'param' is BDF value instead of GPA when VHM driver
issues below 2 hypercalls:
- HC_ASSIGN_PTEDEV
- HC_DEASSIGN_PTDEV
This patch is to remove related code in hc_assign/deassign()
functions.
Tracked-On: #4334
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
SOS will use PCIe ECAM access PCIe external configuration space. HV should trap this
access for security(Now pre-launched VM doesn't want to support PCI ECAM; post-launched
VM trap PCIe ECAM access in DM).
Besides, update PCIe MMCONFIG region to be owned by hypervisor and expose and pass through
platform hide PCI devices by BIOS to SOS.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Use Enhanced Configuration Access Mechanism (MMIO) instead of PCI-compatible
Configuration Mechanism (IO port) to access PCIe Configuration Space
PCI-compatible Configuration Mechanism (IO port) access is used for UART in
debug version.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Currently, config tool will maintain a whitelist for the board which
need to hide some pci devices. For the board out of whitelist, we set
MAX_HIDE_PDEVS_NUM to 0.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch overwrites the idle driver of service OS for industry, sdc,
sdc2 scenarios. HLT will be used as the default idle action.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HLT emulation is import to CPU resource maximum utilization. vcpu
doing HLT means it is idle and can give up CPU proactively. Thus, we
pause the vcpu thread in HLT emulation and resume it while event happens.
When vcpu enter HLT, its vcpu thread will sleep, but the vcpu state is
still 'Running'.
VM ID PCPU ID VCPU ID VCPU ROLE VCPU STATE
===== ======= ======= ========= ==========
0 0 0 PRIMARY Running
0 1 1 SECONDARY Running
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Sometimes HV wants to know if there are pending interrupts of one vcpu.
Add .has_pending_intr interface in acrn_apicv_ops and return the pending
interrupts status by check IRRs of apicv.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce two kinds of events for each vcpu,
VCPU_EVENT_IOREQ: for vcpu waiting for IO request completion
VCPU_EVENT_VIRTUAL_INTERRUPT: for vcpu waiting for virtual interrupts events
vcpu can wait for such events, and resume to run when the
event get signalled.
This patch also change IO request waiting/notifying to this way.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This simple event implemention can only support exclusive waiting
at same time. It mainly used by thread who want to wait for special event
happens.
Thread A who want to wait for some events calls
wait_event(struct sched_event *);
Thread B who can give the event signal calls
signal_event(struct sched_event *);
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we enabled cpu sharing, PAUSE-loop exiting can help vcpu
to release its pcpu proactively. It's good for performance.
VMX_PLE_GAP: upper bound on the amount of time between two successive
executions of PAUSE in a loop.
VMX_PLE_WINDOW: upper bound on the amount of time a guest is allowed to
execute in a PAUSE loop
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, wait_pcpus_offline() and make_pcpu_offline() are called by
both shutdown_vm() and reset_vm(), but this is not needed when lapic_pt is
not enabled for the vcpus of the VM.
The patch merged offline pcpus part code into a common
offline_lapic_pt_enabled_pcpus() api for shutdown_vm() and reset_vm() use and
called only when lapic_pt is enabled.
Tracked-On: #4325
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the name of the Docker Container image that is used to build the kernel
for an RTVM (Preempt-RT kernel) when that image was built by the user
him/herself.
Tracked-On: #4322
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. This patch passes-through CR4.PCIDE to guest VM.
2. This patch handles the invlidation of TLB and the paging-structure caches.
According to SDM Vol.3 4.10.4.1, the following instructions invalidate
entries in the TLBs and the paging-structure caches:
- INVLPG: this instruction is passed-through to guest, no extra handling needed.
- INVPCID: this instruction is passed-trhough to guest, no extra handling needed.
- CR0.PG from 1 to 0: already handled by current code, change of CR0.PG will do
EPT flush.
- MOV to CR3: hypervisor doesn't trap this instrcution, no extra handling needed.
- CR4.PGE changed: already handled by current code, change of CR4.PGE will no EPT
flush.
- CR4.PCIDE from 1 to 0: this patch handles this case, will do EPT flush.
