zephyr/drivers/sensor/max17262/max17262.h

97 lines
2.3 KiB
C

/*
* Copyright 2021 Matija Tudan
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_DRIVERS_SENSOR_BATTERY_MAX17262_H_
#define ZEPHYR_DRIVERS_SENSOR_BATTERY_MAX17262_H_
#define VOLTAGE_MULTIPLIER_UV 1250 / 16
#define CURRENT_MULTIPLIER_NA 156250
#define TIME_MULTIPLIER_MS 5625
/* Register addresses */
enum {
STATUS = 0x00,
REP_CAP = 0x05,
REP_SOC = 0x06,
INT_TEMP = 0x08,
VCELL = 0x09,
AVG_CURRENT = 0x0b,
FULL_CAP_REP = 0x10,
TTE = 0x11,
CYCLES = 0x17,
DESIGN_CAP = 0x18,
ICHG_TERM = 0x1E,
TTF = 0x20,
VEMPTY = 0x3A,
FSTAT = 0x3D,
COULOMB_COUNTER = 0x4D,
SOFT_WAKEUP = 0x60,
HIBCFG = 0xBA,
MODELCFG = 0xDB,
};
/* Masks */
enum {
FSTAT_DNR = 0x01,
STATUS_POR = 0x02,
MODELCFG_REFRESH = 0x8000,
};
/* MAX17262 specific channels */
enum max17262_channel {
MAX17262_COULOMB_COUNTER,
};
struct max17262_data {
/* Current cell voltage in units of 1.25/16mV */
uint16_t voltage;
/* Average current in units of 156.25uA */
int16_t avg_current;
/* Desired charging current in mA */
uint16_t ichg_term;
/* Remaining capacity as a %age */
uint16_t state_of_charge;
/* Internal temperature in units of 1/256 degrees C */
int16_t internal_temp;
/* Full charge capacity in mAh */
uint16_t full_cap;
/* Remaining capacity in mAh */
uint16_t remaining_cap;
/* Time to empty in seconds */
uint16_t time_to_empty;
/* Time to full in seconds */
uint16_t time_to_full;
/* Cycle count in 1/100ths (number of charge/discharge cycles) */
uint16_t cycle_count;
/* Battery capacity in mAh */
uint16_t design_cap;
/* Spent capacity in mAh */
uint16_t coulomb_counter;
};
struct max17262_config {
const struct device *i2c;
uint16_t i2c_addr;
/* Value of Rsense resistor in milliohms (typicallly 5 or 10) */
uint16_t rsense_mohms;
/* Design voltage of cell in mV */
uint16_t design_voltage;
/* Desired voltage of cell in mV */
uint16_t desired_voltage;
/* Desired charging current in mA */
uint16_t desired_charging_current;
/* Battery capacity in mAh */
uint16_t design_cap;
/* Empty voltage detection in mV */
uint16_t empty_voltage;
/* Recovery voltage detection in mV */
uint16_t recovery_voltage;
/* Defined charge voltage value in mV */
uint16_t charge_voltage;
};
#endif