Given the reality that some of ACPI configrations are unlikey changed,
move these MACROs to a default header file.
The platform_acpi_info.h still has chance to override the default
definition by #undef with offline tool.
Tracked-On: #1520
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Input 'pin' should be less than 'NR_VPIC_PINS_TOTAL'
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
irq 4 is sharing with idma, after change vuart to level trigger, the idma
driver could handle this irq 4 and send out EOI, which cause the irq storm.
move vuart irq to a not used 6.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1476
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Not return NULL for vcpu_from_vid
We have replaced dynamic memory with static memory for vcpu,
then if vcpu_id is valid, this API should not return NULL.
-- Simplify the for-loop when walk through the vcpu
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, the DRHD data is hardcoded in sbl.c. Replace the data
with MACROs which defined in platform_acpi_info.h as it could be parsed
by offline tool.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The base address of LAPIC and IOAPIC should be parsed from MADT table,
so move the definition to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The I/O APIC number should be parsed from host ACPI table, so move the
definition from Kconfig to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace platform_acpi_info.c with platform_acpi_info.h and define needed
host ACPI info in MACROs. Then the struct host_acpi_info is not needed
any more.
This header file should be generated by offline tool automatically;
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ABL pass seed_lists to HV through different interface/structures.
So, in this patch, add interface to retrieve seed from ABL and refactor
the seed parsing logic.
Tracked-On: #1488
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
@vioapic_set_pinstate() & vioapic_need_intr(),
add checking input value range for 'pin'.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM 6.5 exception classification, if the fault
happens, the CPU will return to the faulting instruction. So
we shouldn't change rip to the next instruction if inject fault
to guest.
Tracked-On: #1473
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
Let OBJS target depend on VERSION file instead of other targets like
install/all depending on it, since the version.h is being included in
.c files.
This fixes a following compilation issue:
| In file included from include/hv_debug.h:10,
| from include/hypervisor.h:37,
| from arch/x86/cpu.c:7:
| arch/x86/cpu.c: In function 'bsp_boot_post':
| arch/x86/cpu.c:453:4: error: 'HV_FULL_VERSION' undeclared...
Tracked-On: #1441
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Return value should be checked,fix it by add
"void" when the function return value is not used.
V1->V2:
replace printf with pr_warn.
V2->V3:
change the commit to make read easily.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
An issue reported on KBL NUC (No APIC-V), when runing GVT test
case, it is easily to cause SOS/UOS hung. This patch is to root
cause it and how to avoid it.
On some platforms with no APIC-V support, this modidication can
avoid SOS hung when no IRR but event pending bit set.
If no APIC-V, interrupt injection will use IRR in vLAPIC and
event pending bitmap; work logic as following (set ABC for notes):
1. in ISR or when UOS send an interrupt to SOS/VHM (like IO request),
step A: set IRR --> step B: set event pending bit;
2. in SOS event handing, step C: check/clear event pending bit -->
step D: probe/get IRR --> step E: clear/handle IRR.
3. after that, it will probe IRR again to check if other IRR left:
step F: probe IRR --> step G: set event pending bit --> step H:
enable IRQ window in VMX.
Before, from step C to D, if pending bit checked, but no IRR, it will
return -1, then the CPU will goto ZOMBIE status. It can cause
SOS hung. It can happen occasionally under following case :
4. between UOS step A and step B, SOS can goto step F, so it
gets IRR, and step G --> step H, then SOS enter non-root mode, for
IRQ window enabled, it will cause vmexit to continue step C/D/E.
5. then UOS does step B, to set pending bit, but no IRR now. When next
vmexit, SOS does step C and D, it can't get IRR, failure happens.
In summary, a failed case steps: A-->F-->G-->H-->C-->D-->E-->B-->C-->D
So we allow that when event pending bit checked, IRR could be cleared
already.It just wastes one probe time occasionally.
Tracked-On: #1363
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use pin_state[pin] to record vpic pin signal, and change the interface name
accordingly.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now we have name reuse definitions in hypervisor as following:
"enum cpu_state cpu_state" in per_cpu.h,
"struct shell_cmd *shell_cmd" in shell_priv.h.
MISRAC requires that tag names shall not be reused anywhere
with in a program.So these definitions violate MISRAC rules
"identifier resue".This patch is used to fix it.
1. modify the definitions to "enum pcpu_boot_state boot_state"
and "struct shell_cmd *cmds".
2. modifty the relevant usage.
v1->v2
update commit message to be more explicit.
v2->v3
update the enum definition.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, UOS will use hypercall to init BSP state, we could remove
set_bsp_real_mode_entry() and set_bsp_protect_mode_regs().
For SOS, GDT will inherit from SBL or UEFI. For UOS, DM will
prepare GDT. We don't need hypervisor to prepare GDT for guest.
The entry_addr of vcpu struct could be removed. The guest entry
is set through BSP rip register.
GUEST_CFG_OFFSET is not needed any more after this patchset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vcpu mode set to function vcpu_set_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For UOS, there is no BSP init state saved in hv. We always need
DM to set BSP init state by using hypercall. So we can't auto
start vm during vm reset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DM will use this hypercall to initialize the UOS BSP state.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use customized function to generate proper config.h
which depend on kconfig,write the customized format
to support it.
