With current code, memcpy rsdp to 0x500 maybe overwrite uefi
code/data region.
So remove the legacy BIOS deliver method of RSDP, which need copy
the RSDP to EBDA space which is addressed by the 16bit pointer
at 0x40E or upper memory BIOS space 0xe0000-0xfffff. And just
deliver the pointer of RSDP, which is already saved in UEFI system
table, to hypervisor.
Create a function named efi_init() to separate efi initialize code.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Currently, the serial log is printed through IO(0x3f8).
Secure World will print serial log by port 0x3f8. So
remove the ASSERT for Secure World booting.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For trusty bring-up, key_info is needed.
Currently, bootloader did not transfer key_info to hypervisor.
So in this patch, use dummy key_info temporarily.
Derive vSeed from dSeed before trusty startup, the vSeed will
bind with UUID of each VM.
Remove key_info from sworld_control structure.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
UOS_Loader will trigger boot of Trusty-OS by HC_INITIALIZE_TRUSTY.
UOS_Loader will load trusty image and alloc runtime memory for
trusty. UOS_Loader will transfer these information include
trusty runtime memory base address, entry address and memory
size to hypervisor by trusty_boot_param structure.
In hypervisor, once HC_INITIALIZE_TRUSTY received, it will create
EPT for Secure World, save Normal World vCPU context, init
Secure World vCPU context and switch World state to Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For ARM, The SMC instruction is used to generate a synchronous
exception that is handled by Secure Monitor code running in EL3.
In the ARM architecture, synchronous control is transferred between
the normal Non-secure state and the Secure state through Secure
Monitor Call exceptions. SMC exceptions are generated by the SMC
instruction, and handled by the Secure Monitor.The operation of
the Secure Monitor is determined by the parameters that are passed
in through registers.
For ACRN, Hypervisor will simulate SMC by hypercall to switch vCPU
State between Normal World and Secure World.
There are 4 registers(RDI, RSI, RDX, RBX) reserved for paramters
passing between Normal World and Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Now, we could use option:
-s 3,virtio-blk,/XXXX_vdisk_file,b
to show this virtio device is boot device for guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some guests needs guest partition info passed to support
A/B boot. DM needs to load guest partition info from file
and pass to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two things here:
1. Enable basic vsbl boot functionality.
2. add long option to DM to specific vsbl file. So DM could
choice to boot guest with vsbl.
It's hard to find a suitable short option. So only long option
is supported for vsbl file name option.
If long option "--vsbl='vsbl_file_name'" is given in DM
commandline, the "vsbl_file_name" will be loaded by DM
first and running. vsbl will be response to lead guest to
next boot stage.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Will update e820 table to mark the address ACPI specific type.
Also need pass ACPI table start address and size to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
To align with file name, acrn_sw_load_direct() is changed
to acrn_sw_load_bzimage().
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
gcc8 showed following errors when build DM:
error: argument to ‘sizeof’ in ‘strncpy’ call is the same
expression as the source; did you mean to use the size of the
destination? [-Werror=sizeof-pointer-memaccess]
It looks like wrong parameter was given to strncpy.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
replace "=" with "?=", if variable is defined, don't redefine.
replace POSTLD with OBJCOPY
fix the variable LD assignment
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
for release version, the vuart is not be used - pin 4 then is not used
by hypervisor.
this patch adds check for vm0->vuart to distinguish it.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
functions ptdev_build_physical_rte & activate_physical_ioapic
doesn't need to get parameters like phys_irq, ptdev_intx_info or vector
from caller, instead they can derive from entry.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_list from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
ASSERT is only for debug purpose, for release version, it should try
error handling instead of deadloop there.
v1:
- change the ASSERT under release version to empty code
TODO: revise all ASSERT usage
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong (Eddie.dong@intel.com)
The common loader code is put to sw_load_common.c
The loader code for directly kernel loading is put to sw_load_bzimage.c
The further change for SBL will be put to sw_load_sbl.c
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
New compiler options introduced by commit
519c4285cf will cause DM compile failure
which caused by warnings from some snprintf usage might be truncated.
