Commit Graph

14857 Commits

Author SHA1 Message Date
Punit Vara fe882f407d tests: Remove camel case and fix coding style
Test whichever had Camel case defined for functions and variables have
been replaced.

Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
  side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
  enclosed in a do - while loop
- do not use C99 // comments

JIRA: ZEP-2249

Signed-off-by: Punit Vara <punit.vara@intel.com>
2017-06-29 07:00:50 -04:00
Vinayak Kariappa Chettimada ed85dea358 Bluetooth: shell: Fix compile warnings when CONFIG_DEBUG=y
Fixed uninitialised auto variables, that had caused compile
errors under CONFIG_DEBUG=y.

Jira: Zep-2334

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-06-29 07:43:54 +03:00
Anas Nashif e8776f6b69 doc: add qemu_xtensa board instructions
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 16:58:37 -04:00
Anas Nashif 50e95046b2 doc: update qemu_cortex_m3 instructions
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 16:58:37 -04:00
Anas Nashif f9f2bd9d83 doc: update qemu_x86 instructions
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 16:58:37 -04:00
Johann Fischer 08df5961b3 arch: intel_quark: use DW device driver when USB is selected
This patch allows more generic USB configuration in the samples
and removes platform dependent driver configuration.

Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-06-28 15:14:15 -04:00
Anas Nashif b3ae274a62 tests: fix PCI test using 'supported' keyword
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 09:51:40 -05:00
Anas Nashif d1e562c924 tests: replace filters in testcase files
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 09:51:40 -05:00
Anas Nashif b17e1caf0a sanitycheck: add toolchain keyword to testcases
Some testcases can only be built with certain toolchains. Instead of
using filters, add support for toolchain keyword which enables
whitelisting and exclusion.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 09:51:40 -05:00
Anas Nashif 6c05ccb226 tests: convert testcase.ini to new format
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-28 09:20:36 -05:00
Johan Hedberg 4040610244 Bluetooth: shell: Fix incorrect #define
This should have been upper case and not lower case.

Fixes: ZEP-2322

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-28 09:52:26 -04:00
Paul Sokolovsky b650fa8a72 tests: net: Add test for Sockets API UDP socket/bind/connect/send/recv
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky d950ec2981 samples: net: Add socket-based echo server example
The example source code is POSIX-compatible (modulo include files),
i.e. can be built and behaves the same way for Zephyr and a POSIX
system (e.g. Linux). Makefile.posix is available for the latter.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 49eaa2b722 net: sockets: Explicitly flush conn/pkt queue on close()
If a socket is closed without reading all data from peer or accepting
all pending connection, they will be leaked. So, flush queues
explicitly.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 6055b6cd6b net: sockets: Implement recv() for DGRAM sockets
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 2b4a240859 net: sockets: Implement recv() for STREAM sockets
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 41e88ea40c net: sockets: Implement send()
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 9405887aa7 net: sockets: Add POSIX compat defines for inet_ntop, inet_pton
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 7567962f3a net: sockets: Implement bind(), connect(), listen(), accept()
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 16bb3ec7ec kernel: queue, fifo: Add peek_head/peek_tail accessors
As explained in the docstrings, a usecase behind these operations is
when other container objects are put in a fifo. The typical
processing iteration make take just some data from a container at
the head of fifo, with the container still being kept at the fifo,
unless it becomes empty, and only then it's removed. Similarly with
adding more data - first step may be to try to add more data to a
container at the tail of fifo, and only if it's full, add another
container to a fifo.

The specific usecase these operations are added for is network
subsystem processing, where net_buf's and net_pkt's are added
to fifo.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 4877d6556b net: context: Allow to put context into FIFO at expense of user_data
By moving user_data member at the beginning of structure. With
refcount at the beginning, reliable passsing of contexts via
FIFO was just impossible. (Queuing contexts to a FIFO is required
for BSD Sockets API).

