move virtio-i2c doc from tutorials to developer-guilders/hld and add
entry for virtio-i2c in hld-virtio-devices
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
add VM state transition, and make this chapter into
part of hypervisor hld, the user level vm management
should be introduced in ACRN tools.
Tracked-On: #3882
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch makes the following changes:
- Remove the 4th VM
- Make the default vcpu num of RTVM as 2
---
v1 -> v2: Modify CONFIG_MAX_VM_NUM to 3U + KATA
Tracked-On: #3925
Signed-off-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
kick means to notify one thread_object. If the target thread object is
running, send a IPI to notify it; if the target thread object is
runnable, make reschedule on it.
Also add kick_vcpu API in vcpu layer to notify vcpu.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After moving softirq to following interrupt path, softirq handler might
break in the schedule spinlock context and try to grab the lock again,
then deadlock.
Disable interrupt with schedule spinlock context.
For the IRQ disable/restore operations:
CPU_INT_ALL_DISABLE(&rflag)
CPU_INT_ALL_RESTORE(rflag)
each takes 50~60 cycles.
renaming: get_schedule_lock -> obtain_schedule_lock
Tracked-On: #3813
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up do_swtich and do switch related things in schedule().
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To get pcpu_id from sched_control quickly and easier.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue that there is no error message displayed in launch setting of WebUI.
Tracked-On: #3913
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Usually We use '==' or '=' to compare strings under sh environment,
but '==' is not supported by dash which is the default sh environment
on Ubuntu, this leads efi build failure with current makefile.
Change the '==' to '=' to support both bash and dash.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Some BIOS does not support s3/s5, so there might be no _S3 or _S5
package in host ACPI table, previous code did not handle this, so
the build would be failed with the generated board file.
Set default s3/s5 package value to 0 for such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- The default behaviors of PIO & MMIO handlers are same
for all VMs, no need to expose dedicated APIs to register
default hanlders for SOS and prelaunched VM.
Tracked-On: #3904
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For cross-VM S5 notify via vUART, life_mngr service is running on UOS.
It is listening on COM2 to get SOS's commands.
The protocol is: SOS send "shutdown", UOS feedback "acked".
When SOS triggle shutdown, SOS can 1) check VM's status until UOS
stopped, 2) retry shutdown UOS normally with timeout.
So, no matter life_mngr server is running, SOS's shutdown procedure will
properly finish.
Tracked-On: #3564
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
'info.pmsi_addr' may be written to physicall device's
PCI configuration field without initialization when
'enable' is false in 'vmsi_remap()'.
this patch is to fix above issues, 'PCIR_MSI_ADDR'
and 'PCIR_MSI_ADDR_HIGH' only be programmed when
'enable' is true.
Tracked-On: #3903
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Refine the vbootloader type of vm,
The vbootloader type should be select from vsbl/ovmf/none in webUI item.
Tracked-On: #3879
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add the '--windows' option to launch WaaG vm.
Tracked-On: #3880
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently the parameter of init_ept_mem_ops is
'struct acrn_vm *vm' for this api,change it to
'struct memory_ops *mem_ops' and 'vm_id' to avoid
the reversed dependency, page.c is hardware layer and vm structure
is its upper-layer stuff.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Let init thread end with run_idle_thread(), then idle thread take over and
start to do scheduling.
Change enter_guest_mode() to init_guest_mode() as run_idle_thread() is removed
out of it. Also add run_thread() in schedule module to run
thread_object's thread loop directly.
rename: switch_to_idle -> run_idle_thread
Tracked-On: #3813
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sleep one thread_object means to prevent it from being scheduled.
wake one thread_object is an opposite operation of sleep.
This patch also add notify_mode in thread_object to indicate how to
deliver the request.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we have three valid status for thread_object:
THREAD_STS_RUNNING,
THREAD_STS_RUNNABLE,
THREAD_STS_BLOCKED.
This patch also provide several helpers to check the thread's status and
a status set wrapper function.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
schedule infrastructure is per pcpu, so move its initialization to each
pcpu's initialization.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support cpu sharing, multiple vcpu can run on same pcpu. We need do
necessary vcpu context switch. This patch add below actions in context
switch.
1) fxsave/fxrstor;
2) save/restore MSRs: MSR_IA32_STAR, MSR_IA32_LSTAR,
MSR_IA32_FMASK, MSR_IA32_KERNEL_GS_BASE;
3) switch vmcs.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu thread's stack shouldn't follow reset_vcpu to reset.
There is also a bug here:
while vcpu B thread set vcpu->running to false, other vcpu A thread
will treat the vcpu B is paused while it has not been switch out
completely, then reset_vcpu will reset the vcpu B thread's stack and
corrupt its running context.
This patch will remove the vcpu thread's stack reset from reset_vcpu.
With the change, we need do init_vmcs between vcpu startup address be
settled and scheduled in. And switch_to_idle() is not needed anymore
as S3 thread's stack will not be reset.
Tracked-On: #3813
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Two time related synthetic MSRs are implemented in this patch. Both of
them are partition wide MSR.
- HV_X64_MSR_TIME_REF_COUNT is read only and it is used to return the
partition's reference counter value in 100ns units.
- HV_X64_MSR_REFERENCE_TSC is used to set/get the reference TSC page,
a sequence number, an offset and a multiplier are defined in this
page by hypervisor and guest OS can use them to calculate the
normalized reference time since partition creation, in 100ns units.
Tracked-On: #3831
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The vm name for Preempt-RT Linux is not defined in launch script,
causing Preempt RT linux launch failed.
This patch refine the vm name and define the vm name for Preempt-RT
Linux to fix such kinds of issues.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Gao Junhao