zephyr/arch/x86/soc/quark_x1000/Kconfig.defconfig

302 lines
4.7 KiB
Plaintext

# Kconfig - Quark X1000 SoC configuration options
#
# Copyright (c) 2014-2015 Wind River Systems, Inc.
# Copyright (c) 2015-2016 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
if SOC_QUARK_X1000
config SOC
default quark_x1000
config PHYS_LOAD_ADDR
default 0x00100000
config PHYS_RAM_ADDR
default 0x00400000
config RAM_SIZE
default 32768
config ROM_SIZE
default 1024 if XIP
config SYS_CLOCK_HW_CYCLES_PER_SEC
default 25000000 if HPET_TIMER
config CLFLUSH_DETECT
def_bool y if CACHE_FLUSHING
if SHARED_IRQ
config SHARED_IRQ_0
def_bool y
if SHARED_IRQ_0
config SHARED_IRQ_0_NAME
default "SHARED_IRQ0"
config SHARED_IRQ_0_IRQ
default 18
config SHARED_IRQ_0_PRI
default 2
endif # SHARED_IRQ_0
endif # SHARED_IRQ
if PCI_LEGACY_BRIDGE
config PCI_LEGACY_BRIDGE_BUS
default 0
config PCI_LEGACY_BRIDGE_DEV
default 31
config PCI_LEGACY_BRIDGE_VENDOR_ID
default 0x8086
config PCI_LEGACY_BRIDGE_DEVICE_ID
default 0x095e
endif # PCI_LEGACY_BRIDGE
if I2C
config I2C_CLOCK_SPEED
default 25
config I2C_DW
def_bool y
if I2C_DW
config I2C_DW_0
def_bool y
if I2C_DW_0
config I2C_DW_0_NAME
default "I2C_0"
config I2C_DW_0_DEFAULT_CFG
default 0x12
config I2C_DW_0_IRQ_PRI
default 2
config I2C_DW_0_IRQ_SHARED_NAME
default SHARED_IRQ_0_NAME if SHARED_IRQ
endif # I2C_DW_0
endif # I2C_DW
endif # I2C
if GPIO
config GPIO_SCH
def_bool y
if GPIO_SCH
config GPIO_SCH_0
def_bool y
config GPIO_SCH_1
def_bool y
if GPIO_SCH_0
config GPIO_SCH_0_DEV_NAME
default "GPIO_CW"
endif # GPIO_SCH_0
if GPIO_SCH_1
config GPIO_SCH_1_DEV_NAME
default "GPIO_RW"
endif # GPIO_SCH_1
endif # GPIO_SCH
config GPIO_DW
def_bool y
if GPIO_DW
config GPIO_DW_0
def_bool y
select GPIO_DW_0_IRQ_SHARED if SHARED_IRQ
if GPIO_DW_0
config GPIO_DW_0_NAME
default "GPIO_0"
config GPIO_DW_0_PRI
default 2
config GPIO_DW_0_IRQ_SHARED_NAME
default SHARED_IRQ_0_NAME if SHARED_IRQ
endif # GPIO_DW_0
endif # GPIO_DW
endif # GPIO
if SPI
config SPI_INTEL
def_bool y
if SPI_INTEL
config SPI_INTEL_CS_GPIO
def_bool y
config SPI_INTEL_PORT_0
def_bool y
if SPI_INTEL_PORT_0
config SPI_INTEL_PORT_0_DRV_NAME
default "SPI0"
config SPI_INTEL_PORT_0_BUS
default 0
config SPI_INTEL_PORT_0_DEV
default 21
config SPI_INTEL_PORT_0_FUNCTION
default 0
config SPI_INTEL_PORT_0_REGS
default 0x90009000
config SPI_INTEL_PORT_0_IRQ
default 16
config SPI_INTEL_PORT_0_PRI
default 2
config SPI_INTEL_PORT_0_CS_GPIO_PORT
default GPIO_DW_0_NAME
config SPI_INTEL_PORT_0_CS_GPIO_PIN
default 0
endif # SPI_INTEL_PORT_0
config SPI_INTEL_PORT_1
def_bool n
if SPI_INTEL_PORT_1
config SPI_INTEL_PORT_1_DRV_NAME
default "SPI1"
config SPI_INTEL_PORT_1_BUS
default 0
config SPI_INTEL_PORT_1_DEV
default 21
config SPI_INTEL_PORT_1_FUNCTION
default 1
config SPI_INTEL_PORT_1_REGS
default 0x90008000
config SPI_INTEL_PORT_1_IRQ
default 17
config SPI_INTEL_PORT_1_PRI
default 2
config SPI_INTEL_PORT_1_CS_GPIO_PORT
default GPIO_DW_0_NAME
config SPI_INTEL_PORT_1_CS_GPIO_PIN
default 2
endif # SPI_INTEL_PORT_1
endif # SPI_INTEL
endif # SPI
if UART_NS16550
config UART_NS16550_PCI
def_bool y if PCI
config UART_NS16550_PORT_0
def_bool y
if UART_NS16550_PORT_0
config UART_NS16550_PORT_0_NAME
default "UART_0"
config UART_NS16550_PORT_0_IRQ_PRI
default 0
config UART_NS16550_PORT_0_BAUD_RATE
default 115200
config UART_NS16550_PORT_0_OPTIONS
default 0
config UART_NS16550_PORT_0_PCI
def_bool y if UART_NS16550_PCI
endif # UART_NS16550_PORT_0
config UART_NS16550_PORT_1
def_bool y if PCI
if UART_NS16550_PORT_1
config UART_NS16550_PORT_1_NAME
default "UART_1"
config UART_NS16550_PORT_1_IRQ_PRI
default 3
config UART_NS16550_PORT_1_BAUD_RATE
default 115200
config UART_NS16550_PORT_1_OPTIONS
default 0
config UART_NS16550_PORT_1_PCI
def_bool y if UART_NS16550_PCI
endif # UART_NS16550_PORT_1
endif # UART_NS16550
if ETH_DW
config ETH_DW_0
def_bool y
if ETH_DW_0
config ETH_DW_0_IRQ_SHARED_NAME
default SHARED_IRQ_0_NAME if SHARED_IRQ
endif # ETH_DW_0
endif # ETH_DW
# Pin multiplexer uses PCAL9535A, needs to be initialized after it
config PINMUX_INIT_PRIORITY
default 80 if PINMUX
if UART_CONSOLE
config UART_CONSOLE_ON_DEV_NAME
default "UART_1"
endif
if BLUETOOTH_UART
config BLUETOOTH_UART_ON_DEV_NAME
default "UART_1"
endif
endif # SOC_QUARK_X1000