if we are using command line platform filter, no need to list every
other platform as excluded, we know that already. Show only the
discards that apply to the selected platforms on the command line
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we load tests from a file, we do not have the discarded list, this
would have been done already when saving the test file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most boards enable the pinmux by default by setting CONFIG_PINMUX=y in
<board>_defconfig, but several boards did it in Kconfig.defconfig
instead. Several code reviews, such as #5043, have suggested using a
select in Kconfig.board to enable the pinmux, however this caused
warnings:
warning: (BOARD_LPCXPRESSO54114) selects PINMUX which has unmet direct
dependencies (BOARD_FRDM_K64F || BOARD_FRDM_KL25Z || BOARD_FRDM_KW41Z ||
BOARD_HEXIWEAR_K64 || BOARD_USB_KW24D512 || BOARD_GALILEO)
Fix how these boards enable the pinmux so they are more consistent with
other boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Running this testcase on qemu without userspace enabled it
crashes. The testcase was modifing page table information
of the bss region. This in turn caused some variables to be
inaccessible. Fixed it by moving the page manipulation to a
different location.
GH-5646
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
$ENV{ZEPHYR_BASE} was recently search-replaced with ${ZEPHYR_BASE},
but some CMake code, like usage.cmake, is run by a seperate CMake
build system that does not have access to the CMake variable
ZEPHYR_BASE.
This patch reverts the usage of ${ZEPHYR_BASE} back to use
$ENV{ZEPHYR_BASE} in usage.cmake.
This has been proven to work on both Windows and Linux.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit refactors the nRF5 radio driver of Bluetooth controller
to use symbolic names for PPIs. It also revisits the Radio hardware
timing constants to align with experimental measurements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add configuration for zperf sample allowing to build USB dongle with
zperf for testing.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This commits adds the "least common denominator" in the
stm32fX.dtsi files and fills the additional SPI nodes
in stm32fXYZ.dtsi files, only for the SOCs where boards
use the additional SPI peripheral.
We could add the rest SPI nodes in the stm32fXYZ.dtsi
files when we add SPI support to other boards.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This reverts commit 5e545e47fb.
This is breaking some tests, needs to be retested with latest master.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _vector_start was placed before the CONFIG_TEXT_SECTION_OFFSET, thus
adding the offset in the relocated vector table, making the table
invalid when relocated with a non null CONFIG_TEXT_SECTION_OFFSET.
This was tested using MCUboot with a 0x200 offset for the image header.
Fixes: eb48a0a73c ("arm: armv6-m: Support relocating vector table")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reusing the k_thread structure requires a cleanup of all essential
info. We need to remove the ztest_thread information from the timeout_q.
If left untouched, when a tick occurs the thread's delta_ticks_from_prev
would be corrupted. This inturn causes a chain reaction of problems.
Thus once the unit test is completed the timeout_q is scrubbed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This issuse is found in arch/arc's memory domain api support.
For arc, dwarf-2 is used to keep compatible with synopsys metaware
mdb debugger. However, the gen_kobject_list.py cannot generate the
correct information from dwarf-2, because loc.form's value is
DW_FORM_block1.
If dwarf-4 is adopted, there is no issuse.
Other arch and tools may use dwarf-2 and face the same issuse, so
this commit is created.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Run Kconfig on every reconfigure but with different fragments
depending on the situation.
When .config is missing or when a file from merge_config_file has been
modified use the merge_config_file's as input, otherwise use .config
as input.
This should match the behaviour before kconfiglib.py was introduced
and fixes#5673.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix in the prj.conf so the test will also work in boards which
by default compile a BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The new native Windows development environment no longer relies on MSYS2
or WSL at all. Instead it uses a standard Command Prompt and Windows
native tools. Document the installation and setup process in order to be
able to compile and develop.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'conf' is part of the zephyr SDK or need to be built and installed in
the path. We now using python for Kconfig processing, so this is not a
strict requirement and we should be able to build without it. If the
binary is not found, just go on with our business.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Make it possible to run in other posix boards.
By default, if the POSIX board does not define the TICK_IRQ
just run without that part of the test, printing a note.
The place where other POSIX boards should define it, is also
clear, and should be easy to keep those lines free from merge
conflicts in the future.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test should be blacklisted for any board based
on the POSIX arch, not just the native_posix board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When checking if a testcase passed or failed, allow there
to be prefixes or postfixes in the line, around
PROJECT EXECUTION SUCCESSFUL/FAILED
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
BT does use a semaphore, which does cause the count of sempahores to
fail, disable BT here to only keep locally created objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Anas Nashif