Expanding the string buffer to make compiler happy.
v3: change format string
v2: Address comment from Hao, shrink bident string size to satify
tname length in blockif_open.
Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Some virtio PCI devices can change the device configuration state, as
reflected in the device-specific configuration region of the device. In
this case:
* If MSI-X capability is disabled:
1. Set the second lower bit of the ISR Status field for the device
2. Send the appropriate PCI interrupt for the device.
* If MSI-X capability is enabled:
1. If config_msix_vector is not NO_VECTOR, request the appropriate
MSI-X interrupt message for the device, config_msix_vector sets
the MSI-X Table entry number.
A single interrupt MAY indicate both that one or more virtqueue has been
used and that the configuration space has changed.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
microcode update from UOS is disabled.
microcode version checking is available for both SOS and UOS.
There are two TODOs of this patch:
1. This patch only update the uCode on pCPUs SOS owned. For the
pCPUs not owned by SOS, the uCode is not updated. To handle
this gap, we will have SOS own all pCPUs at boot time. So
all pCPUs could have uCode updated. This will be handled
in the patch to enable SOS own all pCPUs at boot time.
2. gva2gpa now doesn't check possible page table walk failure.
Will add the failure check in gva2gpa in different patch.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu (anthony.xu@intel.com)
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Add a global boot_cpu_data to cache common cpu capbility/feature
for detect cpu capbility/feature.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As mentioned in https://github.com/projectacrn/acrn-documentation/pull/38
on some operating systems, the ``gnu-efi`` package installs the
linker under a ``gnuefi`` folder in ``${LIBDIR}``. This is the
case in Fedora for example. Check if the gnuefi folder is there
and use it if it is in the path to the linker. This PR fixes the
Makefile rather than documenting how to edit it yourself.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
this patch is to detect and enable only APICv features which
are actually supported by the processor, instead fo tuning on
all features by default.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
-If "virtual-interrupt delivery" VM-execution control is 0,
Processor will causes an APIC-write VM exit if page offset
is 0xB0 (EOI), SDM Vol3, Chapter 29.4.3
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Update the build dependency for Fedora. 'gnu-efi' was listed as
a dependency but it's actually 'gnu-efi-devel' that we need else
the header file ('efi.h') is not installed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
IPU devices are using I2C device with physical BDF 0:16.0.
The I2C controller has the dependency on ACPI info.
This patch is to add ACPI info for the I2C controller and the two IPU
devices that are under the scope of I2C.
Note:
This patch is specific for GP platform.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
this patch save native lapic configuration and restore it to vm0's vlapic
before its running, then doing hpet timer interrupt injection through vlapic
interface -- this will not mess up vlapic and we can see hpet
timer interrupt coming continuously.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
we added uefi stub for hv, and want vm0 continue running under uefi env to
boot other uefi payload (osloader or bzImage).
during this, the uefi timer irq need be handled elegantly.
there are 3 types for uefi timer:
1. 8254 based on IRQ0 of PIC
2. HPET based on IOAPIC
3. HPET based on MSI
currently, we only support type 3 (HPET+MSI). But we are following a
in-correct flow to handle this timer interrupt:
- we set VMX_ENTRY_INT_INFO_FIELD directly if a timer interrupt happened
before vcpu launching, this will make its vlapic mess up, which finally
cause hpet timer stop.
this patch remove this in-correct approach, the new approach patch will
be followed by next patch.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Linux kernel CF9 reboot is doing things like:
- read value from 0xcf9
- mask out the value according to the reboot type (warm vs cold)
- BIT OR the value with reboot code
- write the value to 0xcf9
If there are two reboot event and the first one is cold
reboot and the second one is warm reboot, vsbl query
reboot type after the second one and will get code reboot
instead of warm reboot.
We should clear the data of 0xcf9 if guest request cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
There are bootloaders require cold reboot as ACPI reboot
instead of warm reboot.
So we set 0xE to reset value of FADT to make ACPI reboot
cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Zheng, Gen