The val2 calculation was done using (1000000 / 40960) as
multiplying factor, which was sometimes leading to a
int32 overflow. So, let's use the equivalent (but smaller)
(3125 / 128).
Fix#46615
Signed-off-by: Armando Visconti <armando.visconti@st.com>
If no " character is found in buffer by esp_pull_quoted() it
returns -EAGAIN which causes a loop that never ends. This is because
the buffer dont get filled up with new data so no " chrachter will be
found. This commit changes esp_pull_quoted() to only return -EAGAIN,
so the buffer can get filled with new data and thus the loop can come
to an end.
Signed-off-by: John Johnson <john.filip.johnson@gmail.com>
Allow Block-Wise writes to resources that have enough buffer for
the whole content. Calculate the offset before calling the
content specific write handlers when callback is not set.
Previously only resources with post-write callback were able to
assemble the content.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Both nrf54l15pdk/cpuflpr and nrf54l15pdk/cpuflpr_xip have
watchdog on the list of supported periperals.
As a result, Twister tries to build samples/drivers/watchdog
for these two targets.
Since overlays are missing, build is failing.
Add missing overlay files.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
It is enough to test watchdog driver on the application core.
Otherwise, at least three samples/tests fail due to missing
overlay file for nrf54h20dk/nrf54h20/cpurad.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
The callback is only ever called when we received a
notification from the BASS server that the receive state is
removed, which cannot contain an error code.
Thus it does not make sense for the callback to have an
error code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Store Twister command line options in twister.json report as
`environment.options` object. It allows to keep the actual
execution context for test results analysis and history comparison.
A new command line option `--report-all-options` enables to report all
command line options applied, including these set as default values.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
in many platforms, before the debuger flash, the former testsuite
many already executed, so we will see some old testsuite name.
and we should not compare them directly, instead if we compare in
reversed order them we can avoid such mis-judge.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
- Do not set CONFIG_MBEDTLS_ZEPHYR_ENTROPY in
tests/crypto/mbedtls because this can cause test failure on
real devices in which test thread do not have access to
drivers.
- make MBEDTLS_PSA_CRYPTO_RND_SOURCE depending on
MBEDTLS_PSA_CRYPTO_C because it only makes sense when the
latter is defined
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Fix issue 72083. Update path to zephyr.exe binary using
default domain from domains.yaml file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Pass DIEPTXF address instead of value to sys_read32() to prevent bus
fault when debug logging is enabled.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a build-time assert for verifying that at least one of the supported
devicetree GPIO properties is present on each compatible devicetree node.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
On this board, the CAN transceivers are not GPIO controlled, but passive,
and should not be represented by the "can-transceiver-gpio" compatible (as
this leads to driver compilation warnings due to missing GPIO properties).
Fixes: c8faa1e380
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define the xspi node instead of ospi. Note that RCC CCIPR4 register
keeps the OCTOSP1 for clock domain selection.
Change the header file to xspi for the stm32 devices with xspi
peripheral. Keep the flash_controller/ospi.h for bindings compatibilty.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Introduce a XSPI driver to cover the common XSPI peripherals
of the stm32 mcu: X is for single or quad or octo or hexa
SPI bus access to external memories
DMA not supported in this version
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The new bindings for the stm32 xspi is for new stm32 devices with
XSPI peripherals like the stm32h5 serie. This is close to the octo-spi.
Adapt the flash controller constants to the XSPI model especially.
This is done through a new xspi.h definition file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a simple test intended primarily for checking the nRF temperature
sensor in its nrfs variant but intentionally was made generic enough
that it should be usable with other temperature sensors (after just
providing an overlay) and could be helpful in development of new
temperature sensor drivers, and possibly extended then if needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add driver, together with the corresponding dts binding and node in
the nRF54H20 SoC definiton, for the nRF temperature sensor that cannot
be accessed directly but only through nRF Services (nrfs) layer.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Call `getopt_init()` to reset `state->optind` instead of directly setting
`optind = 1`. The `getopt()` function uses `getopt_state` from
`getopt_state_get` for state handling, so `getopt_init()` should be called
to correctly run the command again.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
According to the `SHELL_CMD_ARG` macro, the `mand` argument of `cmd_dump`
should be 5, including the command name itself, `dump`.
Meanwhile, the `opt` should be 2, as this value describes the optional
field, which is [-w <width>].
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Force `\r\n` byte sequence for newline for the Xtensa simulator console
driver. This effectively mirrors the behavior of the UART console driver.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit makes the devicetrees of the targets that are based on the QEMU
`virt` machine more consistent with the rest of the RISC-V targets in
Zephyr by:
* adding the `riscv,isa` property
* adding a compatible string which uniquely identifies the `virt` core
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Be able to configure the clock frequency during runtime
using `i2c_configure()` and be able to use `i2c_get_config()`
of the i2c api for the esp32.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added a switch that show failed/error report from the last run.
Default shows all items found. However, you can specify the number of items
(e.g. --report-summary 15).
It also works well with the --outdir switch
Signed-off-by: Kamil Paszkiet <kamilx.paszkiet@intel.com>
Fixes a bug where more than one thread trying to access
different PWM devices can cause erroneous behavior.
Co-authored-by: James Goppert <james.goppert@gmail.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Add a test of FLASH_STM32_EX_OP_BLOCK_OPTION_REG and
FLASH_STM32_EX_OP_BLOCK_CONTROL_REG extended operations for stm32f4.
It verifies that the Option Byte and Control registers are blocked
correctly. The registers can be unlock after reboot, so it is needed
to separate this test from other tests.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Select that the STM32 driver has extended operations feature when
the FLASH_STM32_BLOCK_REGISTERS is set.
It allows using only block registers extended operation.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
This commit adds the token for uploading to codecov.io because codecov now
requires a token and rejects any upload requests without one.
It also updates the codecov-action version from v3 to v4, which is required
for using a "global upload token."
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add support for USDHC0 controller on FRDM_MCXN947 board. This support
was verified using the `tests/subsys/sd/sdmmc` and
`tests/subsys/sd/sdio` testcases. Note that this board does not ship
with the SD header (J12) populated by default, so the user must populate
one.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add USDHC0 node to the mcxn94x devicetree. This node describes the one
instance of the Ultra Secured Digital Host Controller IP present on the
MCXN94x series SOCs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some instances of the USDHC peripheral take longer to reset, and will
timeout with the previous delay of 100 cycles. Extend this delay to 1000
cycles to resolve this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove function for waiting for clock gate, as this is not used anywhere
within the USDHC driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some USDHC IP instances do not have the voltage control bit present, as
they can only operate at 3.3V. Move code to select 1.8V mode into a
separate helper, and guard the call to UDSHC_SelectVoltage() behind a
feature macro from MCUX SDK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CSI can connect to either a camera sensor (as on i.MX RT10xx) or
a MIPI CSI-2 receiver (as on i.MX RT11xx). To be generic, change the
naming from sensor to source.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Sebastian Głąb