Hook ssram init && de-init functions to vdev
devices lifecycle management:
1) initialize ssram when vdev devices
are initialized.
2) de-initialize ssram when vdev devices
are reset or destroyed.
notes:
ssram configuration data can be released only when
user VM shutdown, hence it can't be done in deinit_vssram().
- VM reboot:
do deinit_vssram() only.
- VM shutdown:
do both deinit_vssram() and clean_vssram_config().
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add TCC native memory hierarchy entries to vRTCT:
- wrap one function to get TCC RTCT data.
- Add memory hierarchy entries from TCC
RTCT to vRTCT.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
add all L2 & L3 cache buffers to RTCT entries:
- SSRAM WAY_MASK entry, cache ways bitmask indicates
the cache ways used by specific cache buffer.
- SSRAM region entry, support format V2 only.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch initializes below entries in vRTCT:
- Hardcode ACPI header
- Hardcode RTCT compatibility entry, support RTCT v2 only
for ACRN user VMs.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add EPT mapping for all L2 & L3 vSSRAM buffers
for user VM.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu1 Wang <yu1.wang@intel.com>
This patch allocates cache buffers from native TCC
buffer driver and do setup, make them ready to be
mapped to ACRN user VMs as software SRAM regions.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu1 Wang <yu1.wang@intel.com>
- wrap TCC driver interface to get SSRAM regions count
and region configuration.
- add function to load configurations of all SSRAM regions.
- Add header file to describe TCC data structure.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch figures out the guest cache hierarchy:
- calculate the cache hierarchy parameters, including
cache thread sharing number and inclusiveness of LLC.
- define and initialize data structure to describe
L2 & L3 cache buffers, these buffers will be mapped
to user VM as ssram regions.
- add some utility functions.
- complete the implementation of function
'create_ssram_rtct_entries()', though most functions
inside are not implemented yet.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu1 Wang <yu1.wang@intel.com>
1) With this patch, '--ssram' option is updated to enable
vSSRAM feature support for ACRN user VMs.
'--ssram' argument of Device Model shall follow below format:
--ssram {Ln,vcpu=vcpu_set,size=nK|M;}
example:
--ssram L2,vcpu=0,1,size=4K;L2,vcpu=2,3,size=1M;L3,vcpu=all,size=2M
2) define data structure and variable
to store the configuration data for later processing.
3) add new API to cleanup configuration data when VM shutdown.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move below logic out of init_vssram():
- get guest vCPU information
- vssram GPA space
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
virtual RTCT will be created on TCC driver interface, instead of
pass-through native RTCT to ACRN user VMs.
this patch removes dependency on native RTCT table:
- rename build_vrtct() function to init_ssram()
and minor changes inside.
- drop function create_and_inject_vrtct()
- add one API to get virtual RTCT table.
- rename variable 'pt_rtct' to 'ssram'
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Rename them to unify the coding style or for simplification
purpose, also remove redundant function declearations
in pci_core.h header file.
v4 update:
SSRAM* -> VSSRAM*
ssram* -> vssram*
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
guest ssram will be virtualized based on tcc driver interface,
instead of pass-thru native rtct, rename its source files to
avoid confusing:
- rename:
rtct.c -> vssram.c
rtct.h -> vssram.h
- move rtct.c from platform/acpci/ to platform/
- new directory 'vssram' to hold vssram source files.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The following parameters have not used by new design:
1. --vsbl <vsbl_file_path>
2. --part_info <part_info_name>
3. -G, --gvtargs <GVT_args>
4. -s <slot>,pci-gvt
5. -Y, --mptgen
6. -s <slot>,virtio-hdcp
7. -s <slot>,npk
8. -s <slot>,virtio-coreu
9. -i, --ioc_node <ioc_mediator_parameters>
10. --pm_by_vuart [pty|tty],<node_path>
11. --pm_notify_channel <channel>
This patch remove these parameters from usage and comment in code to
explain they are all obsoleted now.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Otherwise it will fail to set the GPU opregion/stolen_memory for guest VM in
course of GPU passthrough and the display can't work.
Tracked-On: #6988
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
fix memory leakage issue in function 'acrn_parse_cpu_affinity()',
memory pointed by 'cp' is not released before function return.