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 386c5bacd1 net: sockets: Add configurable option to provide raw POSIX API names
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 041d38740d net: context, pkt: Changes for Sockets API
Two changes are required so far:

* There's unavoidable need to have a per-socket queue of packets
(for data sockets) or pending connections (for listening sockets).
These queues share the same space (as a C union).
* There's a need to track "EOF" status of connection, synchronized
with a queue of pending packets (i.e. EOF status should be processed
only when all pending packets are processed). A natural place to
store it per-packet then, and we had a "sent" bit which was used
only for outgoing packets, recast it as "eof" for incoming socket
packets.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Paul Sokolovsky 3432ff4fca net: sockets: Bootstrap Sockets API implementation
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-06-28 16:07:55 +03:00
Johann Fischer 3dd51d52a2 drivers: usb: use generic option name for log level
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-06-28 09:02:27 -04:00
Vinayak Kariappa Chettimada 040b85bfbc Bluetooth: controller: Temporarily disable scan req notification
Temporarily, disable scan request notification reports when
LE Advertising Extensions feature is enabled; as support for
enabling scan request notification is not yet added to the
Controller's Link Layer interface functions, yet.

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-06-28 15:00:47 +02:00
Andrzej Puzdrowski 9f964ba8d3 bluetooth: shell: add module for testing NRF5x flash driver
Intention is to test flash driver along with BLE radio.
Added flash shell module with commands for erase, write-check, read and
co-operation with radio stress test.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-06-28 12:29:50 +02:00
Andrzej Puzdrowski 8b7a8448ab Drivers: flash: NRF5x: synchronous mode for co-operation with BLE radio
In added mode flash operation are performed in timeslice
(in radio idle time).
Kconfig for mode enabling CONFIG_SOC_FLASH_NRF5_RADIO_SYNC.

Erase and write API implementations were rewritten and preserved against
concurrent execution.

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-28 12:29:50 +02:00
Andrzej Puzdrowski 7e6b9fa841 Bluetooth: controller: support for code exe. in co-operation with radio
Extend radio ticker nodes for support in-timeslice execution
Added interface for abort the radio
Added interface for check whether the radio is idle

Added interface for get ticker IDs for timeslice ticker node
Added interface for check whether radio ticker is running
Added interface for check whether radio ticker is initialized

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-06-28 12:29:50 +02:00
David B. Kinder abcb8d446e doc: fix sidebar nav issues with board docs
Sidebar navigation for supported boards is wonky: opens to show
all boards (making for lots of scrolling to see the sidebar) and
sidebar items aren't always clickable (as explained in the JIRA
issue).

Fix is to not use multiple toctree directives in boards.rst and
create intermediate architecture-specific supported board docs.

JIRA: INF-132

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2017-06-27 19:21:29 -04:00
Jukka Rissanen cd19a57811 samples: net: mbedtls: Fix server compilation
The code has missing proper conversion from net_buf to net_pkt
that was implemented in commit db11fcd "net/net_pkt: Fully
separate struct net_pkt from struct net_buf"

The sample.yaml had incorrect whitelist string so this is also
fixed here.

Fixes #596

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-06-27 19:20:53 -04:00
Kumar Gala 914d92e488 scripts/sanitycheck: split out log from config-sanitycheck
Put the results of the config-sanitycheck into their own log so we can
see warnings from that stage of the build.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-06-27 19:11:31 -04:00
Johan Hedberg e094560dbc Bluetooth: tests: Fix left-over issues from bt_gatt_service() removal
The new GATT service registration API is bt_gatt_service_register(),
which takes a bt_gatt_service object pointer.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-27 19:10:43 -04:00
Anas Nashif 6ff291a174 tests: do not exclude quark_d2000_crb
quark_d2000_crb does not build net/bluetooth tests by default now.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-27 17:44:23 -04:00
Anas Nashif 3c50f7aa12 tests: samples: remove duplicate filtering
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-06-27 17:44:23 -04:00
Carles Cufi 386c524f93 Bluetooth: controller: Keep track of IRK to RL indices
In order to associate a hit on the hardware IRK filtering with an entry
of the resolving list, add an array of correspondance between the IRKs
and the resolving list entries.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-27 22:26:43 +03:00
Carles Cufi 59ff81ca28 Bluetooth: controller: Add wl bit in resolving list
In order for some of the required checks in the ISR to be performed, we
need to keep track of which of the items in the resolving list are in
the whitelist as well. Track them using a single bit in the resolving
list entries.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-27 22:26:43 +03:00
Carles Cufi 4a016db283 Bluetooth: controller: Add device match ID radio API
In order to obtain the ID (index) of the device matched in a hardware
filter, a new API call has been added along with the required
implementation for nRF5x devices.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-27 22:26:43 +03:00
Carles Cufi 1a07179a3c Bluetooth: controller: Generate RPAs for scanning and initating
Start RPA generation when enabling the scanner either for observing or
for initiating.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-27 22:26:43 +03:00
Vinayak Kariappa Chettimada 4ba2bb0d1c Bluetooth: controller: Be fair when pre-empting a ticker
When force scheduling a ticker use the number of times the
tickers have already skipped their intervals to decide if
the forced ticker can pre-empt the colliding ticker. This
introduces a fairness amongst tickers contesting for the
overlapping time slice.

