This commit refactors vector allocation/free codes, two functions are
defined to help alloc/free vectors for an irq:
- uint32_t alloc_irq_vector(uint32_t irq)
- alloc a free vector (0x20 ~ 0xDF), and bind it to irq, for legacy irqs
and static mapped irqs, vector has been allocated and bind, so just
check the mapping correctness;
- return: valid vector on success, VECTOR_INVALID on failure.
- void free_irq_vector(uint32_t irq)
- free vector allocated via alloc_irq_vector(), for legacy irqs and static
mapped irqs, nothing need to do.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors the alloc/free irq num, two functions are defined:
- uint32_t alloc_irq_num(uint32_t irq)
- if irq is valid, mark the irq_desc as used; if it's IRQ_INVALID,
alloc a free irq, or else do nothing;
- return: irq num on success, or IRQ_INVALID on failure.
- void free_irq_num(uint32_t irq)
- free the irq num allocated via alloc_irq_num();
And a global spinlock to protect it from concurrent allocation/free.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It's not necessary to specify priority for dynamic allocated vector, because
nested irq is not supported on HV, and irq of any priority would cause VM exit.
This commit makes the following changes:
- remove the argument indicating priority in struct irq_request_info and
following functions:
ptdev_activate_entry()
find_available_vector()
irq_desc_alloc_vector()
normal_register_handler()
- change the macro of vector ranges:
VECTOR_DYNAMIC_START/END for dynamically allocable vectors;
VECTOR_FIXED_START/END for fixed allocated vectors, such as vector for
timer etc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Declare a variable with the static qualifier if it is of file scope and
not used in another file.
v1 -> v2:
* remove the unnecessary change to the following variables, which is
due to the report issue
struct multiboot_info *mbi = (struct multiboot_info *)
(HPA2HVA((uint64_t)boot_regs[1]));
struct multiboot_mmap *mmap =
(struct multiboot_mmap *)
HPA2HVA((uint64_t)mbi->mi_mmap_addr);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Parameter's type which is pointer should not be changed in the
scope of function,assign it's value to local variable to fixed
it out.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix x86 directory violations which related to integer problems,
some of problems are skipped because of ldra's false positive.
V1->V2 1.modified the code style
2.fix all macro VM_EXIT_IO_INSTRUCTION related
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Added brackets for expression to make it easy to understand and
reduce the mistake of precedence. The rule is applied to the
mixed same level of prevedence opeartors, high level presedence
operators and logical expression.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
NR_MAX_IRQS is defined as 272 and IRQ_INVALID as 273 which implies
that 272 is a valid irq number. In this case, an illegal access can
occur at run time when irq_desc_array[] or irq_count[] is accessed
with index 272. This fix stops the illegal access by renaming
NR_MAX_IRQS to NR_IRQS and then places proper conditions for range
checks. If the index is >= NR_IRQS, then index is invalid otherwise
its considered valid for accessing irq arrays. IRQ_INVALID definition
is also changed to 0xffffffffU to indicate maximum unsigned value.
Signed-off-by: Madeeha Javed <madeeha_javed@mentor.com>
This patch cleans up the integral-type-related violations after the access
pattern to RTEs is unified. Major changes include:
1. vioapic_mmio_read(), vioapic_mmio_write() and vioapic_mmio_rw() assumes
the size of the register to be accessed is always 4, which is checked in
vioapic_mmio_access_handler(). Thus they no longer takes the unused
''size'' parameter.
2. Typical integral-type-related violation fixes including 'U' suffixes,
type of local variables, conversion specification in format strings, etc.
v1 -> v2:
* Drop duplicated definitions to IOAPIC register offsets.
* Drop the ''size'' parameter of vioapic_mmio_[read|write] and
vioapic_mmio_rw since vioapic_mmio_access_handler() ensures that size is
always 4.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two different ways the current implementation adopts to access ioapic
RTEs:
1. As two 32-bit registers (typically named ''low'' and ''high''), or
2. As one 64-bit register (typically named ''rte'').
Two issues arise due to the mixed use of these two patterns.
1. Additional conversions are introduced. As an example, ioapic_get_rte()
merges two RTE fragments into a uint64_t, while some callers break it
back to ''low'' and ''high'' again.
