Add the write_unprotect command to the stm32 qspi flash driver
to un protect flash before any write operation to the external quad-NOR
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the support of the requires_ulbpr property when a Microchip
quad-spi flash is mounted.
Set the CONFIG_USE_MICROCHIP_QSPI_FLASH_WITH_STM32=y flag to access
the command
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the <requires-ulbpr> property from the "jedec,spi-nor-common.yaml"
to the existing st,stm32-qspi-nor.yaml. So that external quad-NOR with
unlock the Global Block Protection (BPR) (opcode 0x98) is accepted.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Generating sections via DT memory attributes did not work for the
platform as only the memory region was created so far.
This change adds the DT_LINKER_SECTION() macro to the linker script so
that the appropriate sections will be generated, too.
Fixes#79085
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Updated overlay files to test using nocache.
and run outside of usersapce mode to avoid
inaccessible memory regions when using nocache on RT parts.
Also updated testcase file to reflect nocache testing.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
- A lot of zephyr networking samples (zperf, http_server, etc) will
complain if both 2.4g and subg ieee802154 are enabled simultaneously.
- This leads to a lot of new people getting confused with the network code
not working without any clear errors.
- As we already set the alias `zephyr,ieee802154 = &ieee802154g`, I think
it would be best to enable only subg by default.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Checks blobs presence as dependency to allow driver build.
Goal is to avoid building in environment where blobs won't
be present (e.g GitHub CI environment).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Both #78823 and #78807 merged at around the same time. This made it so
the shell didn't compile when #78823 was stacked on top as it did not run
with the test build. This fixes the compile issues.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The User LED for the mimxrt1060_evkb is inverted from the
mimxrt1060_evk, this commit updates the ACTIVE_STATE to be
HIGH rather than LOW.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Fixes:
/__w/zephyr/zephyr/include/zephyr/drivers/stepper.h:429:16: error:
'direction' may be used uninitialized [-Werror=maybe-uninitialized]
found with:
west build -p -b esp32s3_touch_lcd_1_28/esp32s3/appcpu -T
tests/drivers/stepper/shell/drivers.stepper.shell
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The previous code used casts of address of int to float pointer.
This is undefined behavior in C and may cause a compiler to
optimize code incorrectly.
I have replaced it with a union of int and float types,
eliminating the cast problem.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
Increasing the number of max tx segments to be able to fit composition
page 0 into composition data status message.
After the subnet bridge config client and server are added to the
tester, the size needed to report composition data page 0 increased.
Current behaviour of the tester is correct, dropping the element when
there is not enough space in data field, however the PTS application
does not handle the composition data status message without element.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Fixes: #79052
The yaml CMake tests overwrites `message()` in order to verify correct
error handling. This was original done in a function and then using
a return call when an expected error has been raised.
Using a function() means the `return()` only returns the `message()`
and thus wrongly continue processing rest of the yaml file.
Change `message()` to macro so the return call correctly returns from
the calling yaml functions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The dispatcher table needs to be large enough to have support
for all file descriptor values.
Fixes#79042
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This region is only required if certain fast peripherals make use of such
region for DMAing. It was now enabled on all builds, often resulting in:
```
[134/134] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 24372 B 248 KB 9.60%
RAM: 4448 B 256 KB 1.70%
DMA_RAM21: 0 GB 16 KB 0.00% <~~ Not used!
DMA_RAM3x_APP: 40 B 4 KB 0.98%
IDT_LIST: 0 GB 32 KB 0.00%
```
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Move FIELD_* macros from zephyr/sys/util.h to zephyr/sys/util_macro.h,
as zephyr/sys/util.h cannot be used from device tree.
Device tree uses zephyr/dt-bindings/dt-util.h, which includes
zephyr/sys/util_macro.h.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Update glob patterns to include files using "silabs" naming
in addition to "gecko".
Also include the oddly named BT HCI driver.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
- Driver always initializes the device in the suspended state
- If CONFIG_PM_DEVICE_RUNTIME=n, device PM callback will be called with
RESUME action, thus setting up pins to default state and enabling the
peripheral
NOTE: when CONFIG_PM_DEVICE=n, the pinctrl sleep state will not be
available (-ENOENT) and so never applied, thus avoiding a pin
suspended->active transition.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some devices, e.g. SoC level devices like I2C peripheral, can never be
powerd off as they are always energized. Such devices can only go from an
active state or to a low power state (suspended). Allow them to simply
return -ENOTSUP when called with TURN_ON (or TURN_OFF).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Francois Ramu