71 lines
1.7 KiB
YAML
71 lines
1.7 KiB
YAML
# Copyright (c) 2021, Linaro ltd
|
||
# SPDX-License-Identifier: Apache-2.0
|
||
|
||
description: |
|
||
PLL node binding for STM32H7 devices
|
||
|
||
It can be used to describe 3 different PLLs: PLL1 (Main PLL), PLL2 and PLL3.
|
||
Only PLL1 and PLL3 are supported for now.
|
||
|
||
These PLLs could take one of clk_hse, clk_hsi or clk_csi as input clock, with
|
||
an input frequency from 1 to 16 MHz. PLLM factor is used to set the input
|
||
clock in this acceptable range.
|
||
|
||
Each PLL can have up to 3 output clocks and for each output clock, the
|
||
frequency can be computed with the following formulae:
|
||
|
||
f(PLL_Px) = f(VCOx clock) / PLLPx -> pllx_p_ck ((pll1_p_ck : sys_ck))
|
||
f(PLL_Qx) = f(VCOx clock) / PLLQx -> pllx_q_ck
|
||
f(PLL_Rx) = f(VCOx clock) / PLLRx -> pllx_r_ck
|
||
|
||
with f(VCOx clock) = f(REFx_CK) × (PLLNx / PLLMx)
|
||
|
||
The PLL output frequency must not exceed 80 MHz.
|
||
|
||
compatible: "st,stm32h7-pll-clock"
|
||
|
||
include: [clock-controller.yaml, base.yaml]
|
||
|
||
properties:
|
||
"#clock-cells":
|
||
const: 0
|
||
|
||
clocks:
|
||
required: true
|
||
|
||
div-m:
|
||
type: int
|
||
required: true
|
||
description: |
|
||
Division factor for PLLx
|
||
input clock
|
||
Valid range: 0 - 63
|
||
|
||
mul-n:
|
||
type: int
|
||
required: true
|
||
description: |
|
||
Main PLL multiplication factor for VCOx
|
||
Valid range: 4 - 512
|
||
|
||
div-p:
|
||
type: int
|
||
required: false
|
||
description: |
|
||
PLL division factor for pllx_p_ck
|
||
Valid range: 1 - 128
|
||
|
||
div-q:
|
||
type: int
|
||
required: false
|
||
description: |
|
||
PLL division factor for pllx_q_ck
|
||
Valid range: 1 - 128
|
||
|
||
div-r:
|
||
type: int
|
||
required: false
|
||
description: |
|
||
PLL division factor for pllx_r_ck
|
||
Valid range: 1 - 128
|