201 lines
4.6 KiB
C
201 lines
4.6 KiB
C
/*
|
|
* Copyright (c) 2016 Intel Corporation
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#include <device.h>
|
|
#include <i2c.h>
|
|
#include <sensor.h>
|
|
#include <misc/__assert.h>
|
|
|
|
#include "sensor_max44009.h"
|
|
|
|
static int max44009_reg_read(struct max44009_data *drv_data, uint8_t reg,
|
|
uint8_t *val, bool send_stop)
|
|
{
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.buf = ®,
|
|
.len = 1,
|
|
.flags = I2C_MSG_WRITE,
|
|
},
|
|
{
|
|
.buf = val,
|
|
.len = 1,
|
|
.flags = I2C_MSG_READ,
|
|
},
|
|
};
|
|
|
|
if (send_stop) {
|
|
msgs[1].flags |= I2C_MSG_STOP;
|
|
}
|
|
|
|
if (i2c_transfer(drv_data->i2c, msgs, 2, MAX44009_I2C_ADDRESS) != 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max44009_reg_write(struct max44009_data *drv_data, uint8_t reg,
|
|
uint8_t val)
|
|
{
|
|
uint8_t tx_buf[2] = {reg, val};
|
|
|
|
return i2c_write(drv_data->i2c, tx_buf, sizeof(tx_buf),
|
|
MAX44009_I2C_ADDRESS);
|
|
}
|
|
|
|
static int max44009_reg_update(struct max44009_data *drv_data, uint8_t reg,
|
|
uint8_t mask, uint8_t val)
|
|
{
|
|
uint8_t old_val = 0;
|
|
uint8_t new_val = 0;
|
|
|
|
if (max44009_reg_read(drv_data, reg, &old_val, true) != 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
new_val = old_val & ~mask;
|
|
new_val |= val & mask;
|
|
|
|
return max44009_reg_write(drv_data, reg, new_val);
|
|
}
|
|
|
|
static int max44009_attr_set(struct device *dev, enum sensor_channel chan,
|
|
enum sensor_attribute attr,
|
|
const struct sensor_value *val)
|
|
{
|
|
struct max44009_data *drv_data = dev->driver_data;
|
|
uint8_t value;
|
|
uint32_t cr;
|
|
|
|
if (chan != SENSOR_CHAN_LIGHT) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
switch (attr) {
|
|
case SENSOR_ATTR_SAMPLING_FREQUENCY:
|
|
if (val->type != SENSOR_VALUE_TYPE_INT_PLUS_MICRO) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* convert rate to mHz */
|
|
cr = val->val1 * 1000 + val->val2 / 1000;
|
|
|
|
/* the sensor supports 1.25Hz or continuous conversion */
|
|
switch (cr) {
|
|
case 1250:
|
|
value = 0;
|
|
break;
|
|
default:
|
|
value = MAX44009_CONTINUOUS_SAMPLING;
|
|
}
|
|
|
|
if (max44009_reg_update(drv_data, MAX44009_REG_CONFIG,
|
|
MAX44009_SAMPLING_CONTROL_BIT,
|
|
value) != 0) {
|
|
SYS_LOG_DBG("Failed to set attribute!");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max44009_sample_fetch(struct device *dev, enum sensor_channel chan)
|
|
{
|
|
struct max44009_data *drv_data = dev->driver_data;
|
|
uint8_t val_h, val_l;
|
|
|
|
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL || chan == SENSOR_CHAN_LIGHT);
|
|
|
|
drv_data->sample = 0;
|
|
|
|
if (max44009_reg_read(drv_data, MAX44009_REG_LUX_HIGH_BYTE, &val_h,
|
|
false) != 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
if (max44009_reg_read(drv_data, MAX44009_REG_LUX_LOW_BYTE, &val_l,
|
|
true) != 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
drv_data->sample = ((uint16_t)val_h) << 8;
|
|
drv_data->sample += val_l;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max44009_channel_get(struct device *dev, enum sensor_channel chan,
|
|
struct sensor_value *val)
|
|
{
|
|
struct max44009_data *drv_data = dev->driver_data;
|
|
uint32_t uval;
|
|
|
|
if (chan != SENSOR_CHAN_LIGHT) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/**
|
|
* sample consists of 4 bits of exponent and 8 bits of mantissa
|
|
* bits 15 to 12 are exponent bits
|
|
* bits 11 to 8 and 3 to 0 are the mantissa bits
|
|
*/
|
|
uval = drv_data->sample;
|
|
uval = (uval & MAX44009_MANTISSA_LOW_NIBBLE_MASK) +
|
|
((uval & MAX44009_MANTISSA_HIGH_NIBBLE_MASK) >> 4);
|
|
uval = uval << (drv_data->sample >> MAX44009_SAMPLE_EXPONENT_SHIFT);
|
|
|
|
val->type = SENSOR_VALUE_TYPE_DOUBLE;
|
|
/* lux is the integer of sample output multiplied by 0.045. */
|
|
val->dval = ((double)uval) * 0.045;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sensor_driver_api max44009_driver_api = {
|
|
.attr_set = max44009_attr_set,
|
|
.sample_fetch = max44009_sample_fetch,
|
|
.channel_get = max44009_channel_get,
|
|
};
|
|
|
|
int max44009_init(struct device *dev)
|
|
{
|
|
struct max44009_data *drv_data = dev->driver_data;
|
|
|
|
drv_data->i2c = device_get_binding(CONFIG_MAX44009_I2C_DEV_NAME);
|
|
if (drv_data->i2c == NULL) {
|
|
SYS_LOG_DBG("Failed to get pointer to %s device!",
|
|
CONFIG_MAX44009_I2C_DEV_NAME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev->driver_api = &max44009_driver_api;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct max44009_data max44009_drv_data;
|
|
|
|
DEVICE_INIT(max44009, CONFIG_MAX44009_DRV_NAME, max44009_init,
|
|
&max44009_drv_data, NULL, SECONDARY,
|
|
CONFIG_SENSOR_INIT_PRIORITY);
|