247 lines
6.1 KiB
C
247 lines
6.1 KiB
C
/*
|
|
* Copyright (c) 2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <soc.h>
|
|
#include <fsl_i2c.h>
|
|
#include <fsl_clock.h>
|
|
#include <misc/util.h>
|
|
|
|
#define DEV_CFG(dev) \
|
|
((const struct i2c_ksdk_config * const)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct i2c_ksdk_data * const)(dev)->driver_data)
|
|
#define DEV_BASE(dev) \
|
|
((I2C_Type *)(DEV_CFG(dev))->base)
|
|
|
|
struct i2c_ksdk_config {
|
|
I2C_Type *base;
|
|
clock_name_t clock_source;
|
|
void (*irq_config_func)(struct device *dev);
|
|
union dev_config default_cfg;
|
|
};
|
|
|
|
struct i2c_ksdk_data {
|
|
i2c_master_handle_t handle;
|
|
device_sync_call_t sync;
|
|
status_t callback_status;
|
|
};
|
|
|
|
static int i2c_ksdk_configure(struct device *dev, uint32_t dev_config_raw)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
const struct i2c_ksdk_config *config = DEV_CFG(dev);
|
|
union dev_config dev_config = (union dev_config)dev_config_raw;
|
|
uint32_t clock_freq;
|
|
uint32_t baudrate;
|
|
|
|
if (!dev_config.bits.is_master_device) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev_config.bits.is_slave_read) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev_config.bits.use_10_bit_addr) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (dev_config.bits.speed) {
|
|
case I2C_SPEED_STANDARD:
|
|
baudrate = KHZ(100);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
baudrate = MHZ(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
clock_freq = CLOCK_GetFreq(config->clock_source);
|
|
I2C_MasterSetBaudRate(base, baudrate, clock_freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_ksdk_master_transfer_callback(I2C_Type *base,
|
|
i2c_master_handle_t *handle, status_t status, void *userData)
|
|
{
|
|
struct device *dev = userData;
|
|
struct i2c_ksdk_data *data = DEV_DATA(dev);
|
|
|
|
data->callback_status = status;
|
|
device_sync_call_complete(&data->sync);
|
|
}
|
|
|
|
static uint32_t i2c_ksdk_convert_flags(int msg_flags)
|
|
{
|
|
uint32_t flags = 0;
|
|
|
|
if (!(msg_flags & I2C_MSG_STOP)) {
|
|
flags |= kI2C_TransferNoStopFlag;
|
|
}
|
|
|
|
if (msg_flags & I2C_MSG_RESTART) {
|
|
flags |= kI2C_TransferRepeatedStartFlag;
|
|
}
|
|
|
|
return flags;
|
|
}
|
|
|
|
static int i2c_ksdk_transfer(struct device *dev, struct i2c_msg *msgs,
|
|
uint8_t num_msgs, uint16_t addr)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
struct i2c_ksdk_data *data = DEV_DATA(dev);
|
|
i2c_master_transfer_t transfer;
|
|
status_t status;
|
|
|
|
/* Iterate over all the messages */
|
|
for (int i = 0; i < num_msgs; i++) {
|
|
|
|
/* Initialize the transfer descriptor */
|
|
transfer.flags = i2c_ksdk_convert_flags(msgs->flags);
|
|
transfer.slaveAddress = addr;
|
|
transfer.direction = (msgs->flags & I2C_MSG_READ)
|
|
? kI2C_Read : kI2C_Write;
|
|
transfer.subaddress = 0;
|
|
transfer.subaddressSize = 0;
|
|
transfer.data = msgs->buf;
|
|
transfer.dataSize = msgs->len;
|
|
|
|
/* Start the transfer */
|
|
status = I2C_MasterTransferNonBlocking(base,
|
|
&data->handle, &transfer);
|
|
|
|
/* Return an error if the transfer didn't start successfully
|
|
* e.g., if the bus was busy
|
|
*/
