to switch vCPU
State between Normal World and Secure World.
There are 4 registers(RDI, RSI, RDX, RBX) reserved for paramters
passing between Normal World and Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_list from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
microcode update from UOS is disabled.
microcode version checking is available for both SOS and UOS.
There are two TODOs of this patch:
1. This patch only update the uCode on pCPUs SOS owned. For the
pCPUs not owned by SOS, the uCode is not updated. To handle
this gap, we will have SOS own all pCPUs at boot time. So
all pCPUs could have uCode updated. This will be handled
in the patch to enable SOS own all pCPUs at boot time.
2. gva2gpa now doesn't check possible page table walk failure.
Will add the failure check in gva2gpa in different patch.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu (anthony.xu@intel.com)
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Add a global boot_cpu_data to cache common cpu capbility/feature
for detect cpu capbility/feature.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch is to detect and enable only APICv features which
are actually supported by the processor, instead fo tuning on
all features by default.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
this patch save native lapic configuration and restore it to vm0's vlapic
before its running, then doing hpet timer interrupt injection through vlapic
interface -- this will not mess up vlapic and we can see hpet
timer interrupt coming continuously.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
we added uefi stub for hv, and want vm0 continue running under uefi env to
boot other uefi payload (osloader or bzImage).
during this, the uefi timer irq need be handled elegantly.
there are 3 types for uefi timer:
1. 8254 based on IRQ0 of PIC
2. HPET based on IOAPIC
3. HPET based on MSI
currently, we only support type 3 (HPET+MSI). But we are following a
in-correct flow to handle this timer interrupt:
- we set VMX_ENTRY_INT_INFO_FIELD directly if a timer interrupt happened
before vcpu launching, this will make its vlapic mess up, which finally
cause hpet timer stop.
this patch remove this in-correct approach, the new approach patch will
be followed by next patch.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to the explaination for pref_address
in Documentation/x86/boot.txt, a relocating bootloader
should attempt to load kernel at pref_address if possible.
But due to a non-relocatable kernel will unconditionally
move itself and to run at perf address, no need to copy
kernel to perf_address by bootloader.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
1. refine multiboot related code, move to /boot.
2. firmware files and ramdisk can be stitched in iasImage;
and they will be loaded as multiboot modules.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Add 'CPU_PAGE_MASK' used for calculate address,
Change IA32E_REF_MASK from 0x7ffffffffffff000 to 0x000ffffffffff000
for MMU/EPT entry, bit62:52(ignore) bit63(VE/XD)
if we want to obtain the address from the MMU/EPT entry,need to clear
bit63:52 by IA32E_REF_MASK
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
add key info structure
add sworld_eptp in vm structure, and rename ept->nworld_eptp
add secure world control structure
Change-Id:
Tracked-On:220921
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Zhao Yakui