- CR4.PAE changed: already handled by current code, change of CR4.PAE will do EPT
flush.
- CR4.SEMP from 1 to 0, already handled by current code, change of CR4.SEMP will
do EPT flush.
- Task switch: Task switch is not supported in VMX non-root mode.
- VMX transitions: already handled by current code with the support of VPID.
3. This patch checks the validatiy of CR0, CR4 related to PCID feature.
According to SDM Vol.3 4.10.1, CR.PCIDE can be 1 only in IA-32e mode.
- MOV to CR4 causes a general-protection exception (#GP) if it would change CR4.PCIDE
from 0 to 1 and either IA32_EFER.LMA = 0 or CR3[11:0] ≠ 000H
- MOV to CR0 causes a general-protection exception if it would clear CR0.PG to 0
while CR4.PCIDE = 1
Tracked-On: #4296
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM Vol.3 Section 25.3, behavior of the INVPCID
instruction is determined first by the setting of the “enable
INVPCID” VM-execution control:
- If the “enable INVPCID” VM-execution control is 0, INVPCID
causes an invalid-opcode exception (#UD).
- If the “enable INVPCID” VM-execution control is 1, treatment
is based on the setting of the “INVLPG exiting” VM-execution
control:
* If the “INVLPG exiting” VM-execution control is 0, INVPCID
operates normally.
* If the “INVLPG exiting” VM-execution control is 1, INVPCID
causes a VM exit.
In current implementation, hypervisor doesn't set “INVLPG exiting”
VM-execution control, this patch sets “enable INVPCID” VM-execution
control to 1 when the instruction is supported by physical cpu.
If INVPCID is supported by physical cpu, INVPCID will not cause VM
exit in VM.
If INVPCID is not supported by physical cpu, INVPCID causes an #UD
in VM.
When INVPCID is passed-through to VM, According to SDM Vol.3 28.3.3.1,
INVPCID instruction invalidates linear mappings and combined mappings.
They are required to do so only for the current VPID.
HV assigned a unique vpid for each vCPU, if guest uses wrong PCID,
it would not affect other vCPUs.
Tracked-On: #4296
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Pass-through PCID related capabilities to VMs:
- The support of PCID (CPUID.01H.ECX[17])
- The support of instruction INVPCID (CPUID.07H.EBX[10])
Tracked-On: #4296
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN relies on the capability of VPID to avoid EPT flushes during VMX transitions.
This capability is checked as a must have hardware capability, otherwise, ACRN will
refuse to boot.
Also, the current code has already made sure each vpid for a virtual cpu is valid.
So, no need to check the validity of vpid for vcpu and enable VPID for vCPU by default.
Tracked-On: #4296
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
/proc/cpuinfo represents online CPUs only, and the number of CPUs is
limited by the 'maxcpus' option.
/sys/devices/system/cpu/possible is a better option for our purpose
since it represents the possible CPUs that can ever be available in the
system, including the offline CPUs. And it's not limited by 'maxcpus'.
Though the Linux command line parameter nr_cpus and possible_cpus still
have impact on /sys/devices/system/cpu/possible.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
* Add more details about Kata Containers and ACRN in the introduction
* Adjust and correct some of the instructions
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Do reset for passthrough PCI device by default when assigning it to post-launched
VM:
1. modify opt "reset" to "no_reset" -- could enable no_reset for debug only
2. remove "ptdev_no_reset" opt. It could be replaced by setting "no_reset" for
each passthrough device.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Before we assign a PT device to post-launched VM, we should reset the PCI device
first. However, ACRN hypervisor doesn't plan to support PCIe hot-plug and doesn't
support PCIe bridge Secondary Bus Reset. So the PT device must support FLR or PM
reset. This patch do this check when assigning a PT device to post-launched VM.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since we restore BAR values when writing Command Register if necessary. We don't
need to trap FLR and do the BAR restore then.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
When PCIe does Conventinal Reset or FLR, almost PCIe configurations and states will
lost. So we should save the configurations and states before do the reset and restore
them after the reset. This was done well by BIOS or Guest now. However, ACRN will trap
these access and handle them properly for security. Almost of these configurations and
states will be written to physical configuration space at last except for BAR values
for now. So we should do the restore for BAR values. One way is to do restore after
one type reset is detected. This will be too complex. Another way is to do the restore
when BIOS or guest tries to write the Command Register. This could work because:
1. The I/O Space Enable bit and Memory Space Enable bits in Command Register will reset
to zero.