Tracked-On: #6919
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
this patch validates input of virtio_console_control_tx()
function to avoid potential progream crash with malicious
input from guest.
Tracked-On: #6851
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
If a file descriptor being monitored by epoll_wait is closed
in another thread, the result is unspecified. So add all mevents
removed in other threads to delete list. And drain the list in
the dispatch mevent thread.
Tracked-On: #6877
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch is to eliminate kernel error msgs:
'ACPI Error: AE_NOT_FOUND, Evaluating _PSS'
This is caused by missing of _PSS table in guest ACPI. It would
happen when pstate is not injected to the guest.
Kernel ACPI pstate driver first probes
_PPC(performance capabilites) and _PCT(performance control)
in ACPI. If they exist, then it loads the _PSS(performance state).
If _PPC/_PCT are presented while _PSS is missing, it prints
the error msg.
In acrn-dm, _PPC/_PCT are hard-coded to all vCPUs, while _PSS
are constructed with the pCPUs' pstate data. This is base on
assumption that all VMs can have pstate.
Now the pstate is given to VM only when the VM is not sharing
any CPU(and no RTVM is setup in the scenario).
When the VM doesn't have pstate, the hypercall will return px_cnt=0,
and the _PSS is not constructed. In this case, _PPC/PCT should not
be injected, too.
Tracked-On: #6848
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Since the UUID is not a *must* set parameter for the standard post-launched
VM which doesn't depend on any static VM configuration. We can remove
the KATA related code from hypervisor as it belongs to such VM type.
v2-->v3:
separate the struce acrn_platform_info change of devicemodel
v1-->v2:
update the subject and commit msg
Tracked-On:#6685
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The UUID has several usages before:
1, For HV to identify the static VM configuration of post-launched VM.
2, Seed virtualization.
3, Slightly prevent launching malicous VM from SOS as lack of secure
boot.
The UUID is confused to user, user don't understand what it is. And user
don't know where to get/apply the UUID. The worst experience is user
can't launch any VMs w/o re-compile the hv. Everything needs to be
static decided in building phase.
Now we decide to remove UUID and split each usage. For 1st usage, use
vmname as the identifier of static VM configuration. For 2nd one, we
will use --vseed as the new parameter. For 3rd one, will pretect by
SOS's dm-verity.
This patch will remove the UUID parameter and support 1st&3rd usages
from DM part. For 2nd usage, another patch will be submitted later.
Tracked-On: #6685
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix the Vulnerable coding style in xhci and pci core
Tracked-On: #6769
Signed-off-by: Liu Long <longliu@intel.com>
Reviewed-by: Huang, Yonghua <yonghua.huang@intel.com>
Address of software SRAM configured by TCC tool shall be
page-aligned. This patch fixup these addresses if they're
not page aligned.
Tracked-On: #6778
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix a potential overflow problem in get_more_acpi_dev_info where ch_read
might have a value greater than 32.
Tracked-On: #6769
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch enables TPM2 passthrough to post-launched VM with eventlog
support.
User starts by providing command line "--acpidev_pt <TPM2_HID>",
of which the <TPM2_HID> will be searched from /proc/iomem for TPM2 buffer
start address and size. Furthermore, If TPM2 eventlog is supported,
TPM2 eventlog information will be retrieved from sysfs TPM2 table and
passed-through as well.
v4 -> v5:
move tpm2 related logic from acpi.c to tpm.c
multiple API rename
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch refines the ACPI device passthrough framework by defining a
generic framework. Note that when user gives an HID by "--acpidev_pt
<HID>", the pt logic will go through all registered ops to see if
there's a match.
v4 -> v5:
parse_pt_acpidev/parse_pt_mmiodev -> create_pt_acpidev/create_pt_mmiodev
(there were already "init_xxx" function present, so rename to
create_xxx)
"super user" -> "superuser"
multiple API renames
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
'error' might be used uninitialized in cfginitbar. So initialize it to zero
at the beginning.
Tracked-On: #6284
Signed-off-by: Fei Li <fei1.li@intel.com>
Previously, when pass-thru IGD,
need to use the extra parameter "gpu",
it isn't friendly to user.