V1->V2:
Add comments.
Tracked-On: #861
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use genld.sh instead of config.h to generate link_ram.ld.
It can avoid the conflicts of the syntax between ld script and
C.
V1->V2:
change the deps name to config,
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
From SDM Vol3 26.3.2.5:
Once the virtual interrupt is recognized, it will be delivered in VMX
non-root operation immediately after VM entry(including any specified
event injection) completes.
So the hardware can handle vmcs event injection and evaluation/delivery
of apicv virtual interrupts in one time vm-entry.
This patch move the apicv irr/rvi sync before handle vmcs events
injection. The old code cause the apicv virtual interrupt evaluation and
delivery be handled until next vm-exit if met pending exceptions.
Tracked-On: #1443
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We move the SOS BSP state init to vm loader and drop
function init_guest_context_vm0_bsp.
Update the definition of vm0_boot_context to fix code
violations.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reset_vcpu_regs function will reset the vcpu registers to
default value: realmode with entry 0xFFFFFFF0
Make call to reset_vcpu_regs during create_vcpu and reset_vcpu
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TR selector initianlization using pre-defined HOST_GDT_RING0_CPU_TSS_SEL
rather than loading from register. Instead calculating real base address
of TSS based on TR selector and gdt, getting it from per cpu data.
Tracked-On: #1394
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
'target_vm' returned from 'get_vm_from_vmid()' maybe NULL,
passing to 'is_vm0()' without check.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
COM1_IRQ's polarity setting is from ACPI table, as hypervisor do not want
to parse ACPI table here, it just get the configuration from vioapic RTE
setting as a work-around.
TODO:
Here should assert vuart irq according to COM1_IRQ polarity. The best way
is to get the polarity info from ACIP table. But we just get the info from
vioapic configuration. Based on this, we can still have irq storm during
guest modify the vioapic setting.
As it's only for debug uart, we want to make it as an known issue.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1432
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
In the current hypervisor design, when HPA is not
found for the specified gpa by calling gpa2hpa or
local_gpa2hpa, 0 will be returned as a error code,
but 0 may be a valid HPA for vm0; error checking
is missed when invoking gpa2hpa or local_gpa2hpa;
when invoking lookup_address, the caller guarantees
that parameter pointer pml4_page and pointer pg_size
is not NULL.
If local_gpa2hpa/gpa2hpa returns a invalid HPA,
it means that this function fails to find the
HPA of the specified gpa of vm. If local_gpa2hpa/gpa2hpa
return value is a valid HPA, it means that this
function have found the HPA of the specified gpa of vm.
Each valid vm's EPTP is initialized during vm creating,
vm's EPTP is valid until this vm is destroyed. So the caller
can guarantee parameter pointer pml4_page is not NULL.
The caller uses a temporary variable to store page size.
So the caller can guarantee parameter pointer pg_size
is not NULL.
In this patch, define a invalid HPA for gpa2hpa and
local_gpa2hpa;add some error checking when invoking
local_gpa2hpa/gpa2hpa;add precondition for lookup_address
function and remove redundant error checking.
V1-->V2:
Define INVALID_HPA as a invalid HPA for gpa2hpa
and local_gpa2hpa;
Updated related error checking when invoking
gpa2hpa or local_gpa2hpa;
V2-->V3:
Add some debug information if specified gpa2hpa
mapping doesn't exit and ept_mr_del is called;
Update INVALID_HPA definition easier to be reviewed.
V3-->V4:
Add vm->id and gpa into pr_error;
Add precondition to ept_mr_del to cover [gpa,gpa+size)
unmapping case.
V4-->V5:
Update comments;
Update pr_error message.
Tracked-On: #1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
- improve the readability of ept_cap_detect
right shift 32 bits of msr_val to check bits 63:32 of msr_val
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because of the return type inconsistent,change the
sbuf return type to uint32_t to fix it,and make the
pre-condition to check the parameter whether is NULL.
V1->V2:
1.add () to bool expression
2.add pre-assumption to sbuf_get and sbuf_put
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Expression should be boolean immediate before 'if','while' key-words.
V1->V2 add () to bool expression
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Page table operation would not fault except:
1. the hypervisor it out of memory to allcate a page for page table operation
2. there is a bug with page table operation in hypervisor or devicemodle
While we assue that these would not happened in our platform when release, so
there is no need to check whether there is a fault with page table operation. However,
for debug version, we would panic the hypervisor if we can't meet the conditions really.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Sometimes we need to invalidate cached translation information for guest
when change some bits in CR0/CR4 which related to paging. Here're two cases:
1. If there change some bits to enable/disable paging (mode) or access rights.
For CR0: PG/WP/CD/NW; For CR4: PGE/PSE/PAE/SMEP/SMAP/PKE
2. When guest using PAE paging, we should reload the PDPTE registers sometimes,
detail in SDM Vol 3 Chap 4.4.1 and Chap 4.11.1
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add is_long_mode to check whether the processor is operating in IA-32e mode
add is_paging_enabled to check whether paging is enabled
add is_pae to check whether physical address extension is enabled.
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Victor Sun