Flashing in co-operation with Radio needs to be fair in
order to avoid connection supervision timeouts.

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-06-27 21:16:56 +02:00
Vinayak Kariappa Chettimada 95d55a2bfc Bluetooth: controller: Do not skip one-shot tickers with slot
In preparation towards mesh advertise implementation, avoid
one-shot tickers with slots, that have been scheduled to
expire, from being removed by a forced start or update
operation on another ticker.

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-06-27 21:16:56 +02:00
Vinayak Kariappa Chettimada 07270e52ba Bluetooth: controller: Coding style and refactoring
Refactoring of ticker implementation to conform to Zephyr
coding style.

Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-06-27 21:16:56 +02:00
Jukka Rissanen 92fa7ac6ce net: http: Remove mbedtls heap setting from http library
The global mbedtls heap is set automatically now so no need to
set it individually in the http library.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-06-27 16:42:59 +03:00
Jukka Rissanen a9c0a3f9eb ext: lib: mbedtls: Enable and set heap size at device startup
As the mbedtls heap is global for the whole device, enable it
during device startup if configured so. The heap size can be
set in config file. There is no default value for the heap as
that depends very much on application needs.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-06-27 16:42:59 +03:00
Johan Hedberg 8f9c305a15 Bluetooth: Move PRNG initialization a bit later in HCI init
Move the PRNG initialization after reading local supported commands,
so that we don't send HCI_LE_Rand if the controller doesn't support it
(we still need to fail the init however). The patch also removes a few
unnecessary #ifdefs related to crypto.h.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-27 13:16:16 +03:00
Carles Cufi 0f0c45ce7c Bluetooth: controller: Optimize RL addition
To avoid iterating twice through the list, have ll_rl_find() return the
first free empty slot on the list.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-26 15:04:16 +03:00
Carles Cufi 2c1dbd21f4 Bluetooth: controller: Handle Privacy Modes
Add handling of the LE Set Privacy Mode HCI Command along with the logic
required to take it into account when populating the hardware filters.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-26 15:04:16 +03:00
Carles Cufi bd31ad11de Bluetooth: controller: Add RL filter
In order for privacy to work correctly with and without peer IRKs, an
additional hardware filter is required to help match the peer device in
the case address resolution is not possible for a peer since the Host
has not provided a peer IRK for it.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-26 15:04:16 +03:00
Carles Cufi 343a916d48 Bluetooth: controller: Properly remove peer IRKs from RL
When removing a device from the resolving list, if it contained a peer
IRK then it is necessary to update the indices that point to the peer
IRK list, since the list itself is contiguous in memory.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-26 15:04:16 +03:00
Carles Cufi 540a209085 Bluetooth: controller: Add whitelist population with privacy
When using privacy, an additional cache of the actual privacy peers is
required to avoid additional processing in the ISR (since some of the
peers in the whitelist will be disabled by the corresponding privacy
settings). Add the cache and populate the actual whitelist just before
advertising, scanning or initiating a connection.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-06-26 15:04:16 +03:00