So remove the "gpu" paramater here.
Refine the logic for the judgment of IGD
check the following three conditions:
1. Physical BDF is 00:02.0
2. VGA class
3. vendor id is 0x8086
Then we can assume it's IGD.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru PCI dev,
get the class id from the physical pci config space,
then set the value in virtual config space class id.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru dev PIO bar,ensure it's identical mapping
(guest PIO bar start address equals to host PIO bar start address).
Then in HV side, set the corresponding VMCS io bitmap
to pass-thru these io ports for performance.
Tracked-On: #6508
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. refine the name of some functions and struct
2. add the support for PIO bar reservation
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When destroy the usb device release the resource allocate for transfer
in case cause the memory leak issue. Add the release and cancel
transfer request call back for the emulation device, use the emulation
device call back in xHCI controller emulation.
Tracked-On: #6533
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
detection of any error in 'probe_disk_log_file()'
calling 'pr_err()' will cause 'write_to_disk()' function
being called recursively infinitely, as pr_err will
call write_to_disk() and trap to probe_disk_log_file() again,
hence program will crash finally.
This patch fix above issue by using printf instead of pr_err,
as printf outputs to console directly.
Tracked-On: #6518
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix the bug introduced by 977da8f08. There had a typo that added
the "&" by mistake.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The event ring segment table pointer may be NULL when get the address
from guest, add pointer check before use it.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Function virtio_console_close_all will close all consoles, if the console->nports
value is 1, after the console be destroyed by the mevent teardown function, when
get the nports from the console, there will cause the NULL pointer. Fix the issue.
Tracked-On: #6431
Signed-off-by: Liu Long long.liu@intel.com
Reviewed-by: Jian Jun Chen jian.jun.chen@intel.com
Acked-by: Wang, Yu1 yu1.wang@intel.com
The address of OpRegion is not 4KB aligned,
if the OpRegion + extended VBT size is 16KB,
then it will take up to 5 physical pages in host.
So update the OpRegion size to 20KB
to expose the whole OpRegion to guest.
Tracked-On: #6270
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
"port->cb" in 'virtio_console_notify_tx()'
function maybe NULL when malicious inputs
are injected from virtio frondend in guest.
Tracked-On: #6388
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
1. add a name field to indicate what the MMIO Device is.
2. add two more MMIO resource to the acrn_mmiodev data structure.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
When a platform reboots or shuts down, the contents of RAM are not immediately
lost but begins to decay. During this period, there is a short timeframe during
which an attacker can turn the platform back on to boot into a program that
dumps the contents of memory (e.g., cold boot attacks). Encryption keys and
other secrets can be easily compromised through this method.
We already erasing the guest memory data when the guest is shut down normally.
However, if the guest is shut down abnormally, the contents of RAM may still
there. This patch mitigate this kind reset attack for a DM launched VM by
erasing the guest memory data by the guest has been created.
Tracked-On: #6061
Signed-off-by: Li Fei1 <fei1.li@intel.com>
User could use make targz-pkg command to generate tar package in
build directory,which could help user simplify the process
of installing acrn hypervisor in target board. user need to copy the
tarball package to target board,and extract it to "/" directory.
Tracked-On: #6355
Signed-off-by: liu hang1 <hang1.liu@intel.com>
Reviewed-by: VanCutsem, Geoffroy <geoffroy.vancutsem@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vm_config size can be calced by platform_info.sw.max_vms *
platform_info.sw.vm_config_size.
Change vm_get_config() to call IOCTL ACRN_IOCTL_GET_PLATFORM_INFO
twice, first to get platform_info, second to get the vm_configs
content.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Negative return value of vm_create_ioreq_client is invalid. 0 is valid.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The hypervisor creates vCPUs for a User VM in VM creation interface. The
vm_create_vcpu() interface is not needed anymore.
Remove vm_create_vcpu() from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Interface version is not recommended in Linux kernel community. Please
check Documentation/driver-api/ioctl.rst for reasons.
