Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Suppose run_ctx.cr0/cr4 are correct when do world switching, so call
vcpu_set_cr0/cr4() to update cr0/cr4 directly before resume to guest.
This design is only for trusty world switching.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1. move seed_info structure from trusty.h to seed.h
2. replace "#include <hypervisor.h>" with necessary including headers
in seed.c/seed_abl.c/seed_sbl.c
Tracked-On: #2777
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmx_cr0/vmx_cr4 from ext_context structure, they are duplicated
with cr0/cr4 fields in run_context.
Switch cr0/cr4 of run_context structure on demand when do world switch.
Remove vmx_cr0_read_shadow/vmx_cr4_read_shadow from ext_context structure.
These fields should be same for both normal world and secure world.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The init page tables installed in either cpu_primary.S or trampoline.S
are 1:1 mapping and won't be changed in the future.
The 'actual' hypervisor page table installed in enable_paging() is 1:1
mapping currently but it could be changed in the future. Both hva2hpa() and
hpa2hva() are implemented based on these page tables and can't be used
when the init page tables take effect.
This patch does the following cleanup:
- remove all hva2hpa()/hpa2hva() before calling enable_paging()
- get_hv_image_base() returns HVA, not HPA. So add hva2hpa() for all cases
that are called afte enable_paging().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Input parameter "bus" of assign_iommu_device/unassign_iommu_device may be from hypercall.
And the conext tables are static allocated according to CONFIG_IOMMU_BUS_NUM.
Need to check the bus value to avoid access invalid memory address with invalid value.
Tracked-On: #2743
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In order to remove the usage of hypervisor.h,
modularize the boot folder.
Current changes include modifications to remove
usage of acrn_vm structure pointer, from some of
the call, and remove calls to hypervisor.h,
as and when deemed fit.
Removed hva2gpa, as this was not used anywhere else
after the changes.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the 'cpu_mode' is unused in struct vm_guest_paging,
and there is the same variable in struct acrn_vcpu_arch
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN now has unified the way to handle SBL and UEFI.
so just remove corresponding macros in Kconfig.
BTW, default configuration in Kconfig is for UEFI boards.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
detect_apicv_cap should used to detect all the APICv capabilities. Besides,
"Virtualize x2APIC mode" doesn't depend on "APIC-register virtualization".
We shouldn't check "Virtualize x2APIC mode" support only when physical platform
supports "APIC-register virtualization"
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add two functions to combine constraint for APICv:
is_apicv_basic_feature_supported: check the physical platform whether support
"Use TPR shadow", "Virtualize APIC accesses" and "Virtualize x2APIC mode"
is_apicv_advanced_feature_supported: check the physical platform whether support
"APIC-register virtualization", "Virtual-interrupt delivery" and
"Process posted interrupts".
If the physical platform only support APICv basic feature, enable "Use TPR shadow"
and "Virtualize APIC accesses" for xAPIC mode; enable "Use TPR shadow" and
"Virtualize x2APIC mode" for x2APIC. Otherwise, if the physical platform support
APICv advanced feature, enable APICv feature for xAPIC mode and x2APIC mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Accessing memory of guest will cause page fault when SMAP is enabled.
This patch stac()/clac() correspondingly to get rid of this situation.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Except for few translation structures in x86 IOMMU, all translation
structures are 128-bit. All the translation structures used by ACRN
are 128 bit. So removed multiple definitions and defined a struct
that accomodates 128 bit entries.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In partition mode, unassign_iommu_device() is called from vpci_cleanup(),
so when shutdown_vm() is called, unassign_iommu_device() could fail because
of "domain id mismatch" and DMAR is not cleared.
Also move destroy_ept() after the call to destroy_iommu_domain().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previous change 'HV: modularization vm config code', commit id
1bb15c64a6, lost CAT code when move
sanitize_vm_config() from vm.c to vm_config.c
Tracked-On: #2291
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
platform_acpi_info.h should be BOARD specific so move the header file
to configs/$(CONFIG_BOARD)/ folder.
So the target acpi info file detect process is:
Compiler search for $(CONFIG_BOARD)_acpi_info.h under
hypervisor/arch/x86/$(CONFIG_BOARD)/ first (the file is supposed to be
generated by offline tool so it is not included in original source), if
found, then the file is the target acpi info file. If not and at the
same time the ENFORCE_VALIDATED_ACPI_INFO Kconfig was set, the compiler
will stop and hint user to add target acpi info file by offline tool.
If ENFORCE_VALIDATED_ACPI_INFO was unset, then compiler will continue to
search for platform_acpi_info.h as target acpi info file under
hypervisor/arch/x86/$(CONFIG_BOARD) folder (with this file we could bypass
ENFORCE_VALIDATED_ACPI_INFO check and benifit for development). If this
file is not exist, then hypervisor/arch/x86/configs/platform_acpi_info.h
will be included as final target acpi info.
