zephyr

History

David B. Kinder 2cb045420c doc: fix .rst files canonical heading order The headings on some .rst files were not following the expected heading order of using # for h1, * for h2, = for h3, and - for h4 This patch fixes that, and the doc/templates/*.tmpl files created for folks to use as templates for creating board and sample docs. Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9 Signed-off-by: David B. Kinder <david.b.kinder@intel.com>		2017-01-20 16:06:36 -08:00
..
src	license: Replace Apache boilerplate with SPDX tag	2017-01-19 03:50:58 +00:00
Makefile	samples: tests: remove obsolete KERNEL_TYPE and kernel variables	2016-11-04 15:47:25 -04:00
README.rst	doc: fix .rst files canonical heading order	2017-01-20 16:06:36 -08:00
prj.conf	sensors: th02: convert to and build with unified kernel	2016-11-03 01:45:50 +00:00
testcase.ini	samples: tests: remove obsolete KERNEL_TYPE and kernel variables	2016-11-04 15:47:25 -04:00

README.rst

TH02: Temperature and Humidity Monitor
######################################

Overview
********
This sample periodically reads temperature and humidity from the Grove
Temperature & Humidity Sensor (TH02) and display the results on the Grove LCD
display.


Requirements
************

This sample uses the TH02 sensor and the grove LCD display. Both devices are
controlled using the I2C interface.

More details about the sensor and the display can be found here:

- `Grove Tempture And Humidity`_
- `Grove LCD Module`_

Wiring
******

The easiest way to get this wired is to use the Grove shield and connect both
devices to I2C. No additional wiring is required. Depending on the board you are
using you might need to connect two 10K ohm resistors to SDL and and SDA (I2C).
The LCD display requires 5 volts, so the volatage switch on the shield needs to
be on 5v.


References
**********

 - TH02: http://www.datasheetspdf.com/mobile/748107/TH02.html


.. _Grove LCD Module: http://wiki.seeed.cc/Grove-LCD_RGB_Backlight/
.. _Grove Tempture And Humidity: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/