Remove the unused API version check from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The TPM driver will access some mmio registers using absolute address,
That means TPM base GPA must use same HPA value, when passthough it to VM
Tracked-On: #6126
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
CRB_REGS_CTRL_REQ is offset of control register to TPM mmio base,
need use the address to generate TPM2 acpi table
Tracked-On: #6126
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
With virtio polling mode enabled, a timer is running in the virtio
backend service. And the timer will also be triggered if its frondend
driver didn't do the device reset in shutdown. A freed virtio device
will be accessed in the polling timer handler.
Do the virtio reset() callback specifically to clear the polling timer
before the free.
Tracked-On: #6147
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Get and save native root port's max payload in dev cap register in
vrp_config data structure which will be used to configure vrp's max
payload by hv.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The trb pointer may be NULL when get the address from user space, add
the pointer check before use the trb.
Tracked-On: #6172
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
return value 'err' of mmio_rb_lookup() being 0 ensures
'entry' is not NULL, hence checking it before 'free(entry)'
is unnecessary.
Tracked-On: #6157
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The latest version of RTCT specification is version 2.
This patch is to add RTCT v2 support for virtual RTCT
of guest.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Emulation of guest lapic ID has been enhanced to
indicate the topology of vCPU hierarchy.
This patch refine logic to build virtual RCTC_v1 table
of guest to adapt above lapic ID changes.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
hv is responsible to ensure PTM is always enabled on hw root port if
that root port is PTM root-capable. If PTM root is not enabled already in physical
root port before guest launch, guest OS can only enable it in root port's virtual
config space and PTM may not function as desired so we would rather not
to allow user to enable PTM on pass-thru device in this case.
Also revisit a few comments to add assumption that acrn only support a
simple PTM hierarch emulation i.e., EP (ptm requestor) is directly connected
to root port (ptm root), or ptm requestor is rcie).
V4:
- Change behavior from V3: When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and pass thru the device
with no PTM support.
V3:
- When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and enable PTM in virtual
root port. This is not going to enable PTM on physical root port.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Only free rb_entry when we remove this entry from the rb tree, otherwise, a
page fault would trigger when next rb itreation would access the freed rb_entry.
Tracked-On: #6056
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- Change 64-bit MMIO BAR window to 256G-512G
The release is the same as 736a03222f.
This is just to update the changelog.
Tracked-On: #5913
Signed-off-by: Peter Fang <peter.fang@intel.com>
A user can use "--pm_notify_channel uart,allow_trigger_s5" to indicate
the User VM is allowed to trigger system S5.
"--pm_notify_channel uart" means a vuart channel will be created in the
User VM to allow communication with the VM's life_mngr. The Service VM
can then initiate S5 in the guest via its dm's monitor interface. The
additional option, "allow_trigger_s5", will create a socket connection
with the Service VM's life_mngr, allowing this VM to initiate system S5.
v1 -> v2:
- rename pm_notify_channel type to PWR_EVENT_NOTIFY_UART_TRIG_PLAT_S5
Tracked-On: #6034
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Make builds reproducible by honoring SOURCE_DATE_EPOCH and USER
environment variables in the respective Makefiles. Just follow the
recommendations at https://reproducible-builds.org/
Build tools (e.g. Debian packaging, Yocto) use this to ensure reproducibility
of packages.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Add one more sanity check: If the root port has more than
one child, we won't enable PTM on the guest.
This is not necessarily an error. We flag it as
error just because we don't have this type of hw
configuration at development time thus this configuration
is not tested.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If user sets enable_ptm option on passthru device, passthru device
calls ptm_probe() to check and enable ptm on passthru device. If error
is found during sanity check, ptm will not be enabled in the guest
and an error will be reported to user. However, this doesn't
prevent user from launching guest and passing through the device to the guest.
If no error is found, PTM is enabled in the guest and the
passthru device will connect to virtual root port (which acts as PTM
root) instead of virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add functionality to build and cache pci hierarchy, which are mainly
used to retrieve # of children of pci bridge or pci bus.
get_device_count_on_bus(): get # of child devices on a pci bus
get_device_count_on_bridge(): recursively get # of child devices on a pci bridge
scan_pci(): build and cache pci hierarchy
pci_find_root_port(): find root port of a pci device
clean_pci_cache(): free pci cache
scan_pci_test(): test of scan pci hierarchy (disabled)
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add a few pci utility functions to help easy access of pci
functionalities.