The process should work for UEFI path also, with a valid platform acpi
info file, S3/S5 should work on UEFI platform.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change the config type of COM_IRQ from "hex" to "int"; make
it consistent with its default value.
Tracked-On: #2689
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This commit extracts the common logic of vlapic_calc_dest() and vlapic_calc_dest_lapic_pt()
to static inline functions, in order to make vlapic_calc_dest() clean and easy to read.
Tracked-On: #1842
Signed-off-by: Yan, Like <like.yan@intel.com>
We could simple the vector check for LVT IRQ by move this check to
vlapic_fire_lvt when the IRQ is fixed mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Set when the local APIC detects an illegal vector (one in the range 0 to 15)
in the message that it is sending. This occurs as the result of a write to the
ICR (in both xAPIC and x2APIC modes) or to SELF IPI register (x2APIC mode only)
with an illegal vector.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
LVT ERROR is an edge and fixed mode interrupt. We could call vlapic_accept_intr
to fire it directly. Otherwise, if LVT ERR vector is invalid, an invalid
interrupt will be accepted in IRR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Currently for pre-launched VMs, HV intends to do EPT mapping for all GPA
space, which implies that it wastes HPA to back PCI hole and other vE820
entries that are not backed by physical memory.
This patch solves this issue and fixes ve820 entries whose length is not
aligned to 4K, and changes the lowmem entry's start GPA from 1MB to 2MB.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ECS.bit31 is not used and always return 0 in SDM Vol.2A 3-195. It's a
standard way to indicate whether there is a hypervisor.
Tracked-On: #2490
Ref: https://lwn.net/Articles/301888/
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
get_dmar_info API is called from multiple functions in vtd.c. This patch
calls get_dmar_info once during init and uses the cached info during
runtime.
Tracked-On: #2657
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move 'init_iommu()' & 'ptdev_init()' before starting
all secondary cores to avoid access uninitialized resource
in partition mode.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- merge sharing_config.c and partition_config.c to vm_config.c;
- make vm_configs[] static;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enlarge hypervisor BSS section to support EPT mapping of additional
1G address space. This is used to support 64bit PCI bar whose address
is strictly above 4G.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enumarate capability of Cache Allocation Technology(CAT) on X86 platform,
when HV init the primary cpu. If CAT is supported, store its info
to global struct cat_hw_info.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IF CAT is supported, and we want setup initial values to
IA32_Type_MASK_n MSRs, We can define a global structure
platform_clos_array[PLATFORM_CLOS_NUM], it has 2 members:
1.msr_index, the MSR address of IA32_Type_MASK_n
2.clos_masky, the initial valuses
Global varible platform_clos_num is the number of IA32_Type_MASK_n,
from IA32_Type_MASK_0 to IA32_Type_MASK_<CLOS_MAX_NUM - 1>
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
Add sos_vm.h as a template in configs folder and is linked to
configs/$(CONFIG_BOARD)/sos_vm.h.
If customer need a board specific sos_vm.h, make a copy in
configs/$(CONFIG_BOARD)/ and replace the symbol link.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config
to make it consistent with naming of apl-mrb/kbl-nuc ...
The name change is also applied in Makefile to make sure compile success.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since it's only used in vlaic.c
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vm_active_cpus from vlapic.c to vm.h since it's vm related
not vlapic related.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
PDPTE registers should be loaded in PAE paging mode.
However, current code load PDPTE registers in long mode.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two bugs related to PDPT address calculation for PAE mode.
1. Current code doesn't ignore the "Ignored" fileds when load pdpt registers.
Mask the "Ignored" fileds according to SDM Figure 4-7 Vol3.
2. Current code only ignores 4bits instead of 5bits in low "Ignored" filed when
calculate PDPT address in PAE mode for guest memory address translation.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We need to parse dmar table on UP2+SBL, otherwise all
the interrupts from IOAPIC don't work.
Tracked-On: #2572
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
remove hypervisor.h from per_cpu.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move gva2hva() & hva2gpa() to guest_memory.c,
we will remove hypervisor.h in the future.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to SDM 17.3.1.1, for any fault-class exception except a
debug exception generated in response to an instruction breakpoint,
the value pushed for RF is 1.
This patch set Resume Flag for fault class exceptions.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DCR is initialized to 0 which means divisor shift is 1. Currently, both
are initialized to 0 which result in incorrect APIC timer counts if the
vLAPIC's DCR is never programmed.
This bug was exposed by OVMF because OVMF does not program DCR during
LAPIC initialization.
Tracked-On: #2543
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HV passes the return value of vmcall by register RAX unconditionally.
However, if the vmcall is undefined for a guest, RAX value of guest vcpu
should not be changed.
