Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the >32MB limitation for 64bits mmio hole allocation, ACRN
hasn't met such buggy devices for this limitation. Besides, OVMF
has one bug which requires 64bits BAR must allocate from 4G+ address,
otherwise trigger assert. This patch can workaround it.
Tracked-On: #2577
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Limit 64 bits PCI BAR space from 0x100000000UL ~ 0x140000000UL,
as HV now only support 0x400000000UL+0x80000000 as top of guest memory
address. EPT table size is static allocated.
Tracked-On: #2577
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
patch is from Alex Du for IASL tool updated to support
ACPI 6.3 version.
Tracked-On: #2568
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Socket is not currently supported as backend for virtio-console.
Kata containers require socket backend for virtio-console in order to
communicate between the agent running in the VM and the proxy running
in the host. In order to support Kata with ACRN, this feature is required.
v1-->v2:
Prevent new accepts on an already established socket connection. This
removes the need for accepted_fd and accept_evp varibles introduced in
previous patch.
v2-->v3:
Fixed coding style and removed debug prints.
Tracked-On: #2448
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Need to properly remove and free its MMIO entry during deinit.
Tracked-On: #2453
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The dummy channels can emulate cbc lifecycle, cbc signal and cbc raw
channel instead canbox, and the feature can be enabled by ioc command
line within wakeup reason bit 24.
Tracked-On: #2481
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For virtio-blk, when the backend is a regular file, the discard
and
is implemented by fallocate(), but this function will not wait for
the discard command handled by disk.
So, add fdatasync to make sure the DISCARD is executed
synchronously.
Tracked-On: #2395
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2301
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2283
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Clear Linux complains about not finding RTC as a PNP device:
platform rtc_cmos: registered platform RTC device (no PNP device found)
This is a port of Bhyve vRTC's user-space logic.
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #888
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To avoid the race issue for mevent in uart, we introduce the
teardown callback to handle resource free case.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Make uart_init and uart_deinit internal functions. And make
uart_set_backend/uart_release_backend cover uart_init/uart_deinit
function.
This will make mevent teardown callback adding easier for uart_core.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Discard the input/output data when open tty file. To avoid the
mevent callback is triggered immediately when the fd is added to
epoll.
Also update the uart_drain only read the data from tty file when
fifo has available space.
Tracked-On: #2159
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
S3 emulation is complicated and greatly dependent on system timing,
hence this patch changes log level for some important logs to help
online debugging (could output log by modifing launch_uos.sh and
without re-compiling)
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Support DISCARD command is meaningful when eMMC usage is high or
there are lots of remove operations. For example, when Guest
Android is running, there will be lots of files being created and
removed. However, virtio-blk BE does not support DISCARD command,
data remove operation in UOS will not trigger erase in eMMC. After
period of time, the eMMC will be consumed out, and erase must be
done by eMMC firmware before writing any new data. This causes the
eMMC performance decrease in the whole system (SOS and UOS).
To solve the problem, DISCARD should be supported in virtio-blk BE.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistent with kernal code, change delete to discard.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace strlen function with strnlen function in device-model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace function sprintf with snprintf in device model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is an obvious bug, which releases memory but still access the
data on the released memory. It is risky operation, and may result
failing to do normal enumlation process. This patch is used to fix
it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB S3 virtualization logic is complicated and heavily affected by system
timing. To make the debugging work easily, change related log level to facilitate
quick bug fixing.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Zhao Yakui