1. pci_find_capability(): find position of specified pci capability register
2. pci_find_ext_cap(): find extend capability register position from cap_id
3. pci_pcie_type(): find pci-e device type
4. is_root_port(): check whether pdev is a pci root port
5. is_bridge(): check whether pdev is a bridge
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Unify two functions definitions/declarifications:
Update the parameters from char array to char pointer.
to fix the build issue:
probeutils.c:61:29: error: argument 1 of type 'char *' declared
as a pointer [-Werror=array-parameter=]
Initialize local variable "c" to fix build issue:
core/mevent.c:122:21: error: 'c' may be used uninitialized
[-Werror=maybe-uninitialized]
Tracked-On: #5993
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
mmio_devs[0] is hard code for acpidev_pt, and mmio_devs[1] for
mmiodev_pt. Use mmio_dev_idx as index of mmio_devs[], to remove hard
code.
Remove hpa, gpa, size information from mmio_dev_ops, add acrn_mmiodev into
mmio_dev, to record hpa, gpa and size information for each passthough
mmio device.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The mmio devices use hard code GPA base, allocating GPA base resource
for them instead.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The ACPI MMIO devices, like TPM, has a fixed base GPA. Sould support
GPA resource allocating for MMIO devices. GPA region
0xF0000000~0xFE000000 is not used, can allocate GPA from it.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There is "void deinit_mmio_devs()" in ./devicemodel/hw/mmio/core.c,
but "int deinit_mmio_devs()" in ./devicemodel/include/mmio_dev.h
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This temporary release is based on the following commit:
commit 83b4731bab0423e3f9ffccfb37a882090be2f44a
Author: Tao Yuhong <yuhong.tao@intel.com>
Date: Wed Apr 14 07:43:11 2021 -0400
Change 64-bit MMIO BAR window to 256G-512G
DM maps 64-bit mmio BARs of vdev into 4G-5G, for post-launched VMs. At native
platform, 64-bit MMIO BARs which have 39-bit address, are always mapped into
256G-512G address space.
DM will change the address window of 64-bit vdev BARs of post-launched VMs to
256G-512G. That ask OVMF to do the same change, to boot from passthrough SATA/MVME
disks, which have 64-bit MMIO BAR.
Tracked-On: #5913
Signed-off-by: Peter Fang <peter.fang@intel.com>
ACRN didn't support dynamic memory allocation. SO it would reserve
a big page pool and use the GPA as index to get a page to do EPT
mapping. In order to save memory, we put high MMIO windows to [4G, 5G].
AFter we support dynamic page allocation for EPT mapping, we move
high MMIO windows to where it used to ([256G, 512G]) for 39 bits physical
address), we could move high memory to where is used to too ([4G, 4G +
size]).
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
DM maps 64-bit mmio BARs of vdev into 4G-5G, for post-launched VMs. At native
platform, 64-bit MMIO BARs which have 39-bit address, are always mapped into
256G-512G address space.
Change PCI_EMUL_MEMBASE64 to 256G, change PCI_EMUL_MEMLIMIT64 to 512G. So that
the 64-bit vdev BARs of post-launched VMs have same address space with native
platform.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
Enhance the 'misc/Makefile' to improve readability by grouping the
tools based on whether these are `services` or `debug_tools`
(following the folders they're in) and also create separate build
folders instead of putting *both* services and debug_tools in the
build/misc/debug_tools folder (default value).
Tracked-On: #5793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For clarity, we now prefer y|n over 0|1 as the values of boolean options on
make command lines. This patch applies this preference to the Makefile of
the device model and tools, while RELEASE=0|1 is still supported for
backward compatibility.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Update the 'acrn-dm' usage information. It is displayed when using
'-h' or when an argument parsing error occured but was not up-to-date
with the actual implementation.
Tracked-On: #5781
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Exit main() if pm_by_vuart_init() fails
- Use SIGHUP to gracefully power off a VM if pm_monitor_loop()
encounters a failure
- Identify a closed socket as a failure in pm_monitor_loop()
Tracked-On: #5736
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 6.1, "A device object must contain either an _HID object
or an _ADR object, but should not contain both."
