Johann Fischer de974efebb drivers: eth_enc424j600: explicitly disable INTIE after reset ... After system reset (SETETHRST) interrupt enable register (EIE) has the default value 0x8010 and global interrupt enable flag (INTIE) is set. This is not desired and the INTIE flag should be set only at the end of the initialization. Disable INTIE flag and set desired interrupts sources in a single write command just right after system reset. Resolves: #35091 Reported-by: Jamie McCrae <jamie.mccrae@lairdconnect.com> Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>		2021-05-21 07:35:19 -04:00
..
adc	ite: drivers/adc: it8xxx2: fix adc driver flow	2021-05-13 11:54:05 -04:00
audio	drivers/audio: Kconfig: Fix dmic INIT_PRIORITY default value	2021-05-04 08:33:46 -05:00
bluetooth	drivers: bluetooth: hci: increase spi_rx_stack	2021-05-13 22:07:45 -04:00
cache	cache: Introduce external cache controller system support	2021-05-08 07:00:33 +02:00
can	drivers: can: Implement stm32fd driver	2021-05-07 12:36:10 -05:00
clock_control	driver: clock: npcx: Add valid clock checking	2021-05-07 20:52:55 -04:00
console	drivers: uart_mux: Fix compilation after logging changes	2021-05-17 10:57:53 -04:00
counter	counter: callback null check to use NULL instead of numeric zero	2021-04-29 07:16:37 -04:00
crypto	…
dac	drivers: dac: mcp4725: remove usage of device_pm_control_nop	2021-05-13 22:04:14 -04:00
debug	…
disk	…
display	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
dma	drivers: dma: stm32 dmamux has request 0 for mem-to-mem	2021-05-21 04:55:02 -05:00
ec_host_cmd_periph	…
edac	…
eeprom	…
entropy	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
espi	…
ethernet	drivers: eth_enc424j600: explicitly disable INTIE after reset	2021-05-21 07:35:19 -04:00
flash	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
gpio	gpio: intel: fix reg address for Apollo Lake	2021-05-18 20:45:55 -04:00
hwinfo	…
i2c	ite: drivers/i2c: it8xxx2: fix slave address from 7-bit to 8-bit	2021-05-13 11:52:53 -04:00
i2s	drivers: i2s: i2s_sam_ssc: Fix build issue	2021-05-05 13:01:01 -05:00
ieee802154	drivers: ieee802154: Udpate nRF IEEE 802.15.4 radio driver	2021-05-06 08:46:47 -05:00
interrupt_controller	intc: ioapic: mark data and functions as boot/pinned	2021-05-10 16:00:43 -05:00
ipm	ipm: cavs: (cosmetic) fix indentation	2021-05-07 12:44:34 -04:00
kscan	…
led	drivers: led_pwm: Update pm_control function	2021-05-19 07:52:02 -05:00
led_strip	…
lora	…
memc	drivers: memc: Update driver to support XIP on mimxrt685_evk.	2021-05-07 15:44:19 -05:00
misc	…
modem	drivers: modem: hl7800: +KSRAT dependent on firmware version	2021-05-19 08:09:37 -05:00
net	…
neural_net	…
pcie	…
peci	…
pinmux	drivers/pinmux: stm32: Enable PM_DEVICE_RUNTIME services	2021-05-06 14:31:13 -04:00
pm_cpu_ops	…
ps2	…
ptp_clock	…
pwm	pm: device: Align state names with system states	2021-05-07 18:35:12 -04:00
regulator	…
sensor	drivers/sensor: iis2iclx: (FIX) enable interrupt selectively	2021-05-20 17:55:08 -04:00
serial	drivers: serial: nrf_uarte: Fix uart_callback_set unsupported handling	2021-05-21 04:53:19 -05:00
spi	drivers/spi: STM32: This solves SPI infinite loop on Tranceive	2021-05-11 13:01:57 -05:00
timer	drivers: systick: fix cycle count in sys_clock_set_timeout()	2021-05-20 08:44:55 -05:00
usb	drivers: usb_dc_nrfx: add attached event delay	2021-04-29 09:55:28 -04:00
video	…
virtualization	…
watchdog	…
wifi	drivers: wifi: esp: stop using pkt->work in TX path	2021-05-07 13:10:01 +02:00
CMakeLists.txt	cache: Introduce external cache controller system support	2021-05-08 07:00:33 +02:00
Kconfig	cache: Introduce external cache controller system support	2021-05-08 07:00:33 +02:00