Carson Green f698fd525e drivers: dma: stm32: only clear busy flag when transfer is complete ... The STM32 DMA driver can provide interrupts for transfers not yet complete. However, the current implementation will clear the busy flag for all interrupts when CONFIG_DMAMUX_STM32 is not enabled. The previous fix for when CONFIG_DMAMUX_STM32 is enabled should also apply when not enabled. Also if CONFIG_DMAMUX_STM32 is enabled busy flag will not be cleared when error interrupts occur. With this change, the busy flag is only cleared when completion interrupts in non-cyclic mode or error interrupts occur. These are the cases where transfer will not continue. Signed-off-by: Carson Green <cgreen@tuta.com>		2024-09-24 14:24:28 -05:00
..
CMakeLists.txt	drivers: dma: Add initial SiM3U1xx support	2024-09-10 12:38:36 -04:00
Kconfig	drivers: dma: Add initial SiM3U1xx support	2024-09-10 12:38:36 -04:00
Kconfig.andes_atcdmac300	…
Kconfig.dma_pl330	…
Kconfig.dw	…
Kconfig.dw_axi_dmac	…
Kconfig.dw_common	…
Kconfig.emul	…
Kconfig.esp32	…
Kconfig.gd32	…
Kconfig.intel_adsp_gpdma	…
Kconfig.intel_adsp_hda	drivers: dma: intel_adsp_hda: change L1 exit defaults	2024-09-02 09:09:07 +02:00
Kconfig.intel_lpss	…
Kconfig.iproc_pax	…
Kconfig.max32	…
Kconfig.mcux_edma	…
Kconfig.mcux_lpc	…
Kconfig.mcux_pxp	…
Kconfig.mcux_smartdma	…
Kconfig.nios2_msgdma	…
Kconfig.nxp_edma	…
Kconfig.nxp_sof_host_dma	…
Kconfig.rpi_pico	…
Kconfig.sam0	…
Kconfig.sam_xdmac	…
Kconfig.sedi	…
Kconfig.si32	drivers: dma: Add initial SiM3U1xx support	2024-09-10 12:38:36 -04:00
Kconfig.smartbond	…
Kconfig.stm32	…
Kconfig.xec	…
Kconfig.xmc4xxx	…
dma_andes_atcdmac300.c	…
dma_dw.c	…
dma_dw_axi.c	…
dma_dw_common.c	style: drivers: comply with MISRA C:2012 Rule 15.6	2024-08-20 10:33:51 +02:00
dma_dw_common.h	…
dma_emul.c	…
dma_esp32_gdma.c	espressif: clean up unused code	2024-09-09 13:55:39 -04:00
dma_gd32.c	…
dma_handlers.c	…
dma_intel_adsp_gpdma.c	style: drivers: comply with MISRA C:2012 Rule 15.6	2024-09-11 07:40:35 -04:00
dma_intel_adsp_hda.c	soc: intel: renamed soc from ace30_ptl to ace30	2024-09-24 10:10:37 +02:00
dma_intel_adsp_hda.h	…
dma_intel_adsp_hda_host_in.c	…
dma_intel_adsp_hda_host_out.c	…
dma_intel_adsp_hda_link_in.c	…
dma_intel_adsp_hda_link_out.c	…
dma_intel_lpss.c	…
dma_iproc_pax.h	…
dma_iproc_pax_v1.c	style: drivers: comply with MISRA C:2012 Rule 15.6	2024-09-11 07:40:35 -04:00
dma_iproc_pax_v1.h	…
dma_iproc_pax_v2.c	style: drivers: comply with MISRA C:2012 Rule 15.6	2024-09-11 07:40:35 -04:00
dma_iproc_pax_v2.h	…
dma_max32.c	…
dma_mchp_xec.c	…
dma_mcux_edma.c	…
dma_mcux_edma.h	…
dma_mcux_lpc.c	…
dma_mcux_pxp.c	…
dma_mcux_smartdma.c	…
dma_nios2_msgdma.c	…
dma_nxp_edma.c	…
dma_nxp_edma.h	drivers: dma: dma_nxp_edma: support 64-bit TCD	2024-09-19 18:02:42 -04:00
dma_nxp_sof_host_dma.c	drivers: dma: dma_nxp_sof_host_dma: do cache WB after HOST_TO_MEMORY copy	2024-08-26 17:06:20 +02:00
dma_pl330.c	…
dma_pl330.h	…
dma_rpi_pico.c	…
dma_sam0.c	…
dma_sam_xdmac.c	…
dma_sam_xdmac.h	…
dma_sedi.c	…
dma_si32.c	drivers: dma: Add initial SiM3U1xx support	2024-09-10 12:38:36 -04:00
dma_smartbond.c	…
dma_stm32.c	drivers: dma: stm32: only clear busy flag when transfer is complete	2024-09-24 14:24:28 -05:00
dma_stm32.h	…
dma_stm32_bdma.c	drivers: dma: stm32: only clear busy flag when transfer is complete	2024-09-24 14:24:28 -05:00
dma_stm32_bdma.h	drivers: dma: stm32: only clear busy flag when transfer is complete	2024-09-24 14:24:28 -05:00
dma_stm32_v1.c	…
dma_stm32_v2.c	…
dma_stm32u5.c	drivers: dma: stm32: only clear busy flag when transfer is complete	2024-09-24 14:24:28 -05:00
dma_xmc4xxx.c	drivers: dma_xmc4xxx: Clear request before callback when overrun happens	2024-09-04 19:09:49 -04:00
dmamux_stm32.c	…