Johann Fischer 92a00ee39b drivers: uart_altera_jtag_hal: use DEVICE_DT_INST_DEFINE() ... The conversion to devicetree seems to be half lost for this driver. There are already bindings and nodes for compatible "altr,jtag-uart", update driver to use it. Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME. Resolves #37207 Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>		2021-08-23 18:53:47 -04:00
..
CMakeLists.txt	Microchip: MEC172x: Add UART driver	2021-08-09 16:21:33 -04:00
Kconfig	Microchip: MEC172x: Add UART driver	2021-08-09 16:21:33 -04:00
Kconfig.altera_jtag	drivers: uart_altera_jtag_hal: use DEVICE_DT_INST_DEFINE()	2021-08-23 18:53:47 -04:00
Kconfig.apbuart	…
Kconfig.b91	drivers: serial: introduce new Telink B91 Serial driver	2021-07-21 05:37:12 -04:00
Kconfig.cc13xx_cc26xx	…
Kconfig.cc32xx	…
Kconfig.cmsdk_apb	…
Kconfig.esp32	…
Kconfig.esp32c3_rom	drivers: serial: added minimal uart driver for esp32c3	2021-08-03 11:20:06 -05:00
Kconfig.esp32s2_rom	esp32s2: drivers: serial: add minimal uart driver	2021-08-09 13:03:14 -04:00
Kconfig.gecko	…
Kconfig.imx	…
Kconfig.leuart_gecko	…
Kconfig.litex	…
Kconfig.lpc11u6x	…
Kconfig.mcux	…
Kconfig.mcux_flexcomm	…
Kconfig.mcux_iuart	…
Kconfig.mcux_lpsci	…
Kconfig.mcux_lpuart	…
Kconfig.miv	drivers: serial: uart_miv: Fix build errors	2021-05-10 13:15:50 -05:00
Kconfig.msp432p4xx	…
Kconfig.native_posix	…
Kconfig.npcx	…
Kconfig.nrfx	drivers: serial: nrf_uarte: Conditionally call PPI driver	2021-05-07 12:11:32 +02:00
Kconfig.ns16550	…
Kconfig.numicro	driver: serial: replace suffix nuvoton with numicro	2021-08-07 20:37:24 -04:00
Kconfig.pl011	…
Kconfig.psoc6	…
Kconfig.rcar	drivers: uart: Add "Interrupt driven" to R-Car	2021-07-13 09:42:22 -04:00
Kconfig.rtt	tracing: fix conflict with RTT locking	2021-05-25 07:36:38 -05:00
Kconfig.rv32m1_lpuart	…
Kconfig.sam0	…
Kconfig.sifive	…
Kconfig.stellaris	…
Kconfig.stm32	drivers: dma: stm32 dma driver for a new dma version	2021-07-22 04:52:53 -04:00
Kconfig.test	drivers: serial: add a dummy driver for vnd,serial	2021-07-14 11:10:08 -05:00
Kconfig.uart_sam	…
Kconfig.usart_sam	…
Kconfig.xec	Microchip: MEC172x: Add UART driver	2021-08-09 16:21:33 -04:00
Kconfig.xlnx	…
Kconfig.xmc4xxx	…
leuart_gecko.c	…
serial_test.c	drivers: serial: add a dummy driver for vnd,serial	2021-07-14 11:10:08 -05:00
uart_altera_jtag_hal.c	drivers: uart_altera_jtag_hal: use DEVICE_DT_INST_DEFINE()	2021-08-23 18:53:47 -04:00
uart_apbuart.c	serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE	2021-06-07 12:09:01 +02:00
uart_b91.c	drivers: serial: b91: full duplex mode support	2021-08-20 06:23:24 -04:00
uart_cc13xx_cc26xx.c	pm: use actions for device PM control	2021-08-04 08:23:01 -04:00
uart_cc32xx.c	…
uart_cmsdk_apb.c	…
uart_esp32.c	esp32: drivers: interrupt_controller: review UART interrupt usage	2021-07-16 07:19:28 -04:00
uart_gecko.c	…
uart_handlers.c	…
uart_imx.c	…
uart_liteuart.c	…
uart_lpc11u6x.c	serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE	2021-06-07 12:09:01 +02:00
uart_lpc11u6x.h	…
uart_mchp_xec.c	Microchip: MEC172x: Add UART driver	2021-08-09 16:21:33 -04:00
uart_mcux.c	serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE	2021-06-07 12:09:01 +02:00
uart_mcux_flexcomm.c	driver/uart: add enum parity element on devicetree bindings	2021-06-11 08:53:10 -05:00
uart_mcux_iuart.c	…
uart_mcux_lpsci.c	…
uart_mcux_lpuart.c	drivers: serial: NXP: Enable flow control for uart_mcux_lpuart	2021-08-12 14:49:09 -05:00
uart_miv.c	drivers: serial: uart_miv: Fix build errors	2021-05-10 13:15:50 -05:00
uart_msp432p4xx.c	…
uart_native_posix.c	drivers: Fix missing `auto_attach_cmd`	2021-06-09 16:18:17 +02:00
uart_npcx.c	pm: use actions for device PM control	2021-08-04 08:23:01 -04:00
uart_nrfx_uart.c	drivers: serial: nrf: Make pull-ups on UART pins configurable	2021-08-06 19:17:26 -04:00
uart_nrfx_uarte.c	drivers: serial: nrf: Make pull-ups on UART pins configurable	2021-08-06 19:17:26 -04:00
uart_ns16550.c	drivers/pcie: Improve and fix MBAR retrieval depending on use cases	2021-08-20 06:30:20 -04:00
uart_ns16550.h	…
uart_numicro.c	driver: serial: replace suffix nuvoton with numicro	2021-08-07 20:37:24 -04:00
uart_pl011.c	…
uart_psoc6.c	…
uart_rcar.c	drivers: uart: Add "Interrupt driven" to R-Car	2021-07-13 09:42:22 -04:00
uart_rom_esp32c3.c	drivers: serial: added minimal uart driver for esp32c3	2021-08-03 11:20:06 -05:00
uart_rom_esp32s2.c	esp32s2: drivers: serial: add minimal uart driver	2021-08-09 13:03:14 -04:00
uart_rtt.c	…
uart_rv32m1_lpuart.c	…
uart_sam.c	soc: atmel_sam: Add _INST to ATMEL_SAM_DT_PIN* macros	2021-06-14 09:50:41 -05:00
uart_sam0.c	drivers: serial: uart_sam0: Add pinctrl support	2021-07-30 14:37:20 -05:00
uart_sifive.c	…
uart_stellaris.c	…
uart_stm32.c	drivers: serial: stm32 uart defines dma slot with macro	2021-08-16 19:35:36 +02:00
uart_stm32.h	pm: device: remove usage of local states	2021-08-04 08:23:01 -04:00
uart_xlnx_ps.c	serial: introduce CONFIG_UART_USE_RUNTIME_CONFIGURE	2021-06-07 12:09:01 +02:00
uart_xlnx_uartlite.c	…
uart_xmc4xxx.c	…
usart_sam.c	soc: atmel_sam: Add _INST to ATMEL_SAM_DT_PIN* macros	2021-06-14 09:50:41 -05:00