OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/gpio
History
Daniel Leung e4734e088a gpio: intel_apl: don't enable interrupt if line is output 
Hardware does not seem to support triggering interrupts to
itself by setting line as both input/output and setting
output to desired level. So just say interrupt triggering
is not supported when line is set to output.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
 		2020-05-16 19:56:19 +02:00
..
CMakeLists.txt gpio: add driver for MCP23S17 GPIO chip 2020-04-17 05:56:05 -05:00
Kconfig gpio: add driver for MCP23S17 GPIO chip 2020-04-17 05:56:05 -05:00
Kconfig.cc13xx_cc26xx drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.cc32xx drivers: cc32xx: use DT_INST_FOREACH to reduce code duplication 2020-04-26 06:05:10 -05:00
Kconfig.cmsdk_ahb drivers: gpio: cmsdk_ahb: Convert driver to be full DTS based 2020-04-03 04:11:36 -05:00
Kconfig.dw drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.esp32 drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.gecko drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.ht16k33 kconfig: Replace non-defconfig single-symbol 'if's with 'depends on' 2020-02-12 10:32:34 -06:00
Kconfig.imx drivers: gpio: gpio_imx: Convert driver to new DT_INST macros 2020-04-04 09:34:00 -05:00
Kconfig.intel drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.litex drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.lmp90xxx kconfig: Replace non-defconfig single-symbol 'if's with 'depends on' 2020-02-12 10:32:34 -06:00
Kconfig.mcp23s17 gpio: add driver for MCP23S17 GPIO chip 2020-04-17 05:56:05 -05:00
Kconfig.mcux gpio: mcux: Convert convert to DT_INST defines 2020-04-23 17:07:41 -05:00
Kconfig.mcux_igpio drivers: gpio: mcux_igpio: Convert driver to new DT_INST macros 2020-04-20 11:08:46 -05:00
Kconfig.mcux_lpc drivers: gpio: mcux_lpc: Remove unused Kconfig symbols 2020-04-17 10:16:40 -05:00
Kconfig.mmio32 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.nrfx drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.pca95xx kconfig: Replace non-defconfig single-symbol 'if's with 'depends on' 2020-02-12 10:32:34 -06:00
Kconfig.rv32m1 drivers: gpio: rv32m1: Convert driver to new DT_INST macros 2020-04-10 14:38:04 -05:00
Kconfig.sam drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.sam0 drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.sifive drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.stellaris drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.stm32 drivers: gpio: cleanup select HAS_DTS_GPIO 2020-04-04 09:27:12 -05:00
Kconfig.sx1509b gpio: gpio_sx1509b: add support for interrupt functionality 2020-04-20 18:51:59 +02:00
Kconfig.xec drivers: gpio: mchp_xec: Convert to using new device tree macros 2020-04-28 07:43:31 -05:00
gpio_cc13xx_cc26xx.c drivers: gpio: use new ngpios macros 2020-04-06 09:14:02 -05:00
gpio_cc32xx.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_cmsdk_ahb.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_cmsdk_ahb.h cleanup: include/: move gpio.h to drivers/gpio.h 2019-06-27 22:55:49 -04:00
gpio_dw.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_dw.h drivers: gpio_dw: add support for pin validation 2020-02-05 12:00:36 +01:00
gpio_dw_registers.h drivers: gpio_dw: update to use new GPIO API 2020-02-05 12:00:36 +01:00
gpio_esp32.c drivers: gpio: use new ngpios macros for cases embedded in macros 2020-04-06 09:14:02 -05:00
gpio_gecko.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_handlers.c drivers: gpio: fix syscall handlers 2020-03-07 09:22:50 +02:00
gpio_ht16k33.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_imx.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_intel_apl.c gpio: intel_apl: don't enable interrupt if line is output 2020-05-16 19:56:19 +02:00
gpio_litex.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_lmp90xxx.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_mchp_xec.c gpio: mchp_xec: fix erroneous interrupt triggers 2020-05-14 10:48:26 +02:00
gpio_mcp23s17.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_mcp23s17.h gpio: add driver for MCP23S17 GPIO chip 2020-04-17 05:56:05 -05:00
gpio_mcux.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_mcux_igpio.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_mcux_lpc.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_mmio32.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_nrfx.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_pca95xx.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_rv32m1.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_sam.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_sam0.c devicetree: remove DT_HAS_NODE_STATUS_OKAY 2020-05-13 18:24:42 +02:00
gpio_shell.c gpio: replace GPIO_DIR flags 2020-02-05 12:00:36 +01:00
gpio_sifive.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_stellaris.c devicetree: allow access to all nodes 2020-05-08 19:37:18 -05:00
gpio_stm32.c devicetree: remove DT_HAS_NODE_STATUS_OKAY 2020-05-13 18:24:42 +02:00
gpio_stm32.h driver/gpio: stm32: Add STM32L5 support 2020-05-08 00:34:34 -05:00
gpio_sx1509b.c device: Fix structure attributes access 2020-05-08 23:07:44 +02:00
gpio_utils.h gpio_utils.h: add helpers for dt node -> port pin mask 2020-04-06 09:14:02 -05:00