40 lines
1.1 KiB
ReStructuredText
40 lines
1.1 KiB
ReStructuredText
TH02: Temperature and Humidity Monitor
|
|
######################################
|
|
|
|
Overview
|
|
********
|
|
This sample periodically reads temperature and humidity from the Grove
|
|
Temperature & Humidity Sensor (TH02) and display the results on the Grove LCD
|
|
display.
|
|
|
|
|
|
Requirements
|
|
************
|
|
|
|
This sample uses the TH02 sensor and the grove LCD display. Both devices are
|
|
controlled using the I2C interface.
|
|
|
|
More details about the sensor and the display can be found here:
|
|
|
|
- `Grove Tempture And Humidity`_
|
|
- `Grove LCD Module`_
|
|
|
|
Wiring
|
|
******
|
|
|
|
The easiest way to get this wired is to use the Grove shield and connect both
|
|
devices to I2C. No additional wiring is required. Depending on the board you are
|
|
using you might need to connect two 10K ohm resistors to SDL and and SDA (I2C).
|
|
The LCD display requires 5 volts, so the volatage switch on the shield needs to
|
|
be on 5v.
|
|
|
|
|
|
References
|
|
**********
|
|
|
|
- TH02: http://www.datasheetspdf.com/mobile/748107/TH02.html
|
|
|
|
|
|
.. _Grove LCD Module: http://wiki.seeed.cc/Grove-LCD_RGB_Backlight/
|
|
.. _Grove Tempture And Humidity: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/
|