According to SDM Vol. 3C 30-9, VMCALL is allowed from any CPL in guest.
VMCALL is NOT allowed from CPL > 0 in vmx root mode.
ACRN hypervisor doesn't call VMCALL in vmx root mode, though.
In current code, ACRN also deny VMCALL from CPL > 0 in guest.
So for this case, #GP will not be injected, instead, modify the RAX to
notify the return value.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN HV hide VMX capability from guest. Only vmcall from SOS or some
specific vmcall from UOS are allowed.
Unsupported vmcall from UOS should be considered a "not in VMX operation" case,
and should be handled first according to SDM Vol. 3C 30-9.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For vcpu.c and vcpu.h,only include some necessary
header files, doesn't include hypervisor.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add VM configure files for Intel apl-mrb and dnv-cb2 platforms.
The board specific config header is named as partition_config.h and
the PCI passthrough device list is named as pt_dev.c under
hypervisor/arch/x86/configs/$CONFIG_BOARD folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move e820_default_entries[] from vm_description.c to ve820.c and rename
to ve820_entry[] as a temparary solution for partiton mode e820 management;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
CRx 'guest/host mask' is widely used when talking
about CR0/CR4 virtualization in SDM spec,
rename them to 'VMX_CRx_GUEST_HOST_MASK'.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds IR enable/disable APIs. Upon boot, enabling IR is
deferred until the first interrupt source is programmed. This is done
for UEFI platforms as UEFI bootloader depends on timer interrupt and
the programming of timer interrupt source is done before ACRN gets a
chance to run during boot.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When a corresponding IOMMU is found for the device, this patch adds
support to program Interrupt Remapping hardware RTEs and the original
interrupt sources (MSI or IOAPIC) with IR format.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Interrupt Remapping hardware in x86 can hold 64K entries with each entry
of size 16 bytes. So 256 entries occupy 4K. Adding a configuration for
developer to choose number of IR entries, in multiples of 256. ACRN does
not boot on platforms that does not support Interrupt Remapping and
Extended Interrupt Mode
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info, specifically ID, is needed to map the IOAPIC to
corresponding DMAR. DMAR table in ACPI has a field that has IOAPIC
ID, that matches the info provided in MADT. Both (IOAPIC info from
MADT and from DMAR) is needed for remapping IOAPIC interrupts.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As we enable Interrupt Remapping Hardware in ACRN, Queued Invalidation
(QI) needs to be used clear DMAR hardware caches. This patch introduces
Queued Invalidation APIs. Code related to Register based Invalidation
is removed from ACRN and platforms that do not support QI cannot boot
with ACRN after this patch.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
According to SDM 24.7.2, these two MSRs should be
configured with physical address.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With lapic_pt based on vlapic, guest always see vitual apic_id.
We need to convert the virtual apic_id from guest to physical apic_id
before writing ICR.
SMP for VM with lapic_pt is supported with this fix.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use smp_call_function() to read/write MSR register on target PCPU
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this magic number to prevent potential overflow when dumping
host stack.
Tracked-On: #2455
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As scheduler uses its own stack for now,
there is no need to check stack validity,
so wipe it out.
Tracked-On: #2455
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ASSERT could be used in some situations, such as, there are some pre-assumption
for some code, using ASSERT here for debug. It could not be used for detect error
when system booting where panic should be used.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Panic should only be used when system booting. Once the system boot done,
it could never be used. While ASSERT could be used in some situations, such
as, there are some pre-assumption for some code, using ASSERT here for debug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
Use bitmap_set_nolock/bitmap_clear_nolock instead of
bitmap_set_lock/bitmap_clear_lock for the local variable.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In current code, there is a logic bug when inject low priority
exceptions.
If guest irq enabled, low priority exception will not be injected to guest.
This patch fix the logic error, if there is no eligible vector before
handling low priority exceptions, then inject low priority exception if
any.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acrn doesn't support nested virtualization, so vmx operations should be
undefined opcode for guest.
Current code handle vmx operations with unhandled_vmexit_handler.
According to the spec, if guest execute vmx operation instruction, a #UD
exception should be inject.
This patch inject a #UD exception when guest execute vmx operation instruction.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Some arches have more than two IOMMUs, so change this limitation.
Tracked-On: #2435
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fixed violations in vlapic_x2apic_pt_icr_access()
- Procedure has more than one exit point;
- Value is not of appropriate type;
- Narrower init conversion without cast;
- Implicit conversion: actual to formal param (MR)
Fixed violation in switch_apicv_mode_x2apic()
- No space between if, while, for and expresn.
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since lapic is passed through, MSI/MSIx should be configured with the
vector allocated within guest OS, instead of physical vector allocated
in hypervisor.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Zide Chen