2. It is tricky to choose the proper width of IOAPIC_RTE_xxx constants. SOS
boot failure is seen when they are 32-bit due to the following code:
/* reg is uint64_t */
vioapic->rtbl[pin].reg &= ~IOAPIC_RTE_REM_IRR;
while making them 64-bit leads to implicit narrowing when the RTEs are accessed
in the low & high pattern.
This patch defines a union ''ioapic_rte'' and unifies the access pattern
to IOAPIC and vIOAPIC RTEs.
v1 -> v2:
* Instead of two 32-bit ''low'' and ''high'', define a union that allows
either 32-bit or 64-bit accesses to RTEs.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The main focus on: constant suffix U/UL; parameters cast like
uint32 to a uint16 variable; unify some APIs interface,
consist with the callers.
also modify some places to unify code style
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Includes header file of non-static function, and declare the
in-file use function static.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires the use of brackets, even when there is only one
statement in the loop body.
Signed-off-by: Ying Liu <ying2.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch cleans up the remaining integral-related violations in ioapic.c,
including
* integral narrowing, and
* explicit conversion between signed & unsigned integers.
Tracked-on: ccm0001001-247033
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently IOAPIC pins are represented using various types, including uint16_t,
int, uint8_t and uint32_t. This patch converts all pins to uint8_t since the
maximum number of interrupt input pins per IOAPIC is limited to 240. The special
value IOAPIC_INVALID_PIN is defined to indicate that a valid pin cannot be
found.
This type clean up also has the following impacts.
* The values in the ''legacy_irq_to_pin'' table are piggybacked with their
trigger mode. This patch splits them as the piggyback prevents us from
using a uint8_t[] for this table, and these two information are never used
at the same time.
* The ''offset'' parameter in ioapic_read_reg32 & ioapic_write_reg32 are
promoted to uint32_t to minimize explicit type conversions and keep
aligned with the type of formal parameters of mmio_(read|write)_long.
Tracked-on: ccm0001001-247033
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The 23:16 bits in the IOAPIC version register is the highest entry in the I/O
redirection table, which is 1 smaller than the number of interrupt input
pins. But currently we use these bits directly as the number of pins.
This patch abstracts the pin count calculation code and adds 1 to the max rte
entry number to get the right pin count.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are multiple helpers for collecting info to be printed on the ACRN uart
console. They are unreachable code in release builds in which the uart console
is removed.
To define a precise boundary for safety-related activities, this patch wraps the
declarations and definitions to these helpers with "#ifdef HV_DEBUG" so that
these unreachable APIs will be dropped in release builds.
v1 -> v2:
* Fix coding style: no empty lines between #ifdef and the wrapped code.
* Also drop get_rte_info() in ioapic.c, which is solely used by
get_ioapic_info().
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the type for vector in ioapic setup, which is a potential problem:
- return VECTOR_INVALID instead of false in irq_desc_alloc_vector()
when irq is out of range;
- change variable type from int to uint32_t for vector, and correct
the returned value check.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
These two functions will be called when ACRN enter/exit S3.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yan Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently irq and vector numbers are used inconsistently.
* Sometimes vector or irq ids is used in bit operations, indicating
that they should be unsigned (which is required by MISRA C).
* At the same time we use -1 to indicate an unknown irq (in
common_register_handler()) or unavailable irq (in
alloc_irq()). Also (irq < 0) or (vector < 0) are used for error
checking. These indicate that irq or vector ids should be signed.
This patch converts irq and vector numbers to unsigned 32-bit integers, and
replace the previous -1 with IRQ_INVALID or VECTOR_INVALID. The branch
conditions are updated accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch drops "#include <bsp_cfg.h>" and include the generated config.h in
CFLAGS for the configuration data.
Also make sure that all configuration data have the 'CONFIG_' prefix.
v4 -> v5:
* No changes.
v3 -> v4:
* Add '-include config.h' to hypervisor/bsp/uefi/efi/Makefile.
* Update comments mentioning bsp_cfg.h.
v2 -> v3:
* Include config.h on the command line instead of in any header or source to
avoid including config.h multiple times.
* Add config.h as an additional dependency for source compilation.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This is to do the clean-up of IOAPIC mmio-access. Use the same API to
access the IOAPIC register. At the same time it also helps to avoid the
optimization in direct access mode.(The volatile is already added in
mmio_read_long/mmio_write_long)
V1->V2: Follow Fengwei's suggestion to use the mmio_read/write_long
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Yan, Like