2. Before BIOS or guest wants to enable these bits, the BAR couldn't be accessed.
3. So we could restore the BAR values before enable these bits if reset is detected.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- target vm_id of vuart can't be un-defined VM, nor the VM itself.
- fix potential NULL pointer dereference in find_active_target_vuart()
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM 10.12.5.1 vol.3, local APIC should keep LAPIC state after receiving
INIT. The local APIC ID register should also be preserved.
Tracked-On: #4267
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch abstract a vcpu_reset_internal() api for internal usage, the
function would not touch any vcpu state transition and just do vcpu reset
processing. It will be called by create_vcpu() and reset_vcpu().
The reset_vcpu() will act as a public api and should be called
only when vcpu receive INIT or vm reset/resume from S3. It should not be
called when do shutdown_vm() or hcall_sos_offline_cpu(), so the patch remove
reset_vcpu() in shutdown_vm() and hcall_sos_offline_cpu().
The patch also introduced reset_mode enum so that vcpu and vlapic could do
different context operation according to different reset mode;
Tracked-On: #4267
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_xxx_write_handler() to vlapic_write_xxx() to make code more
readable;
Tracked-On: #4268
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some MACROs in lapic.h are duplicated with apicreg.h, and some MACROs are
never referenced, remove them.
Tracked-On: #4268
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM 10.4.7.1 vol3, the LVT register should be reset to 0s except for the
mask bits are set to 1s.
In current code, the lvt_last[] has been set to correct value(i.e. 0x10000) in
vlapic_reset() before enforce setting vlapic->lvt_last[i] to 0U, add the loop
that set vlapic->lvt_last[i] to 0 would lead to get zero when read LVT regs
after reset, which is incompiant with SDM;
Tracked-On: #4266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Structure pci_vbar is used to define the virtual BAR rather than physical BAR.
It's better to name as pci_vbar.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There's no need to check which capability we care at the very beginning. We could
do it later step by step.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch refactors the CMD_OPT_LAPIC_PT case branch
to explicity add the dependency of option RTVM at the
same branch, it is decoupled from the next case branch
to comply with strict code standard and improve the
code readability.
Tracked-On: #4283
Signed-off-by: Gary <gordon.king@intel.com>
Split the input message for 'virtio-net' would discard extra
message from user input, this is not expected for 'virtio-net' setting.
Tracked-On: #4298
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse and get 'cpu_sharing' item value
from launch config files, these values are editable by user.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Per ACPI 6.2 spec, chapter 5.2.5.2 "Finding the RSDP on UEFI Enabled Systems":
In Unified Extensible Firmware Interface (UEFI) enabled systems, a pointer to
the RSDP structure exists within the EFI System Table. The OS loader is provided
a pointer to the EFI System Table at invocation. The OS loader must retrieve the
pointer to the RSDP structure from the EFI System Table and convey the pointer
to OSPM, using an OS dependent data structure, as part of the hand off of
control from the OS loader to the OS.
So when ACRN boot from direct mode on a UEFI enabled system, hypervisor might
be failed to get rsdp by seaching rsdp in legacy EBDA or 0xe0000~0xfffff region,
but it still have chance to get rsdp by seaching it in e820 ACPI reclaimable
region with some edk2 based BIOS.
The patch will search rsdp from e820 ACPI reclaim region When failed to get
rsdp from legacy region.
Tracked-On: #4301
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missed definition of 'logger_setting' into launch script.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous launch config tool doesn't handle the situation that
'virtio-blk' is set with rootfs partition with rootfs image,
in such scenario, VM would be failed to start when launching
This patch refine the mount device while use rootfs partiton and image
from vritio block device.
Tracked-On: #4248
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UOS would be failed to get ip address, add 'tap_' perfix for virtio-net
name setting.
Tracked-On: #4255
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Yonghua Huang