192 lines
5.2 KiB
C
192 lines
5.2 KiB
C
/* ST Microelectronics LSM6DSO 6-axis IMU sensor driver
|
|
*
|
|
* Copyright (c) 2019 STMicroelectronics
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Datasheet:
|
|
* https://www.st.com/resource/en/datasheet/lsm6dso.pdf
|
|
*/
|
|
|
|
#ifndef ZEPHYR_DRIVERS_SENSOR_LSM6DSO_LSM6DSO_H_
|
|
#define ZEPHYR_DRIVERS_SENSOR_LSM6DSO_LSM6DSO_H_
|
|
|
|
#include <drivers/sensor.h>
|
|
#include <zephyr/types.h>
|
|
#include <drivers/gpio.h>
|
|
#include <drivers/spi.h>
|
|
#include <sys/util.h>
|
|
#include <stmemsc.h>
|
|
#include "lsm6dso_reg.h"
|
|
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
#include <drivers/spi.h>
|
|
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */
|
|
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
|
|
#include <drivers/i2c.h>
|
|
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c) */
|
|
|
|
union axis3bit16_t {
|
|
int16_t i16bit[3];
|
|
uint8_t u8bit[6];
|
|
};
|
|
|
|
union axis1bit16_t {
|
|
int16_t i16bit;
|
|
uint8_t u8bit[2];
|
|
};
|
|
|
|
#define LSM6DSO_EN_BIT 0x01
|
|
#define LSM6DSO_DIS_BIT 0x00
|
|
|
|
/* Accel sensor sensitivity grain is 61 ug/LSB */
|
|
#define GAIN_UNIT_XL (61LL)
|
|
|
|
/* Gyro sensor sensitivity grain is 4.375 udps/LSB */
|
|
#define GAIN_UNIT_G (4375LL)
|
|
|
|
#define SENSOR_PI_DOUBLE (SENSOR_PI / 1000000.0)
|
|
#define SENSOR_DEG2RAD_DOUBLE (SENSOR_PI_DOUBLE / 180)
|
|
#define SENSOR_G_DOUBLE (SENSOR_G / 1000000.0)
|
|
|
|
#if CONFIG_LSM6DSO_ACCEL_FS == 0
|
|
#define LSM6DSO_ACCEL_FS_RUNTIME 1
|
|
#define LSM6DSO_DEFAULT_ACCEL_FULLSCALE 0
|
|
#define LSM6DSO_DEFAULT_ACCEL_SENSITIVITY GAIN_UNIT_XL
|
|
#elif CONFIG_LSM6DSO_ACCEL_FS == 2
|
|
#define LSM6DSO_DEFAULT_ACCEL_FULLSCALE 0
|
|
#define LSM6DSO_DEFAULT_ACCEL_SENSITIVITY GAIN_UNIT_XL
|
|
#elif CONFIG_LSM6DSO_ACCEL_FS == 4
|
|
#define LSM6DSO_DEFAULT_ACCEL_FULLSCALE 2
|
|
#define LSM6DSO_DEFAULT_ACCEL_SENSITIVITY (2.0 * GAIN_UNIT_XL)
|
|
#elif CONFIG_LSM6DSO_ACCEL_FS == 8
|
|
#define LSM6DSO_DEFAULT_ACCEL_FULLSCALE 3
|
|
#define LSM6DSO_DEFAULT_ACCEL_SENSITIVITY (4.0 * GAIN_UNIT_XL)
|
|
#elif CONFIG_LSM6DSO_ACCEL_FS == 16
|
|
#define LSM6DSO_DEFAULT_ACCEL_FULLSCALE 1
|
|
#define LSM6DSO_DEFAULT_ACCEL_SENSITIVITY (8.0 * GAIN_UNIT_XL)
|
|
#endif
|
|
|
|
#if (CONFIG_LSM6DSO_ACCEL_ODR == 0)
|
|
#define LSM6DSO_ACCEL_ODR_RUNTIME 1
|
|
#endif
|
|
|
|
#define GYRO_FULLSCALE_125 4
|
|
|
|
#if CONFIG_LSM6DSO_GYRO_FS == 0
|
|
#define LSM6DSO_GYRO_FS_RUNTIME 1
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 4
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY GAIN_UNIT_G
|
|
#elif CONFIG_LSM6DSO_GYRO_FS == 125
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 4
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY GAIN_UNIT_G
|
|
#elif CONFIG_LSM6DSO_GYRO_FS == 250
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 0
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY (2.0 * GAIN_UNIT_G)
|
|
#elif CONFIG_LSM6DSO_GYRO_FS == 500
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 1