|
|
if (status != kStatus_Success) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* Wait for the transfer to complete */
|
|
device_sync_call_wait(&data->sync);
|
|
|
|
/* Return an error if the transfer didn't complete
|
|
* successfully. e.g., nak, timeout, lost arbitration
|
|
*/
|
|
if (data->callback_status != kStatus_Success) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* Move to the next message */
|
|
msgs++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_ksdk_isr(void *arg)
|
|
{
|
|
struct device *dev = (struct device *)arg;
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
struct i2c_ksdk_data *data = DEV_DATA(dev);
|
|
|
|
I2C_MasterTransferHandleIRQ(base, &data->handle);
|
|
}
|
|
|
|
static int i2c_ksdk_init(struct device *dev)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
const struct i2c_ksdk_config *config = DEV_CFG(dev);
|
|
struct i2c_ksdk_data *data = DEV_DATA(dev);
|
|
uint32_t clock_freq;
|
|
i2c_master_config_t master_config;
|
|
int error;
|
|
|
|
device_sync_call_init(&data->sync);
|
|
|
|
clock_freq = CLOCK_GetFreq(config->clock_source);
|
|
I2C_MasterGetDefaultConfig(&master_config);
|
|
I2C_MasterInit(base, &master_config, clock_freq);
|
|
I2C_MasterTransferCreateHandle(base, &data->handle,
|
|
i2c_ksdk_master_transfer_callback, dev);
|
|
|
|
error = i2c_ksdk_configure(dev, config->default_cfg.raw);
|
|
if (error) {
|
|
return error;
|
|
}
|
|
|
|
config->irq_config_func(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_driver_api i2c_ksdk_driver_api = {
|
|
.configure = i2c_ksdk_configure,
|
|
.transfer = i2c_ksdk_transfer,
|
|
};
|
|
|
|
#ifdef CONFIG_I2C_0
|
|
static void i2c_ksdk_config_func_0(struct device *dev);
|
|
|
|
static const struct i2c_ksdk_config i2c_ksdk_config_0 = {
|
|
.base = I2C0,
|
|
.clock_source = I2C0_CLK_SRC,
|
|
.irq_config_func = i2c_ksdk_config_func_0,
|
|
.default_cfg.raw = CONFIG_I2C_0_DEFAULT_CFG,
|
|
};
|
|
|
|
static struct i2c_ksdk_data i2c_ksdk_data_0;
|
|
|
|
DEVICE_AND_API_INIT(i2c_ksdk_0, CONFIG_I2C_0_NAME, &i2c_ksdk_init,
|
|
&i2c_ksdk_data_0, &i2c_ksdk_config_0,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_ksdk_driver_api);
|
|
|
|
static void i2c_ksdk_config_func_0(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_I2C0, CONFIG_I2C_0_IRQ_PRI,
|
|
i2c_ksdk_isr, DEVICE_GET(i2c_ksdk_0), 0);
|
|
|
|
irq_enable(I2C0_IRQn);
|
|
}
|
|
#endif /* CONFIG_I2C_0 */
|
|
|
|
#ifdef CONFIG_I2C_1
|
|
static void i2c_ksdk_config_func_1(struct device *dev);
|
|
|
|
static const struct i2c_ksdk_config i2c_ksdk_config_1 = {
|
|
.base = I2C1,
|
|
.clock_source = I2C1_CLK_SRC,
|
|
.irq_config_func = i2c_ksdk_config_func_1,
|
|
.default_cfg.raw = CONFIG_I2C_1_DEFAULT_CFG,
|
|
};
|
|
|
|
static struct i2c_ksdk_data i2c_ksdk_data_1;
|
|
|
|
DEVICE_AND_API_INIT(i2c_ksdk_1, CONFIG_I2C_1_NAME, &i2c_ksdk_init,
|
|
&i2c_ksdk_data_1, &i2c_ksdk_config_1,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_ksdk_driver_api);
|
|
|
|
static void i2c_ksdk_config_func_1(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_I2C1, CONFIG_I2C_1_IRQ_PRI,
|
|
i2c_ksdk_isr, DEVICE_GET(i2c_ksdk_1), 0);
|
|
|
|
irq_enable(I2C1_IRQn);
|
|
}
|
|
#endif /* CONFIG_I2C_1 */
|