Remove this object otherwise iasl would complain
"Warning 3073 - Multiple types ^ (Device object requires either a _HID
or _ADR, but not both)"
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
PCI spec said that BAR base should be naturally aligned. But on
ACRN if the bar size < PAGE_SIZE, BAR base should be aligned with
PAGE_SIZE. This is because the minimal size that EPT can map/unmap
is PAGE_SIZE.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix compilation issue when using gcc 10.x due to the "__packed"
attribute in acpi.h. Explicitly changing that to __attribute__((packed))
fixes the compilation error.
Tracked-On: #5671
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPA base of SW SRAM can't be hardcoded as physical address
of SW SRAM(HPA), as this HPA may vary on different platform.
This patch reserves a dedicated memory slot[GPA: 2G - 8M, 2G)
as SW SRAM region.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
Currently, OVMF sets CR4.MCE bit without
any hardware support checking, this will cause
User VM boot fails as MCE feature is not available
for ACRN guest VM.
This patch walk around this issue in OVMF.
Tracked-On: #5586
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
paddr_guest2host may return NULL, this patch checks the return value
to avoid null pointer dereference.
Tracked-On: #5514
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Prevent memory and information leaks by checking boundaries of
the incoming buffers from the hypervisor.
1. We check that the buffer is sufficent to hold a valid header.
2. We that each hbm message has valid size
vmei_hbm_handler() now returns -EINVAL if the size too small.
3. hdr->length < data_length.
Tracked-On: #5451
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Update and light clean-up of the buit-in list of arguments from 'acrn-dm'
* Added options in the top part (list with no explanation)
* Remove a couple of arguments that are no longer valid ('vmcfg' and 'dump')
Tracked-On: #5445
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In addition to a single OVMF image (OVMF.fd), split images
(OVMF_CODE.fd, OVMF_VARS.fd) can be used to facilitate VM management.
From the OVMF Whitepaper:
The variable store and the firmware executable are also available in
the build output as separate files entitled: "OVMF_VARS.fd" and
"OVMF_CODE.fd". This enables central management and updates of the
firmware executable, while each virtual machine can retain its own
variable store.
An example to launch acrn-dm with the split images:
--ovmf code=/usr/share/acrn/bios/OVMF_CODE.fd, \
vars=/usr/share/acrn/bios/OVMF_VARS.fd
v1 -> v2:
- use memory-mapped file I/O for writeback
- use fcntl to lock OVMF image files
Tracked-On: #5487
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
paddr_guest2host can return NULL, but code paths in virtio
are not checking the return value.
_vq_record() initializes iov_base pointer using paddr_guest2host()
but there is nothing in the flow that checks for NULL.
Chane _vq_record to return -1 in case the address translation
has failed.
Tracked-On: #5452
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: pSRAM: added a command line parameter "--psram" to enable pSRAM
support for post-launched RTVM
Added "--psram" in DM command line to enable pSRAM support for
post-launched RTVM
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: modify vE820 to adapt to pSRAM for post-launched RTVM
When pSRAM is enabled for post-launched RTVM, we add a segment in vE820 for
pSRAM, and therefore the lowmem RAM will be split into part1 and part2.
Also, code of post vE820 initialization is refined
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
If acrn-dm create pci vuart with
'-s,<slot>,uart,vuart_idx:<value>', then acrn-dm will not
create pci uart at DM land, but create an vuart-pci virtual device
at HV land.
When create a HV land vuart-pci vdev, user must specify its vuart id.
Which is defined in vm_config, is the acrn_vm_pci_dev_config.vuart_idx
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
- Explicitly reserve memory regions based on the input E820 map
- Revert "ovmf: reserve e820 table for PTCM"
Tracked-On: #5442
Signed-off-by: Peter Fang <peter.fang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
pm_vuart stops listening and relays the message right away if it
encounters EAGAIN during read(). This causes the messages relayed to be
fragmented.
Only relay the message when it encounters a null character or a newline
character, or when the buffer is full.
Tracked-On: #5429
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix typo error "--apicdev_pt HID" to pass through a TPM device. Fix it to
"--acpidev_pt HID"
Tracked-On: #5401
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
We can only call these callbacks when they are not NULL.
Tracked-On: #5342
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Yonghua Huang