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY (4.0 * GAIN_UNIT_G)
|
|
#elif CONFIG_LSM6DSO_GYRO_FS == 1000
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 2
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY (8.0 * GAIN_UNIT_G)
|
|
#elif CONFIG_LSM6DSO_GYRO_FS == 2000
|
|
#define LSM6DSO_DEFAULT_GYRO_FULLSCALE 3
|
|
#define LSM6DSO_DEFAULT_GYRO_SENSITIVITY (16.0 * GAIN_UNIT_G)
|
|
#endif
|
|
|
|
|
|
#if (CONFIG_LSM6DSO_GYRO_ODR == 0)
|
|
#define LSM6DSO_GYRO_ODR_RUNTIME 1
|
|
#endif
|
|
|
|
struct lsm6dso_config {
|
|
stmdev_ctx_t ctx;
|
|
union {
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
|
|
const struct stmemsc_cfg_i2c i2c;
|
|
#endif
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
const struct stmemsc_cfg_spi spi;
|
|
#endif
|
|
} stmemsc_cfg;
|
|
#ifdef CONFIG_LSM6DSO_TRIGGER
|
|
const struct gpio_dt_spec gpio_drdy;
|
|
uint8_t int_pin;
|
|
bool trig_enabled;
|
|
#endif /* CONFIG_LSM6DSO_TRIGGER */
|
|
};
|
|
|
|
union samples {
|
|
uint8_t raw[6];
|
|
struct {
|
|
int16_t axis[3];
|
|
};
|
|
} __aligned(2);
|
|
|
|
#define LSM6DSO_SHUB_MAX_NUM_SLVS 2
|
|
|
|
struct lsm6dso_data {
|
|
const struct device *dev;
|
|
int16_t acc[3];
|
|
uint32_t acc_gain;
|
|
int16_t gyro[3];
|
|
uint32_t gyro_gain;
|
|
#if defined(CONFIG_LSM6DSO_ENABLE_TEMP)
|
|
int temp_sample;
|
|
#endif
|
|
#if defined(CONFIG_LSM6DSO_SENSORHUB)
|
|
uint8_t ext_data[2][6];
|
|
uint16_t magn_gain;
|
|
|
|
struct hts221_data {
|
|
int16_t x0;
|
|
int16_t x1;
|
|
int16_t y0;
|
|
int16_t y1;
|
|
} hts221;
|
|
bool shub_inited;
|
|
uint8_t num_ext_dev;
|
|
uint8_t shub_ext[LSM6DSO_SHUB_MAX_NUM_SLVS];
|
|
#endif /* CONFIG_LSM6DSO_SENSORHUB */
|
|
|
|
uint16_t accel_freq;
|
|
uint8_t accel_fs;
|
|
uint16_t gyro_freq;
|
|
uint8_t gyro_fs;
|
|
|
|
#ifdef CONFIG_LSM6DSO_TRIGGER
|
|
struct gpio_callback gpio_cb;
|
|
sensor_trigger_handler_t handler_drdy_acc;
|
|
sensor_trigger_handler_t handler_drdy_gyr;
|
|
sensor_trigger_handler_t handler_drdy_temp;
|
|
|
|
#if defined(CONFIG_LSM6DSO_TRIGGER_OWN_THREAD)
|
|
K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_LSM6DSO_THREAD_STACK_SIZE);
|
|
struct k_thread thread;
|
|
struct k_sem gpio_sem;
|
|
#elif defined(CONFIG_LSM6DSO_TRIGGER_GLOBAL_THREAD)
|
|
struct k_work work;
|
|
#endif
|
|
#endif /* CONFIG_LSM6DSO_TRIGGER */
|
|
};
|
|
|
|
#if defined(CONFIG_LSM6DSO_SENSORHUB)
|
|
int lsm6dso_shub_init(const struct device *dev);
|
|
int lsm6dso_shub_fetch_external_devs(const struct device *dev);
|
|
int lsm6dso_shub_get_idx(const struct device *dev, enum sensor_channel type);
|
|
int lsm6dso_shub_config(const struct device *dev, enum sensor_channel chan,
|
|
enum sensor_attribute attr,
|
|
const struct sensor_value *val);
|
|
#endif /* CONFIG_LSM6DSO_SENSORHUB */
|
|
|
|
#ifdef CONFIG_LSM6DSO_TRIGGER
|
|
int lsm6dso_trigger_set(const struct device *dev,
|
|
const struct sensor_trigger *trig,
|
|
sensor_trigger_handler_t handler);
|
|
|
|
int lsm6dso_init_interrupt(const struct device *dev);
|
|
#endif
|
|
|
|
#endif /* ZEPHYR_DRIVERS_SENSOR_LSM6DSO_LSM6DSO_H_ */
|